Kent · England
Bicknor Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing for homeowners, landlords and businesses in Bicknor. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- A messy, uneven bead from a previous reseal
- Splits where the tray meets the wall
- Sealant that has split, shrunk or peeled away
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
About our bathroom resealing in Bicknor
Homes in Bicknor have the same weak spots as anywhere else: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Each one is stripped, cleaned and dried before new silicone goes in. If you are dealing with lumpy, uneven sealant from a DIY attempt and leaking joints on a shower screen, we can put it right, whatever the surface.
For a small place like Bicknor, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
Each job carries a 12-month guarantee, large or small.
- Location
- Bicknor (ME9)
- Region
- Kent
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
When something else is needed
Sealant is not the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- Cracked or missing grout between tiles (that’s regrouting)
- Water coming from the plumbing rather than the joint
- Cracks in the tray itself rather than the joint
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly.
Where we work in Bicknor
- Kitchen worktops & upstands
- Baths
- Wet rooms
- Basins & vanity units
- Sinks & splashbacks
- Shower trays & enclosures
What happens on the day
There’s no need to move everything out before we come, only the area right around the joints. Everything nearby is protected, and the job takes two to three hours for a typical bath, depending on how much old sealant there is in most cases. Somewhere as small as Bicknor, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by protecting the area and stripping out the old bead.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We tidy up and give you the cure time, usually around 24 hours.
Getting ready for the visit
- Clear the area around the work
- Plan for the work area to be out of bounds to pets and children
- Tell us about any previous sealing or DIY attempts
Getting a quote
To get a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. We’ll give you a clear price before any work starts.
Advice
Common questions in Bicknor
Can you help a landlord with a rental near Hollingbourne station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we will send you a clear quote.
Will you come out to Bicknor?
Yes. Bicknor is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Does the resealing come with a guarantee?
Yes. Our 12-month guarantee covers every job, and we’re ARBOMaster approved applicators.
Can I add another job to the visit?
Yes. More than one area can be quoted together.
Is there any odour?
That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.
What does bathroom resealing cost?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote.
Will you leave a mess?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Can you work on commercial sites?
Yes. We’ve worked for hotels, offices and other businesses, and we are fully insured.
Bathroom resealing around Bicknor
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Rented homes near Hollingbourne station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. Homes close to Church of St James include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Bicknor is about 4 miles south-west of Sittingbourne, in Kent. We provide bathroom resealing to householders, landlords and businesses in Bicknor, as part of our work across Kent. Across Kent, we cover 922 places, and Bicknor is one of them. There’s also a page for Chelmsford, about 32 miles away.
All of ME9 is within our area for bathroom resealing. Nearby, we also carry out bathroom resealing in Hucking (1 mile west), Wormshill (1 mile south-east), Broad Street (2 miles south-west), Hollingbourne (2 miles south-west) and Eyhorne Street (3 miles south-west). We also work in nearby towns such as Maidstone (6 miles west), Ashford (14 miles south-east), Sittingbourne (4 miles north-east), Faversham (9 miles east), Minster (10 miles north-east) and Kings Hill (12 miles west).
Landmarks near Bicknor
The closest station to Bicknor is Hollingbourne station, about 2.8 miles south-west of the centre. Well-known places in the area include Leeds Castle (3.7 miles south-west) and KIMS hospital (4.9 miles west). Open spaces near Bicknor include Detling Hill.
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
How we quote for bathroom resealing
We don’t publish a price list, because jobs vary so much. The quote depends on:
- Any working-time requirements on site
- The number and length of the joints
- How many rooms, windows or areas are involved
- Whether the work is at height
The cost depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
What to tell us for a quote
There’s no need for technical detail. Just tell us:
- A few pictures by email, if you can
- The address or postcode of the job
- Any previous sealing or DIY work
- The rough size of the job
Getting a quote is simple: tell us what needs doing and where and its rough size. Photos by email help us understand the job, and we will take it from there.
Why it’s worth doing now in Bicknor
You do not need a new bathroom because the sealant looks bad. A new bead often brings the whole room back. If something else is wrong, we will tell you. Where a wall is exposed, as many are in small places like Bicknor, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Doing several joints on one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. We’ll send you a clear quote for the lot.
Why choose Mr Mastic in Bicknor
- 20+ years of sealant experience
- We never seal over old sealant
- Tidy, careful work
- Anti-fungal silicone where joints get wet
See what affects the cost and our reviews.
Also in Bicknor
Surface by surface
Kitchen worktops & upstands
The joint between worktop and wall takes splashes, crumbs and cleaning sprays. We seal them in a colour that suits the worktop.
Shower trays & enclosures
The vertical joint where a screen profile meets the wall is a common leak point. It’s resealed along with the tray joints, following the enclosure maker’s guidance on which side to seal.