Kent · England
Wormshill Floor Joint Sealing
Problem with your floor joints in Wormshill? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Gaps at thresholds between rooms
- Failed seals where bathroom floors meet baths and panels
- Dirt and water collecting in open floor joints
About our floor joint sealing in Wormshill
Where skirting is painted, we can use a flexible sealant that takes paint. For bathrooms and kitchens, silicone is usually the better choice, which is not made to be painted. We work on commercial floors, concrete floor joints and thresholds, and people most often call us about failed seals where bathroom floors meet baths and panels and cracked grout where a tiled floor needs a movement joint.
Work in a small place like Wormshill just needs the journey and access planning, and the work itself is the same as on any site.
All our work is covered by a 12-month guarantee, wherever you are in Kent.
- Location
- Wormshill (ME9)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Landlords, agents and businesses in Wormshill
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will give you a quote.
We also work for property managers and facilities teams. Several sites can go on one quote, and we are fully insured.
Your questions about floor joint sealing in Wormshill
I let a flat near Harrietsham station. Can you help?
Yes. We work for letting agents and landlords as well as homeowners, and several properties can be quoted together. You can phone 0345 464 0079 or email us with the details for a clear quote.
Will you come out to Wormshill?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Will I be able to paint over the new joint?
For painted skirting, we use a flexible product that can be painted. Silicone won’t take paint, so we use it where the joint stays unpainted.
Are you fully insured?
Yes. Mr Mastic is fully insured.
Can new sealant go over the old?
No. Fresh sealant does not stick to old sealant, and anything trapped underneath, including mould and water, stays there. We remove it all first.
How long will you be here?
As a guide, most jobs take a morning or an afternoon for most homes. Bigger jobs take longer, and we will tell you how long to expect.
Do you take out the old sealant first?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
What information do you need?
The location, the problem and the rough size of the job. Photos by email help too.
What happens if it’s left?
An open concrete floor joint gets wider every time something heavy crosses it. Resealing it early protects the edges. Where a wall is exposed, as many are in small places like Wormshill, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Combining jobs into one visit is generally more efficient than separate visits, so it’s worth mentioning everything you’d like done. We will give you a clear quote for the lot.
Why Wormshill customers choose us
- Quality sealants from Arbo and Everbuild
- Experience in homes, commercial sites and hotels
- Any old sealant cut out fully, not covered over
- More than 20 years in sealant work
DIY sealant or a professional job?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Different surfaces, different methods
Tiled floors
Large or heated tiled floors need room to move. We replace grout with flexible sealant along the right lines in a matching colour.
Wet room and bathroom floors
Mop water gets into any open joint at the edge of a bathroom floor. A neat silicone joint keeps it out.
How to look after the new joints
No joint lasts for ever, but care makes a real difference. A few tips:
- Check skirting joints after the heating season
- Keep dirt out of the joints
- Act on grout cracks that run in a straight line
- Cone off fresh joints until they’re ready
Keep heavy furniture from dragging across the joints. Dragging can tear the bead especially in the first few days.
A tiled floor that cracks along a line will keep cracking until it can move. A flexible joint added early helps protect the tiles themselves.
When it is not the sealant
A few problems are outside what sealant work can do:
- Structural movement or subsidence
- Tiles that have lifted or broken
- Floors that are uneven or need levelling
If in doubt, phone 0345 464 0079 or drop us an email and we’ll say what we think before you book.
What we seal
- Commercial floors
- Wet room & bathroom floors
- Tiled floors
- Thresholds
- Skirting boards
- Concrete floor joints
Also near Wormshill
What else we do in Wormshill
Floor joint sealing around Wormshill
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
Community buildings like St Giles are part of the picture too: floor and skirting joints in halls and kitchens wear like any others. Rented homes near Harrietsham station change hands often, and a tidy floor and skirting joint helps a rental look ready for the next tenant.
Wormshill is about 4 miles south-west of Sittingbourne, in Kent. Every kind of property in Wormshill is covered for floor joint sealing, old or new, large or small. Every job comes with our 12-month guarantee. 922 places in Kent are on our list, from the larger towns to small villages. There’s also a page for Chelmsford, roughly 33 miles from Wormshill.
Work in ME9 is quoted and booked the same way as anywhere else. Whether your property is on The Street, Dray's Field and Bottom Pond Road or a nearby road, our applicators can take on the job. Other places close to Wormshill include Bicknor (1 mile north-west), Hucking (2 miles west), Hollingbourne (3 miles south-west), Marley (3 miles south) and Harrietsham (3 miles south). Larger places within reach include Maidstone (7 miles west), Ashford (12 miles south-east), Sittingbourne (4 miles north-east), Whitstable (15 miles east), Faversham (9 miles east) and Minster (10 miles north-east).
Local landmarks in Wormshill
Typical jobs here are in homes near The Blacksmith's Arms Public House, among other places. The nearest railway station is Harrietsham station, roughly 2.9 miles south. Well-known places in the area include KIMS hospital (6 miles west) and Leeds Castle (3.7 miles south-west). Green spaces nearby include Detling Hill.
What we do, step by step
Before we leave, we go over the finished joints with you and explain the cure time. The visit itself usually takes a morning or an afternoon for most homes, depending on the amount of work. For a village or hamlet like Wormshill, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First we check the joint and the floor and agree which sealant suits it.
- Old caulk, grout or sealant is removed from the joint.
- The joint is cleaned, vacuumed and backed where depth needs controlling.
- The sealant goes in, chosen for the floor and coloured to suit it.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
Getting ready for the visit
- Tell us about any previous sealing or DIY attempts
- Move anything stored near the joints
- Let us know about stairs, lifts or work at height
How to get a quote
For a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before any work starts.