Kent · England
Bathroom & kitchen resealing in The Brents, Kent
Professional bathroom resealing in and around The Brents, with old sealant always removed completely and a 12-month guarantee.
- Water getting behind the bath panel
- Failed sealant on the screen profile
- Two layers of silicone, both failing
Leave it or put it right?
A failed joint gets more costly to put right the longer it’s left. Water that gets behind a bath soaks into the floor, the panel and sometimes the ceiling below, turning a small job into a building repair. Homes in smaller places like The Brents can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Leaving a failed joint normally makes the job bigger, not smaller, because water and mould keep working on it. If you are not sure whether it needs doing, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
Why The Brents clients choose us
- We’re fully insured
- White, clear, grey or coloured to suit, where the product allows
- 4.9 on Google from 180+ five-star reviews
- We agree the colour with you first
Take a look at our cost guide or what customers say.
Bathroom resealing in The Brents
Mr Mastic has more than 20 years’ experience of sealant work, and our applicators reseal bathrooms and kitchens across The Brents. We are ARBOMaster approved and fully insured, and the work comes with a 12-month guarantee. If you are dealing with failed sealant on the screen profile and damp behind the bath or under the tray, we can put it right, on shower trays & enclosures, kitchen worktops & upstands and sinks & splashbacks alike.
Homes around The Brents range from older cottages to more recent houses. Older homes can move a little with the seasons, which is hard on tired sealant and rigid grout.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we’ll put it right.
- Place
- The Brents (ME13)
- Wider area
- Kent
- Cover
- One year on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Also in The Brents
When to call us in The Brents
Sealant laid on a damp, dusty or greasy joint never bonds properly. Traces of soap, bath oil and old sealant stop it gripping, so a rushed job can start to lift early.
The most common problems we see are:
- Water getting behind the kitchen upstand
- A messy, uneven bead from a previous reseal
- Two layers of silicone, both failing
- Black spots spreading through the bead
Letting a property close to Faversham station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Comparing quotes
- How hidden problems are handled
- How long the guarantee is
- Whether VAT is included
- How the joint is cleaned and prepared
Work for landlords, hotels and businesses
We also work for property managers and facilities teams. Several sites can be quoted together.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
How we quote for bathroom resealing
Every job gets its own quote. These are the things that affect it:
- Whether old sealant or filler has to be cut out
- Which sealant suits the joint
- Whether there’s mould to deal with
- The amount of work
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference.
What we need to know
What to tell us when you ask for a quote:
- The type of property
- The address or postcode of the job
- How we’d reach the joints
- How many joints, rooms or windows are involved
To get a quote, ring 0345 464 0079 or email us with the location and a short description of the problem. We’ll give you a clear quote before any work starts.
Bathrooms and kitchens in The Brents
The Brents is within about 3 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
If you look after a building such as Davington Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Homes close to Faversham Parish Church include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
The Brents is about 1 mile north-east of Faversham, in Kent. We provide bathroom resealing to homeowners, landlords and businesses in The Brents and the surrounding area. Across Kent, we cover 922 places, The Brents among them. For nearby work, see our Chelmsford page, about 34 miles away.
Every address in ME13 is within our area for bathroom resealing. Bathroom resealing is available to properties on Ham Road, Back Lane and Quay Lane and the roads around them. Close by, we work in Davington (1 mile west), Faversham (1 mile south-west), Preston (1 mile south), Oare (1 mile north-west) and Ospringe (1 mile south-west). We also work in nearby towns such as Ashford (12 miles south), Canterbury (9 miles east), Sittingbourne (7 miles west), Whitstable (6 miles east), Herne Bay (11 miles east) and Minster (8 miles north-west).
Landmarks near The Brents
Locally, jobs take us to homes and businesses close to The Brents Tavern, Oare Meadow and Queen Elizabeth's Grammar School and the streets around them. For rail, the closest station is Faversham station, about 0.6 miles south. A little further out are Newnham Castle (4.6 miles south-west).
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Honest limits
A few problems are outside what sealant work can do:
- Loose or hollow tiles, or failed tanking behind them
- A tray or bath that is cracked through
- Cracked or missing grout between tiles (that is regrouting)
If you’re not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer before you book.
What we seal
- Baths
- Sinks & splashbacks
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Kitchen worktops & upstands
How it works
There’s no need to move everything out, only the area right around the joints. We protect the rest, and the work takes two to three hours for a typical bath, depending on how much old sealant there is in most cases. In a smaller place like The Brents, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We protect the area and cut out all of the old sealant.
- We clean and degrease the joint and treat any mould.
- We let it dry fully and fill the bath with water before sealing.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- We clear away and tell you when it can get wet, usually after around 24 hours.
How to prepare
- Mention any tricky access
- Clear items away from the joints we’re working on
- Mention if the joints have been sealed before
Getting a quote
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll explain what’s involved before giving you a price.
Related advice
The Brents: your questions answered
Do you take on hotel work around The Brents?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
Is The Brents within the area you cover?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
How long before the new sealant can get wet?
Silicone is touch-dry quite quickly, but it takes longer to cure. Keep water off it for around 24 hours, or follow the cure time we give you.
Can I do it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
What information do you need?
Just the basics: where it is, what you’ve noticed and how we reach it. Then call 0345 464 0079 or drop us an email.
Which products do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice.
Is white the only colour available?
White, clear and a range of colours are available. Where the joint is on show, we match it to the surface.
Do the sealants smell?
Possibly a little. Any smell clears as the sealant cures.