Kent · England

Bathroom & kitchen resealing in Ospringe, Kent

Bath, shower, basin, wet room, worktop and sink resealing in Ospringe, with a one-year guarantee on every job. Call for a quick quote.

  • Damp behind the bath or under the tray
  • A messy, uneven bead from a previous reseal
  • Mouldy sealant that has gone black

Need bathroom resealing in Ospringe?

About our bathroom resealing in Ospringe

We fill the bath before sealing it. A full bath sits slightly lower than an empty one, so the bead isn’t stretched the first time someone gets in. Quick jobs often leave it out, and it makes a real difference. We’re often asked to deal with a joint torn by a bath that flexes and a reseal done over the top of the old bead, on sinks & splashbacks, baths and wet rooms.

Even in a smaller place like Ospringe, bathrooms and kitchens see heavy daily use. Older or newer, every room gets the same approach: all the old material out, the joint cleaned and dried, then new sealant or grout.

All of our work is guaranteed for twelve months, in Ospringe and everywhere else we cover.

Where
Ospringe (ME13)
Wider area
Kent
Guarantee
A year, on every job
Quotes
A clear quote up front
Telephone
0345 464 0079
Last updated
26 October 2026
Fresh white silicone going into the corner where a shower screen meets the tiled wall

Bathroom resealing around Ospringe

Ospringe has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

If you live in an older home near Church of St Peter and St Paul, walls and floors in older homes can move, and sealant and grout show it first. If you look after a building such as Ospringe Church of England Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. If you let a flat or house near Faversham station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.

Ospringe is about 1 mile south-west of Faversham, in Kent. Ospringe gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Ospringe is one of 922 places in Kent we cover for bathroom resealing. Chelmsford is on our list too, around 34 miles away.

Jobs for bathroom resealing in ME13 works the same way as everywhere else we cover. Bathroom resealing is available to properties on Water Lane, Lower Road and Capel Road. Other places close to Ospringe include Whitehill (1 mile south), Faversham (1 mile north-east), Davington (1 mile north-east), Brogdale (1 mile south) and Preston (1 mile east). Within a short drive, we also cover Maidstone (15 miles west), Ashford (12 miles south), Canterbury (9 miles east), Sittingbourne (6 miles west), Whitstable (7 miles north-east) and Herne Bay (12 miles east).

Landmarks near Ospringe

Around Ospringe, our work takes us to homes and buildings near Oare Meadow, The Abbey School and Maison Dieu pub, among other places. Ospringe’s nearest station is Faversham station, about 0.8 miles east of the centre. A little further out are Newnham Castle (3.5 miles south-west).

Map of Ospringe © OpenStreetMap contributors

Work for landlords, hotels and businesses

Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.

How the visit works

You don’t need to clear the whole room or building before we come, just the space around the work. We protect the rest, and the work takes a couple of hours for a single bath or shower for a typical job. A visit to Ospringe is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.

  1. We start by protecting the area and stripping out the old bead, including the film left on the tiles.
  2. We clean and degrease the joint and treat any mould.
  3. The joint is left to dry, and baths are filled with water first.
  4. We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
  5. We tidy up and give you the cure time, generally around 24 hours.

Preparing for the visit

  • Mention any leaks or damp you’ve noticed
  • Let us know about earlier repairs to the joints
  • Where the joints are inside, avoid wetting them before we arrive

How to get a quote

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. Whenever you are ready, call 0345 464 0079 or drop us an email.

Ask for a quote

Related advice

How to look after the new joints

To keep the joints looking good and working properly:

  • Wait for the cure time we give you
  • Keep the fan on for a while after bathing
  • Keep scourers and sharp tools away from the bead
  • Keep bottles off the sealant line

Mould needs damp, so keep the room aired. Use the fan, or open a window, while you bathe and for a while afterwards, so the bead dries out between uses.

Don’t wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and replacing it when it fails protects the rest of the room.

How the job changes by surface

Shower trays & enclosures

A tray that rocks will split any sealant. We check for movement before we reseal, and tell you if it needs re-bedding first.

Sinks & splashbacks

Where a splashback meets the worktop, there’s a joint that catches every splash. It’s resealed in white, clear or a colour to suit.

DIY sealant or a professional job?

A DIY attempt does not rule out a professional job. We remove it and do the joint properly.

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.

Ospringe: your questions answered

Do you work for hotels and guest houses in Ospringe?

Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.

Can you help a landlord with a rental near Faversham station?

Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can call 0345 464 0079 or drop us an email with the details for a clear quote.

Does someone need to be in?

If the work is inside, we need someone to let us in. Once we have agreed the job, you don’t need to watch us work.

Can mouldy silicone be sorted out?

Yes, we replace the mouldy bead. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Good ventilation helps keep it away.

Is the work guaranteed?

Yes. All our work comes with a 12-month guarantee, and we’re fully insured.

Do you reseal kitchen worktops and sinks too?

Yes. Next to the sink we use a food-safe product where it’s needed.

Can you just seal over the old silicone?

No, never. A bead laid over old silicone soon starts to come away. We remove the old bead completely before resealing.

What information do you need?

Only a few details: where it is, what you’ve noticed and how we reach it. Then ring 0345 464 0079 or email us.

What happens if it’s left?

Tired sealant is not a reason to replace a bath or shower. Replacing the joint is normally all it takes, as long as the fittings themselves are sound. If something else is wrong, we will tell you. Homes in smaller places like Ospringe can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.

Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we will explain what it covers.

What you get with us

  • Anti-fungal silicone where joints get wet
  • Over 20 years’ experience
  • A sealant colour to suit the surroundings
  • Trusted Arbo and Everbuild sealants

See our cost guide and our reviews.

What affects the cost of bathroom resealing

We do not publish a price list. The quote depends on:

  • The type of sealant required
  • Mould in or behind the old joints
  • The number of rooms or windows
  • Whether the work is at height

The cost reflects the work involved, not guesswork. That’s why we ask about the job first and agree the price before starting.

Asking for a quote

Before you ask for a quote, have a think about:

  • How many joints, rooms or windows are involved
  • How we’d reach the joints
  • Where the property is
  • Whether it’s a home or a business

For a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. You’ll have a clear quote before any work starts.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job