Oxfordshire · England
Thame Bathroom Resealing
Bathroom resealing for Thame, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Cracked, shrunken or lifting silicone
- Lumpy, uneven sealant from a DIY attempt
- Water getting behind the bath panel
Bathroom resealing in Thame, done properly
Sealant is the soft line between a bath, shower or worktop and the wall. Once it cracks or goes mouldy, water starts to find its way through. Every trace of the old sealant is taken out and replaced with anti-fungal sanitary silicone. We work on wet rooms, baths and kitchen worktops & upstands, and people most often call us about water getting behind the bath panel and water escaping at the shower enclosure.
Thame mixes older houses with estates built more recently, and bathrooms range from decades-old suites to brand-new ones. Either way, the sealant and grout are generally the first things to fail.
There’s a 12-month guarantee on every job, large or small.
- Where
- Thame (OX9)
- Region
- Oxfordshire
- Cover
- 12 months on all our work
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Keeping the joints in good condition
A little care helps the new joints last. We recommend:
- Keep an eye on the corners, where splits start
- Keep bottles off the sealant line
- Run the extractor fan during and after every shower
- Dry the bead with a towel now and then
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the bead dries out between uses.
Each shower pushes a little more water through a failed joint. Over time that water reaches floors, walls and ceilings. Early resealing closes the gap before damage is done.
Landlords, agents and businesses in Thame
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
We also work for property managers and facilities teams. Several sites can be quoted together, and we are fully insured for the work.
Common problems we fix in Thame
Sealant laid on a damp, dusty or greasy joint never bonds properly. Traces of soap, bath oil and old sealant stop it gripping, and a joint that looked fine soon begins to come away.
Look out for these signs:
- Cracked, shrunken or lifting silicone
- Shrunken sealant along the back of a worktop
- Black mould in the silicone that won’t clean off
- Damp behind the bath or under the tray
Homes close to Church of St Mary include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Before booking anyone
- The length of the guarantee
- When the joint can take water or movement
- Whether they seal over old material or remove it
- How much experience the applicator has
When it isn’t the sealant
We will always be straight with you, so here’s what sealant can’t fix:
- Loose or hollow tiles, or failed tanking behind them
- Water getting in through the grout rather than the sealant
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If you are not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer.
What we seal
- Wet rooms
- Shower trays & enclosures
- Baths
- Kitchen worktops & upstands
- Basins & vanity units
- Sinks & splashbacks
The process
Once we’re on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take two to three hours for a typical bath, depending on how much old sealant there is. In Thame, parking is rarely complicated, though it helps to know about driveways or restrictions, and mention if the work is upstairs, in a flat or high on the outside.
- We start by protecting the area and stripping out the old bead.
- Next, the joint is cleaned and any mould is treated.
- We let it dry fully and fill the bath with water before sealing.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We tidy up and give you the cure time, normally around 24 hours.
Before we arrive
- Tell us if parking is tricky
- For business premises, tell us about site rules or sign-in
- Mention if the joints have been sealed before
Ask for a quote
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll talk you through the work.
Related advice
Why it’s worth doing now in Thame
The difference in a professional reseal is mostly what you don’t see: cutting out every trace of the old bead, cleaning, treating mould and letting the joint dry. Without that preparation, the new bead won’t last. Around Thame, failed sealant lets water into hidden places, such as under the floor, behind a panel or into a wall. Left alone, that means rot, damp and a bigger repair.
The cost depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.
Why book with us
- Sanitary silicone with an anti-fungal additive in wet areas
- We agree the colour with you first
- 20+ years of sealant experience
- Sealant colour chosen to suit
Read our cost guide or our reviews.
What affects the quote in Thame
The quote reflects the job in front of us. We look at:
- The type of sealant required
- When we can work, for business premises
- Whether the work is at height
- The size of the job
A failed joint rarely gets cheaper to fix by waiting. If you’re not sure whether it needs doing, call 0345 464 0079 or email us and we will give you an honest view and a quote.
What to tell us for a quote
When you call or email, it’s useful to know:
- Roughly how big the job is
- A few pictures by email, if you can
- What’s wrong with the joints now
- Whether it’s a home or a business
If you are in Thame and need bathroom resealing, phone 0345 464 0079 or email us. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Other services in Thame
Thame homes and their sealant
There are hotels and other places to stay in and around Thame. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as Barley Hill Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Rented homes near Haddenham & Thame Parkway station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Thame is about 8 miles south-west of Aylesbury, in Oxfordshire. For bathroom resealing in and around Thame, it’s easy to get a quote: please call 0345 464 0079 or send us an email. We’re based in Crawley and cover Oxfordshire. Our area takes in 443 places across Oxfordshire, large and small. Oxford is on our list too, about 11 miles from Thame.
Postcode districts we cover here for bathroom resealing: OX9. Local streets include Upper High Street, Butter Market and High Street, and we cover them all. Main roads around Thame include the A329 and A418. Nearby, we also carry out bathroom resealing in Moreton (1 mile south-west), Towersey (1 mile east), Kingsey (2 miles east), Long Crendon (2 miles north-west) and Haddenham (3 miles north-east). Within a short drive, we also cover Oxford (11 miles west), Didcot (15 miles south-west), Bicester (13 miles north-west), Abingdon-on-Thames (14 miles west), Henley-on-Thames (15 miles south) and Kidlington (14 miles west). As one of the bigger places in Oxfordshire, Thame has every kind of property, from flats to offices.
Near you in Thame
In Thame, that means homes and buildings near Lord Williams's School and Cross Keys Public House, among other places. Thame’s nearest station is Haddenham & Thame Parkway station, about 2.1 miles north-east. Nearby you’ll also find Thame Museum (0.5 miles north-west) and Thame Community Hospital (within half a mile south-east). Open spaces near Thame include Snakemoor.
Thame questions
I let a flat near Haddenham & Thame Parkway station. Can you help?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we will send you a clear quote.
Do you cover Thame for bathroom resealing?
Yes, Thame is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or send us an email and let us know what needs doing, and we’ll give you a clear price.
Where are you based?
We are based in Crawley, and we work across South East England, London and Scotland.
Can mouldy silicone be sorted out?
Yes. We strip the bead, treat the joint and lay new anti-fungal silicone.
Do you have insurance?
Yes. We’re fully insured for domestic and commercial work.
Do you work for hotels and businesses?
Yes. Hotels, offices and other businesses use us.
How do I get a quote for bathroom resealing in Thame?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we will talk you through it.
What should I tell you?
Tell us what needs doing and where, with photos by email if possible. We will ask anything else we need to know.