South Lanarkshire · Scotland

Bathroom & kitchen resealing in Rigside, South Lanarkshire

Problem with your baths, showers and worktops in Rigside? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.

  • Smears of silicone across the tiles
  • Black spots spreading through the bead
  • New sealant laid over old sealant that is now lifting

Need bathroom resealing in Rigside?

Bathroom resealing in Rigside, done properly

We fill the bath before sealing it. The weight settles the bath to its lowest point, so the new joint isn’t pulled apart the first time it’s used. It’s a small step that rushed reseals tend to skip. If you have water escaping at the shower enclosure and smears of silicone across the tiles, we can help.

A bathroom in a place like Rigside gets the same daily wear as one in a city flat. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.

A one-year guarantee comes as standard, so you’re covered after we have gone.

Where
Rigside (ML11)
Region
South Lanarkshire
Cover
One year on every job
Quote
A clear price before work begins
Email
info@mrmastic.co.uk
Last updated
26 October 2026
Mr Mastic applicator sealing the vertical joint between a glass shower screen and tiled wall

Why deal with it now?

Tired sealant is not a reason to replace a bath or shower. Replacing the joint is usually all it takes. If something else is wrong, we’ll tell you. In a place like Rigside, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.

The cost depends on the amount of work, how hard the old material is to remove and access to the work. We give a clear quote before any work starts.

Why Rigside customers choose us

  • Anti-fungal sanitary silicone in wet areas
  • We agree the colour with you first
  • We’re fully insured
  • Arbo and Everbuild products

Read how sealant jobs are priced and customer reviews.

Quotes for bathroom resealing in Rigside

Some jobs are bigger than they look, and some smaller. What affects the quote:

  • Any working-time requirements on site
  • The number of rooms or windows
  • Whether the work is at height
  • Which sealant suits the joint

What you pay reflects the work, not a rough estimate. That’s why we ask about the job first.

What to tell us for a quote

The more you tell us, the more accurate the quote. When you ask for a quote, tell us:

  • How many joints, rooms or windows are involved
  • Where the property is
  • Whether it has been sealed before
  • If it’s domestic, commercial or a hotel

Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. Whenever you are ready, drop us a line at info@mrmastic.co.uk.

Your questions about bathroom resealing in Rigside

Is Rigside in your area for bathroom resealing?

Yes, Rigside is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job, and we will give you a clear price.

Is there a guarantee on bathroom resealing in Rigside?

Every job comes with our 12-month guarantee, wherever it is. We are fully insured, and an ARBOMaster approved applicator.

Are you ARBOMaster approved?

Yes. We’re an ARBOMaster approved applicator, which is run for the Arbo sealant brand.

Do you work for hotels and businesses?

Yes. Commercial and hotel work is a large part of what we do, as well as homes. Working times can be discussed when we quote.

Do you reseal kitchen worktops and sinks too?

Yes. We reseal worktop upstands, sinks and splashbacks, in a kitchen-suitable sealant, matched to the worktop where it’s on show.

Do you work for landlords and businesses?

Yes. We work for householders, landlords, letting agents, businesses and hotels in Rigside.

Should I try DIY first?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

Can I add another job to the visit?

Yes, we can. Several rooms, windows or areas can go on one quote.

For landlords and businesses

For anyone letting property in or around Rigside, several properties can go on one quote. Just tell us the addresses and what each one needs.

We work for letting agents and landlords as well as householders. Sealant work between tenants keeps a property looking cared for.

Signs you need bathroom resealing in Rigside

Black mould is behind a lot of resealing. Steamy rooms that don’t dry out keep the silicone damp for hours, and once it has grown into the bead, cleaning rarely gets it out.

If you can see any of these, it’s time to have the joints looked at:

  • Water getting behind the kitchen upstand
  • A reseal done over the top of the old bead
  • Lumpy, uneven sealant from a DIY attempt
  • Black mould in the silicone that won’t clean off

Whether the job is in Rigside itself or nearby, the right material for each joint matters as much as a neat finish.

Before you book anyone

  • Which colour the sealant will be
  • Is the old sealant removed completely?
  • What insurance they hold
  • What guarantee comes with the work

Our hiring checklist

Aftercare tips

Good habits help new joints last longer. Our tips:

  • Keep an eye on the corners, where splits start
  • Use gentle cleaners on the silicone
  • Let new sealant cure fully before it gets wet
  • Keep the fan on for a while after bathing

In a kitchen, do not let water sit along the back of the worktop. The drier the joint stays, the longer it lasts.

Small signs come before a leak: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. If you spot one, it’s time to reseal.

How it works

When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Around Rigside, distance and access matter more than parking. Let us know how to find you and how to reach the joints, and the visit is planned around that.

  1. We start by protecting the area and stripping out the old bead.
  2. Next, the joint is cleaned and any mould is treated.
  3. Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
  4. We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
  5. Finally we tidy up and explain the cure time before we leave.

Preparing for the visit

  • Let us know about earlier repairs to the joints
  • Let us know if you’ve seen damp or leaks
  • Keep pets and children clear of the area while we work

Ask for a quote

We quote each job on its own. Simply send an email to info@mrmastic.co.uk and describe the job, and pictures are welcome.

Ask for a quote

Advice

DIY sealant or a professional job?

The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.

If you’ve already had a go yourself, that is fine. We remove it and do the joint properly.

Bathroom resealing in Rigside: local notes

Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that doesn’t dry out.

In and around Rigside, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.

Rigside is about 10 miles south of Carluke, in South Lanarkshire. If you need bathroom resealing in Rigside, it’s easy to get a quote: please drop us a line at info@mrmastic.co.uk. We are based in Crawley and cover South Lanarkshire, Rigside included. Our area takes in 139 places across South Lanarkshire. Glasgow is on our list too, around 26 miles away.

Every address in ML11 is covered for bathroom resealing, from the main roads to the quietest streets. If you need bathroom resealing at a property on Douglasdale Street, Newtonhead Road and Broomfield Street or a nearby road, our applicators can take on the job. Nearby, we also carry out bathroom resealing in Douglas Water (1 mile north), Carmichael (3 miles north-east), Devonburn (4 miles north-west), Douglas (4 miles south-west) and Coalburn (4 miles west). Larger places within reach include Larkhall (12 miles north-west), Carluke (10 miles north), Lanark (5 miles north), Strathaven (12 miles north-west), Meikle Earnock (15 miles north-west) and Stonehouse (11 miles north-west).

Around Rigside

Nearby you will also find Castle Mains (1.9 miles south-west) and Douglas Heritage Museum (3.8 miles south-west).

Map of Rigside © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job