South Lanarkshire · Scotland
Fire-rated sealant in Rigside, South Lanarkshire
We cover Rigside for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.
- Unsealed gaps around fire door frames
- Ordinary sealant used where a fire-rated product was needed
- Fire seals that have cracked with movement
What we do, step by step
Once we are on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes a few hours for a handful of gaps, and longer for a whole building. Outdoor work around Rigside depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Work indoors isn’t affected.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Finally, we list where we worked and what we used, for your records.
Before we arrive
- Tell us if parking is tricky
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any water getting in
Ask for a quote
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved.
Advice
Fire rated sealant in Rigside, done properly
We often work from an action list drawn up by a fire risk assessor. Send us the list or the survey and we will quote for the fire-rated sealant work on it. We work on linear gaps, door frames and service penetrations, and common reasons people get in touch are new service routes left unsealed after building work and open joints along the top of partitions.
Work in a place like Rigside is planned ahead, journey included, so the job can fit around guests, residents or opening hours where possible.
Every job comes with a one-year guarantee, wherever you are in South Lanarkshire.
- Place
- Rigside (ML11)
- Region
- South Lanarkshire
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Also near Rigside
Also in Rigside
Rigside questions
Do you cover smaller places like Rigside?
Yes, we do. Our work covers the whole of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you do fire rated sealant in Rigside?
Yes. We work across all of Scotland, and Rigside is part of that. You can email us at info@mrmastic.co.uk and tell us what needs doing.
Do you have insurance?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Can you tell me which gaps need fire stopping?
No, we do not assess buildings. Once you have a specification or action list from your assessor or designer, we’ll quote for the sealant work on it.
Can I choose the sealant colour?
Yes. White, clear and grey are common, and other colours are available for many products, and we agree the colour with you before any work starts.
How long does fire rated sealant take?
Typically it takes a few hours for a handful of gaps, and longer for a whole building. Larger jobs naturally take longer, and we will say how long yours will take.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with our work in that time, tell us and we will put it right.
Can you seal over the old sealant?
No, it will not last. It can look neat for a few weeks, but the new layer lifts away from the old one. The old sealant has to come out completely.
What we cannot put right
We will not take on work that won’t last, so these are the limits:
- Fire doors that need new seals, closers or hardware
- Construction that does not provide fire resistance on its own
- Openings too large for sealant, which need batts, boards or another system
If in doubt, email us at info@mrmastic.co.uk and we will say what we think before booking.
Where we work in Rigside
- Service penetrations
- Flats & HMOs
- Pipe & cable gaps
- Door frames
- Linear gaps
- Plasterboard & masonry
When to call us in Rigside
Much fire stopping is hidden: in ceiling voids, service risers and behind boxing. Out of view, damage sits unnoticed until someone inspects.
The problems people generally mention when they call are:
- Cracked or shrunken fire-rated sealant
- Holes left by a change of layout
- Unsealed gaps around fire door frames
- Unsealed gaps where pipes and cables go through a wall
Whether the job is in Rigside itself or nearby, the right material for each joint matters as much as a neat finish.
Before booking anyone
- How the surfaces are prepared before sealing
- What the cure time is
- Is the old sealant removed completely?
- The length of the guarantee
Should I try it myself first?
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
How we quote for fire rated sealant
The quote reflects the job in front of us. We look at:
- The number and length of the joints
- Whether old sealant or filler has to be cut out
- The type of sealant required
- Any working-time requirements on site
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Helping us quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Roughly how big the job is
- Any access issues, like height or stairs
- The problem you’ve noticed
- The type of property
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, send an email to info@mrmastic.co.uk.
Landlords, agents and businesses in Rigside
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.
If you manage several properties in or around Rigside, several properties can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.
Aftercare tips
Aftercare is simple:
- Include hidden areas like risers in routine checks
- Include fire stopping when you schedule refits
- Flag any open gap you spot round a pipe or cable
- Tell trades working in the building that fire seals must be put back
Don’t drill through or remove a fire seal without putting it back properly. If you need new services through a sealed wall, plan the fire stopping as part of the job.
It’s easiest to seal gaps while they’re few and easy to reach. Over time, more work adds more holes and the list grows.
What fire rated sealant looks like in Rigside
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
In and around Rigside, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Rigside is about 10 miles south of Carluke, in South Lanarkshire. Our applicators cover fire rated sealant for homeowners, landlords and businesses in Rigside, as part of our work across South Lanarkshire. Our South Lanarkshire coverage runs to 139 places, Rigside among them. You can also see our page for Glasgow, roughly 26 miles from Rigside.
Postcode districts we cover here for fire rated sealant: ML11. Whether your property is on Douglasdale Street, Newtonhead Road and Broomfield Street or a nearby road, our applicators can take on the job. Nearby, we also carry out fire rated sealant in Douglas Water (1 mile north), Carmichael (3 miles north-east), Devonburn (4 miles north-west), Douglas (4 miles south-west) and Coalburn (4 miles west). Larger places within reach include Larkhall (12 miles north-west), Carluke (10 miles north), Lanark (5 miles north), Strathaven (12 miles north-west), Meikle Earnock (15 miles north-west) and Stonehouse (11 miles north-west).
Landmarks near Rigside
Nearby you will also find Castle Mains (1.9 miles south-west) and Douglas Heritage Museum (3.8 miles south-west).