South Lanarkshire · Scotland
Strathaven Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing for householders, landlords and businesses in Strathaven. Fully insured, ARBOMaster approved and guaranteed for a year.
- Cracked, shrunken or lifting silicone
- Water escaping at the shower enclosure
- Two layers of silicone, both failing
Bathroom resealing for homes and businesses in Strathaven
It is not only bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback all take splashes every day, and water that gets into the back edge of a worktop can swell the board. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. We work on sinks & splashbacks, baths and wet rooms, and common reasons people get in touch are water getting behind the kitchen upstand and cracked, shrunken or lifting silicone.
In and around a place like Strathaven, homes range from older stone-built properties to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
We stand behind the work with a one-year guarantee.
- Place
- Strathaven (ML10)
- Region
- South Lanarkshire
- Cover
- 12 months on all our work
- Quotes
- A clear price before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Different surfaces, different methods
Shower trays & enclosures
A tray that rocks will split any sealant. We check for movement before we reseal, and if the tray needs refixing, we will say so.
Baths
Acrylic baths flex the most, and even steel and cast iron baths settle slightly when full. Loading the bath with water before sealing allows for it.
More services for Strathaven
What affects the quote in Strathaven
There’s no set price list. The quote depends on:
- The type of sealant required
- Any working-time requirements on site
- The amount of work
- Whether there’s mould to deal with
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference.
What we need to know
You do not need to know the technical terms. It helps if you can tell us:
- The problem you’ve noticed
- How many joints, rooms or windows are involved
- Whether it has been sealed before
- The type of property
There’s no standard price list, because every job is different. Instead, we give you a clear price for your job. To get started, email us at info@mrmastic.co.uk.
When something else is needed
It helps to know what we can’t do too:
- Loose or hollow tiles, or failed tanking behind them
- Water getting in through the grout rather than the sealant
- A cracked shower tray or bath (that needs repair or replacement)
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think before you book.
Joints and surfaces we work on
- Kitchen worktops & upstands
- Baths
- Sinks & splashbacks
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
Bathrooms and kitchens in Strathaven
Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out.
In the older streets around East Parish Church, older homes can move a little, which is hard on rigid grout and tired sealant.
Strathaven is about 6 miles south of Hamilton, in South Lanarkshire. We carry out bathroom resealing for homes and businesses in Strathaven and the surrounding area. Our South Lanarkshire coverage runs to 139 places, Strathaven among them. Our Glasgow page covers work nearby.
We cover every part of ML10 for bathroom resealing and the streets around it. We cover properties on Main Street, Station Road and Loudon Street and the roads around them. If you are just outside Strathaven, we cover Sandford (2 miles south-east), Glassford (2 miles north-east), Chapelton (3 miles north-west), Stonehouse (3 miles east) and Quarter (4 miles north). Further out, we also cover East Kilbride (7 miles north-west), Hamilton (6 miles north), Cambuslang (10 miles north), Uddingston (10 miles north), Blantyre (8 miles north) and Larkhall (5 miles north-east). Strathaven is one of the larger places we cover in South Lanarkshire.
What’s near Strathaven
Well-known places in the area include Strathaven Castle (under half a mile south) and Stonehouse Hospital (3 miles east).
Common questions in Strathaven
Will you come out to Strathaven?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Is Strathaven in your area for bathroom resealing?
Yes. We work across all of Scotland, and Strathaven is part of that. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we’ll give you a clear quote.
How long does the new silicone need before I use the shower?
We give you the cure time before we leave, and it’s usually around 24 hours. Using it sooner can damage the bead.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
How long does it take to reseal a bath or shower?
One bath or shower is around two hours’ work, old sealant removal included. A whole bathroom plus the kitchen may take most of the day.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
My sealant has gone black. Can you sort it?
Yes, by replacing the sealant. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Airing the room well helps stop it returning.
Where is Mr Mastic based?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
How the visit works
Most of a good job is in the preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Somewhere like Strathaven may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We protect the area and cut out all of the old sealant, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We clear away and tell you when it can get wet, normally after around 24 hours.
Preparing for the visit
- Keep children and pets away from the work area
- Let us know about parking restrictions
- Let us know about earlier repairs to the joints
Getting a quote
Need a quote? Please email us at info@mrmastic.co.uk with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Related advice
Should I try it myself first?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Why it’s worth doing now in Strathaven
Tired sealant isn’t a reason to replace a bath or shower. Replacing the joint is normally all it takes, as long as the fittings themselves are sound. If we find a deeper problem, you will hear it from us. Around Strathaven, water from a failed joint in an older stone home can soak into timber and plaster.
The cost reflects the work involved, not guesswork. That’s why we ask a few questions first and give you a clear price before we start.
What you get with us
- Rated 4.9 stars on Google
- An ARBOMaster approved applicator
- Experience in homes, commercial sites and hotels
- One-year guarantee on every job
See our cost guide or what customers say.
What we are called out for in Strathaven
Silicone needs a clean, dry surface without any grease to stick to. Traces of soap, bath oil and old sealant stop it gripping, and a joint that looked fine soon begins to come away.
Most people get in touch after spotting one of these:
- A joint torn by a bath that flexes
- Lumpy, uneven sealant from a DIY attempt
- Sealant that has split, shrunk or peeled away
- Water getting behind the bath panel
Managing a site like Strathaven Academy? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What your quote should include
- How long the guarantee is
- How hidden problems are handled
- Is the old sealant removed completely?
- Is VAT in the price?