Kent · England
Bathroom Resealing in Poundsbridge
Specialist bathroom resealing for Poundsbridge: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Splits where the tray meets the wall
- Leaks into the floor or ceiling below
- Mouldy sealant that has gone black
Bathroom resealing in Poundsbridge, done properly
Resealing is a small job that makes a big difference. Mouldy silicone makes even a new bathroom look neglected, and a clean white or clear joint fixes it quickly. It also seals the gaps that let water behind the bath. Typical jobs include failed sealant on the screen profile and lumpy, uneven sealant from a DIY attempt, on shower trays & enclosures, basins & vanity units and wet rooms.
In a village or hamlet like Poundsbridge, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Whatever the size of the job, it’s backed by our 12-month guarantee.
- Where
- Poundsbridge (TN11)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
How we quote for bathroom resealing
We don’t publish a price list. The quote depends on:
- The number of rooms or windows
- The number and length of the joints
- How much old sealant there is and how hard it is to remove
- Working hours on commercial sites
The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You’ll have a clear quote before any work starts.
Asking for a quote
Photos by email are helpful but not essential. Try to tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- The rough size of the job
- Access, such as stairs, a lift or height
- A few pictures by email, if you can
Getting a quote is simple: let us know what needs doing and where. Photos by email help us understand the job.
How it works
You don’t need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the work takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen in most cases. Somewhere as small as Poundsbridge, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, usually around 24 hours.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Let us know about earlier repairs to the joints
- Tell us about access, such as stairs, a lift or high-level joints
Get a quote
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved.
Related advice
Questions from Poundsbridge
Do you work for landlords with property near Ashurst Kent station?
Yes. We work for letting agents and landlords as well as homeowners, and several properties can be quoted together. Just ring 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear quote.
Do you cover smaller places like Poundsbridge?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
When can I use the bath or shower again?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Keep water off it for around 24 hours, or as long as we advise for that product.
Do you do kitchens as well as bathrooms?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then a colour-matched bead is laid.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before resealing.
Are you fully insured?
Yes. We’re fully insured.
My sealant has gone black. Can you sort it?
Yes. Once mould has grown into the silicone, it usually cannot be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Where are you based?
Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Poundsbridge homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Letting a property close to Ashurst Kent station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. Schools such as Speldhurst Church of England Voluntary Aided Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. For an older house near a landmark such as All Souls Chapel, older homes can move a little, which is hard on rigid grout and tired sealant.
Poundsbridge is about 3 miles north-west of Royal Tunbridge Wells, in Kent. We provide bathroom resealing to homes and businesses in Poundsbridge, as part of our work across Kent. We cover 922 towns and villages across Kent, large and small. Crawley is on our list too, around 17 miles away.
Every address in TN11 is within our area for bathroom resealing, from the main roads to the quietest streets. If you need bathroom resealing at a property on Penshurst Road and Poundsbridge Hill or anywhere close by, our applicators can take on the job. Nearby, we also carry out bathroom resealing in Bullingstone (1 mile south-east), Speldhurst (1 mile east), Printstile (1 mile north-east), Stockland Green (1 mile east) and Langton Green (2 miles south). We also work in nearby towns such as Sevenoaks (9 miles north), Royal Tunbridge Wells (3 miles south-east), Tonbridge (5 miles north-east), Kings Hill (12 miles north-east), Paddock Wood (8 miles east) and Edenbridge (7 miles north-west).
Around Poundsbridge
Around Poundsbridge, our work takes us to homes and buildings near Bennett Memorial Diocesan School and The George And Dragon pub. The closest station to Poundsbridge is Ashurst Kent station, about 2.8 miles south-west of the centre. Nearby you will also find Chiddingstone Castle (3.4 miles north-west) and Kent and Sussex Hospital (2.8 miles south-east). For a walk, there’s Broadwater Warren RSPB Reserve and Barden Lake.
Why deal with it now?
Leaving a split or mouldy bead only stores up trouble. Once water is behind the bath, it can reach floorboards, panels and the ceiling underneath, turning a small job into a building repair. Where a wall is exposed, as many are in small places like Poundsbridge, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote and we’ll talk you through it.
Why Poundsbridge customers choose us
- Old sealant always removed completely
- Experience in homes, commercial sites and hotels
- 180+ five-star Google reviews
- Trusted Arbo and Everbuild sealants
Take a look at our cost guide or customer reviews.
DIY versus a professional finish
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Landlord and commercial work in Poundsbridge
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can be quoted together.
Looking after it afterwards
After the cure time, these simple habits help:
- Open a window or run the fan so the room dries
- Wipe the sealant dry after showering
- Clean with a mild bathroom cleaner and a soft cloth
- Let new sealant cure fully before it gets wet
Treat the new bead gently when you clean: a mild bathroom cleaner and a soft cloth is enough. Avoid scouring pads and anything sharp, because a damaged bead gives mould a foothold.
Watch for the early signs: lifting ends, gaps, dark shadows under the bead or a stain downstairs. If you spot one, it’s time to reseal.
What sealant work can’t fix
It helps to know what we cannot do:
- Water coming from the plumbing rather than the joint
- Damage behind the tiles that needs a tiler
- Cracked or missing grout between tiles (that’s regrouting)
Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly.
What we seal
- Basins & vanity units
- Kitchen worktops & upstands
- Wet rooms
- Sinks & splashbacks
- Shower trays & enclosures
- Baths