Highland · Scotland
Bathroom & kitchen resealing in Portree, Highland
Bath, shower, basin, wet room, worktop and sink resealing in Portree, with a one-year guarantee on every job. Call for a quick quote.
- Cracked, shrunken or lifting silicone
- A joint torn by a bath that flexes
- Leaks into the floor or ceiling below
How it works
We bring everything the job needs with us, so there’s nothing for you to buy. Once we’ve agreed what’s being done, the area is protected and the work begins. Most jobs take a couple of hours for a single bath or shower. Around Portree, distance and access matter more than parking. Tell us how to find the property and how to reach the work.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- Next, the joint is cleaned and any mould is treated.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We tidy up and give you the cure time, normally around 24 hours.
How to prepare
- Keep children and pets away from the work area
- Let us know if you’ve seen damp or leaks
- Mention any tricky access
How to get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. When it suits you, send an email to info@mrmastic.co.uk.
Advice
Bathroom resealing in Portree
A bead that has gone black, split or come away is worth sorting before it lets water through. A photo of the joints helps when you drop us a line at info@mrmastic.co.uk, and we’ll give you a clear price before any work starts. We work on shower trays & enclosures, sinks & splashbacks and baths, and people most often call us about splits where the tray meets the wall and shrunken sealant along the back of a worktop.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Where a building moves, cracked grout and split sealant are usually the first signs.
We stand behind the work with a one-year guarantee, so you are covered after we’ve gone.
- Place
- Portree (IV51)
- Wider area
- Highland
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
When to call us in Portree
Sealant laid on a damp, dusty or greasy joint never bonds properly. Traces of soap, bath oil and old sealant stop it gripping, and a joint that looked fine soon begins to come away.
These are the problems we are asked about most:
- A reseal done over the top of the old bead
- A messy, uneven bead from a previous reseal
- Water getting behind the bath panel
- Mouldy sealant that has gone black
For an older house near a landmark such as St Columba's Episcopal Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
What to look for in a quote
- Whether all the old sealant comes out first
- How the surfaces are prepared before sealing
- Whether you can choose the colour
- How long the guarantee is
What bathroom resealing looks like in Portree
Portree is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.
Managing a site like Portree High School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Portree (Gaelic: Port Rìgh) is in Highland. For bathroom resealing in and around Portree, please send an email to info@mrmastic.co.uk for a quick quote. We’re based in Crawley and cover Highland, Portree included. Portree is one of 253 towns and villages in Highland we cover.
Here we cover the IV51 postcode area for bathroom resealing. Bathroom resealing is available to properties on Somerled Square, Viewfield Square and Ionad Mharsco and the roads around them. Neighbouring places we cover for bathroom resealing include An t-Ollach (4 miles south-east), Inverarish (7 miles south-east), Coillore (9 miles south-west), Clachamish (9 miles north-west) and Carbost (10 miles south-west). For island and remote addresses, a little more planning is needed.
Near you in Portree
In Portree, that means homes and buildings near Cuillin Hills Hotel and Bun-sgoil Ghàidhlig Phort Righ. A little further out are Portree Hospital (under half a mile south). Open spaces near Portree include Loch Fada.
Landlords, agents and businesses in Portree
If you manage several properties in or around Portree, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and photos by email help.
Housing providers, facilities teams and property managers book us too in Portree and across Highland. We can quote a run of properties together, and we are fully insured for the work.
Why it’s worth doing now in Portree
Leaving a split or mouldy bead only stores up trouble. Water that gets behind a bath soaks into the floor, the panel and sometimes the ceiling below, and that is a far bigger job than a reseal. Around Portree, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Ask us for a quote and we will explain what it covers.
Why Portree clients choose us
- We’re fully insured
- 4.9 on Google from 180+ five-star reviews
- ARBOMaster approved applicator
- Colour agreed with you before we start
Read what affects the cost or what customers say.
Honest limits
Before booking, it’s worth knowing the limits too:
- Movement from a bath with loose feet or no proper support
- Failed grout lines across the wall
- A leaking waste, trap or valve
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think before booking.
Where we work in Portree
- Basins & vanity units
- Wet rooms
- Kitchen worktops & upstands
- Baths
- Shower trays & enclosures
- Sinks & splashbacks
What the job involves on each surface
Basins & vanity units
On a basin, neatness shows: so we keep the line tidy and even, in white, clear or a colour to suit.
Sinks & splashbacks
Water getting under the rim of an inset sink can soak the worktop. Where the sealant around the visible edge has failed, we renew it.
Aftercare tips
Simple care keeps the joints in good condition. We recommend:
- Keep an eye on the corners, where splits start
- Keep bottles off the sealant line
- Clean with a mild bathroom cleaner and a soft cloth
- Squeegee the walls and tray after use
Keep water off the new bead until it has cured, following the cure time we give you. Once it’s cured, wiping it down after use keeps it looking new.
Small signs come before a leak: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. Any of these means the joint needs attention.
FAQs for Portree
Will you come out to Portree?
Yes. Portree is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Is Portree in your area for bathroom resealing?
Yes. We work across all of Scotland, and Portree is part of that. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we’ll send you a clear quote.
Is it messy?
No. We protect the surfaces around the joints, and we tidy up before we go.
Which products do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status, and we are fully insured.
Do you reseal kitchen worktops and sinks too?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then a colour-matched bead is laid.
How long does it take to reseal a bath or shower?
Allow a morning or an afternoon for most single baths and showers. We’ll confirm how long your job needs when we quote.
Does someone need to be in?
That depends on where the joints are. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.