Argyll and Bute · Scotland
Bathroom & kitchen resealing in Portnahaven, Argyll and Bute
Bathroom resealing across Portnahaven and nearby, with old sealant always removed completely and a 12-month guarantee.
- A reseal done over the top of the old bead
- Smears of silicone across the tiles
- A bead that has pulled away from the tiles
Bathroom resealing in Portnahaven
Before a bath is sealed, it’s filled with water. A full bath sits slightly lower than an empty one, so the bead is not stretched the first time someone gets in. Quick jobs often leave it out, and it makes a real difference. Common call-outs are for a bead that has pulled away from the tiles and a joint torn by a bath that flexes, across wet rooms, basins & vanity units and baths.
A bathroom in a place like Portnahaven gets the same daily wear as one in a city flat. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
All our work comes with our 12-month guarantee.
- Location
- Portnahaven (PA47)
- Region
- Argyll and Bute
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
How it works
A visit follows a simple pattern: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and tidy away. It usually takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Somewhere like Portnahaven may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- Protection goes down around the bath, shower or worktop.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Before we arrive
- Try not to wet indoor joints just before the visit
- Move anything stored near the joints
- Let us know if you’ve seen damp or leaks
Get a quote
Need a quote? Please email us at info@mrmastic.co.uk and tell us about the job. We will explain what we’d do and give you a clear quote before work begins.
Advice
Keeping the joints in good condition
A little care helps the new joints last. We recommend:
- Check the joints every few months for splits or lifting
- Squeegee the walls and tray after use
- Open a window or run the fan so the room dries
- Keep bottles off the sealant line
Keep bottles and razors off the sealant line, as they hold water against it. Squeegeeing the walls and tray after use helps the joint dry.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Early resealing closes the gap before damage is done.
Towns and villages near Portnahaven
Also in Portnahaven
Surface by surface
Baths
Acrylic baths flex the most, while steel and cast iron baths move less but still settle when full. Filling the bath first allows for that movement.
Shower trays & enclosures
Shower trays are sealed to the wall, and enclosures are sealed to the tray and tiles. Both get soaked every time the shower runs, so both are resealed with anti-fungal sanitary silicone.
Bathroom resealing around Portnahaven
Portnahaven is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
In and around Portnahaven, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Portnahaven (Gaelic: Port na h-Abhainne) is in Argyll and Bute. Anywhere in PA47, our applicators can take on bathroom resealing. Across Argyll and Bute, we cover 118 places, Portnahaven among them.
We cover every part of PA47 for bathroom resealing and the streets around it. Whether your property is on High Street, Shore Street and Church Street or anywhere close by, our applicators can take on the job. If you are just outside Portnahaven, we cover Bun Othan (1 mile south), Port Charlotte (6 miles north-east), Bowmore (10 miles north-east), Imeraval (12 miles east) and Port Ellen (13 miles east). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
What’s near Portnahaven
For a walk, there’s Beinn Tart a' Mhill.
Why act early in Portnahaven
A quick bead over the top of the old one might look better for a while, but it cannot stick to what’s underneath. Water creeps under it and mould follows, and the next reseal means two layers to cut out. In a place like Portnahaven, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
Why book with us
- You choose the colour before work begins
- Homes, businesses and hotels
- We leave the area clean and tidy
- Any old sealant cut out fully, not covered over
See what affects the cost and customer reviews.
Common questions in Portnahaven
Can you do bathroom resealing in Portnahaven?
Yes. We work across all of Scotland, and Portnahaven is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job.
Will you come out to Portnahaven?
Yes, we do. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can mouldy silicone be sorted out?
Yes. Mould inside the bead rarely cleans out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Do you remove the old sealant?
Yes. Sealing over old sealant is the main reason resealing fails early, so we never do it.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference.
Can I choose the colour of the sealant?
There’s a choice: white, clear and colours to suit tiles and worktops. We’ll talk it through when we quote.
Is it messy?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Can you just seal over the old silicone?
No. A bead laid over old silicone soon starts to come away, because silicone doesn’t bond to silicone. We remove the old bead completely before resealing.
Work for landlords, hotels and businesses
Letting agents and landlords in Portnahaven can book us as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
When something else is needed
To be straight with you, there are a few things sealant won’t fix:
- A leaking waste, trap or valve
- A cracked shower tray or bath (that needs repair or replacement)
- A tray that rocks until it’s re-bedded
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly before you book.
Surfaces we seal
- Basins & vanity units
- Sinks & splashbacks
- Wet rooms
- Baths
- Shower trays & enclosures
- Kitchen worktops & upstands
What we’re called out for in Portnahaven
Mould is the reason many people want their sealant replaced. Steamy rooms that do not dry out give mould all the damp it needs, and once it has grown into the bead, cleaning rarely gets it out.
The most common problems we see are:
- Leaks into the floor or ceiling below
- Two layers of silicone, both failing
- Black mould in the silicone that won’t clean off
- Leaking joints on a shower screen
For an older house near a landmark such as Portnahaven Church, older homes can move a little, which is hard on rigid grout and tired sealant.
Before you book anyone
- What happens if the job turns out different
- What product goes in the joint
- How the joint is cleaned and prepared
- How long the guarantee is