Argyll and Bute · Scotland
Bathroom & kitchen resealing in Ardbeg, Argyll and Bute
Professional bathroom resealing in and around Ardbeg, with every bit of old sealant taken out first and a 12-month guarantee.
- Gaps where the bath or tray has moved
- A messy, uneven bead from a previous reseal
- Failed sealant on the screen profile
Can I do it myself?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so just mention it when you contact us.
About our bathroom resealing in Ardbeg
A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We work on basins & vanity units, shower trays & enclosures and wet rooms, and people most often call us about a joint torn by a bath that flexes and water getting behind the bath panel.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
The work is covered for a year after we finish. If anything isn’t right with it, email us at info@mrmastic.co.uk.
- Location
- Ardbeg (PA42)
- Region
- Argyll and Bute
- Cover
- A year, on every job
- Quote
- A clear price before we start
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Looking after it afterwards
So the new joints stay in good condition:
- Dry the bead with a towel now and then
- Open a window or run the fan so the room dries
- Check the joints every few months for splits or lifting
- Wait for the cure time we give you
Have a look at the joints every few months. Small splits and lifting ends are easy to catch early, and if anything looks wrong, just send an email to info@mrmastic.co.uk.
Don’t wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and renewing it as soon as it fails protects everything around it.
Leave it or put it right?
Mould removers can fade the surface of a stained bead, but where mould is inside the silicone it usually comes back. The lasting answer is to remove the bead and start again. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we’ll explain what it covers.
Why book with us
- Tidy, careful work
- Experience in homes, commercial sites and hotels
- 180+ five-star Google reviews
- Arbo and Everbuild products
See our cost guide or our reviews.
Honest limits
We will always be straight with you, so here’s what new sealant won’t do:
- Failed grout lines across the wall
- A cracked shower tray or bath (that needs repair or replacement)
- A tray that rocks until it’s re-bedded
If you are not sure, just drop us a line at info@mrmastic.co.uk and we will give you a straight answer.
Surfaces we seal
- Baths
- Kitchen worktops & upstands
- Wet rooms
- Basins & vanity units
- Sinks & splashbacks
- Shower trays & enclosures
Work for landlords, hotels and businesses
Hotels need rooms back in use, so we plan the work room by room. We have worked in hotels as well as homes and businesses.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Nearby places to Ardbeg
Other services in Ardbeg
What bathroom resealing looks like in Ardbeg
Ardbeg is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
In and around Ardbeg, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint. For jobs in and around Ardbeg, choosing the right material for each joint is as important as a tidy finish.
Ardbeg is in Argyll and Bute. Jobs in Ardbeg get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Ardbeg is one of 118 towns and villages in Argyll and Bute we cover for bathroom resealing. There’s also a page for Glasgow, about 73 miles away.
Postcode districts we cover here for bathroom resealing: PA42. If you’re just outside Ardbeg, we cover Port Ellen (3 miles west), Imeraval (4 miles west), Bowmore (11 miles north-west), Port Charlotte (13 miles north-west) and Keills (14 miles north). Remote and island addresses need a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.
Near you in Ardbeg
Other landmarks nearby include Dunyvaig Castle (0.8 miles south-west). Open spaces near Ardbeg include Lochan Sholum.
How it works
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes half a day or less for one room, longer when the kitchen is included, depending on how much there is to do. For a place like Ardbeg, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We protect the area and cut out all of the old sealant, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We clear away and tell you when it can get wet, generally after around 24 hours.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- Plan for the work area to be out of bounds to pets and children
- For indoor joints, keep the area dry beforehand if you can
Get a quote
Getting a quote is simple: let us know the job and the location. Photos by email help us understand the job.
Advice
FAQs for Ardbeg
Do you cover Ardbeg for bathroom resealing?
Yes, Ardbeg is within the area we cover. Our work covers the whole of Scotland. You can drop us a line at info@mrmastic.co.uk and let us know what needs doing.
Will you come out to Ardbeg?
Yes, we do. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do the sealants smell?
There can be a smell while the sealant cures. Ventilation helps.
Where are you based?
We are based in Crawley, and we cover South East England, London and all of Scotland.
Do you take out the old sealant first?
Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.
Will you leave a mess?
Tidy work is part of the job. We protect what’s around the joints.
Do you guarantee your resealing?
Yes. We give a 12-month guarantee on every job, and we are ARBOMaster approved applicators.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status.
How the job changes by surface
Sinks & splashbacks
Next to the sink, the sealant has to cope with constant water, including a food-safe sealant where that’s needed. The joint is laid neatly so it’s easy to wipe.
Kitchen worktops & upstands
Upstands and back edges are cut out, cleaned of grease and resealed, because cooking grease stops sealant bonding. The extra cleaning is what makes the bead last.