Argyll and Bute · Scotland
Bathroom Resealing in Bun Othan
Our applicators work in Bun Othan on bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly.
- Splits where the tray meets the wall
- A reseal done over the top of the old bead
- Water escaping at the shower enclosure
FAQs for Bun Othan
Can you do bathroom resealing in Bun Othan?
Yes, Bun Othan is within the area we cover. We work across all of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Will you come out to Bun Othan?
Yes, Bun Othan is covered. We work across all of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is the work guaranteed?
Yes. All our work comes with a 12-month guarantee.
Is it messy?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
Do I have to be there?
That depends on where the joints are. Inside work needs someone to give us access, and for outside work we’ll agree access with you when we book.
How do I get a quote for bathroom resealing in Bun Othan?
Every job is different, so each one gets its own quote. To get one, send an email to info@mrmastic.co.uk with a short description of the job.
My sealant has gone black. Can you sort it?
Yes. Once mould has grown into the silicone, it generally cannot be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Do you take out the old sealant first?
Yes, every time. New sealant will not bond properly to old, so any old material comes out before anything new goes in.
Bathroom resealing for homes and businesses in Bun Othan
Kitchens need the same care as bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback get wet every single day, and water behind a laminate worktop can make it swell. We reseal them with a kitchen-suitable silicone, matched to the worktop where it’s on show. Common call-outs are for splits where the tray meets the wall and gaps between the worktop and the wall, across shower trays & enclosures, baths and basins & vanity units.
For a place like Bun Othan, the job is the same as anywhere: old material out, joints cleaned and dried, and a fresh, even finish. The journey and access are simply planned in advance.
There’s a 12-month guarantee on every job, large or small.
- Location
- Bun Othan (PA47)
- Region
- Argyll and Bute
- Cover
- 12 months on all our work
- Quote
- A clear price before we start
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Nearby places to Bun Othan
Other services in Bun Othan
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
What affects the cost of bathroom resealing
Jobs vary more than people expect. What affects the quote:
- Working hours on commercial sites
- The amount of work
- Whether the work is at height
- Whether there’s mould to deal with
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
What we need to know
When you contact us, these details help:
- If it’s domestic, commercial or a hotel
- A few photos by email, if you can
- The problem you’ve noticed
- How we’d reach the joints
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
What we’re called out for in Bun Othan
Not every tube in the shop is meant for a shower. Acrylic caulk and general-purpose sealants aren’t designed for a joint that’s wet every day, so they crack, discolour or grow mould quickly. Wet areas call for a sanitary silicone with an anti-fungal additive.
Look out for any of the following:
- A joint torn by a bath that flexes
- Water getting behind the kitchen upstand
- Cracked, shrunken or lifting silicone
- Leaking joints on a shower screen
Around Bun Othan, as everywhere, bathroom resealing is only as good as the preparation behind it.
Comparing quotes
- What happens if the job turns out different
- Who does the work, and how experienced they are
- Whether you can choose the colour
- Is the old sealant removed completely?
How the visit works
On the day, there’s very little for you to do. Show us the job and we will take it from there. The work itself takes a morning or an afternoon for most single baths and showers. In smaller Scottish places, parking is usually less of an issue than access and distance. Let us know how to find you and how to reach the joints.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- The bead is tooled smooth and you are told the cure time, generally around 24 hours.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Move anything stored near the joints
- Where the joints are inside, avoid wetting them before we arrive
Get a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved and give you a clear price.
Advice
How to look after the new joints
How long the joints last depends on use and care. Here’s what we suggest:
- Keep scourers and sharp tools away from the bead
- Keep an eye on the corners, where splits start
- Wait for the cure time we give you
- Keep the fan on for a while after bathing
Keep water off the new bead until it has cured, following the cure time we give you. After that, a quick wipe after showering helps keep it clean.
Worktop joints fail quietly. Splashes run behind the back edge and soak into the worktop, where it can make the board swell. Resealing before that happens protects the worktop.
Why act early in Bun Othan
Most of the work in a good reseal happens before any silicone goes on: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Skip those steps and even the best silicone fails early. Around Bun Othan, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
Combining jobs into one visit normally makes better use of the time than several visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
Why choose Mr Mastic in Bun Othan
- White, clear, grey or another colour, product permitting
- Colour picked to suit the job
- Trusted Arbo and Everbuild sealants
- Anti-fungal silicone where joints get wet
See our cost guide or what customers say.
Bathroom resealing around Bun Othan
Bun Othan is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
In the older streets around St Oran’s Chapel (Orsay), bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Bun Othan (Gaelic: Port Wemyss) is in Argyll and Bute. Every kind of property in Bun Othan can book us for bathroom resealing, old or new, large or small. Every job comes with our one-year guarantee. Our Argyll and Bute coverage runs to 118 places, and Bun Othan is one of them.
Postcode districts we cover here for bathroom resealing: PA47. Whether your property is on Main Street, Shore Street and An Cnoc or a nearby road, our applicators can take on the job. Neighbouring places we cover for bathroom resealing include Portnahaven (1 mile north), Port Charlotte (7 miles north-east), Bowmore (10 miles north-east), Imeraval (12 miles east) and Port Ellen (13 miles east). For island and remote addresses, a little more planning is needed.
Local landmarks in Bun Othan
For a walk, there’s Beinn Tart a' Mhill.
What we cannot put right
In fairness, some problems need a different trade:
- A bath or tray that moves because it isn’t properly supported
- Cracks in the tray itself rather than the joint
- Failed grout lines across the wall
If in doubt, drop us a line at info@mrmastic.co.uk and we will say what we think before you book.
Where we work in Bun Othan
- Kitchen worktops & upstands
- Shower trays & enclosures
- Wet rooms
- Sinks & splashbacks
- Basins & vanity units
- Baths