Hertfordshire · England
Bathroom Resealing in Pin Green
Bath, shower, basin, wet room, worktop and sink resealing for Pin Green, backed by a one-year guarantee. Ask us for a quote.
- Gaps between the worktop and the wall
- Cracked, shrunken or lifting silicone
- Damp behind the bath or under the tray
Bathroom resealing in Pin Green
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Pin Green. We’re ARBOMaster approved and fully insured, and the work comes with a 12-month guarantee. Common call-outs are for gaps where the bath or tray has moved and a messy, uneven bead from a previous reseal, on kitchen worktops & upstands, baths and basins & vanity units.
In and around Pin Green, older properties sit alongside newer ones. Older homes can move a little with the seasons, which is hard on tired sealant and rigid grout.
Each job carries a 12-month guarantee, large or small.
- Location
- Pin Green (SG1, SG2)
- Region
- Hertfordshire
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Pin Green homes and their sealant
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings. Stevenage, which Pin Green is part of, is one of England’s post-war new towns. With many homes dating from the post-war decades, plenty of bathrooms have been resealed or refitted more than once. Sealant laid over old sealant never bonds properly, so it all has to come out.
Schools such as Trotts Hill Primary and Nursery School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. If you live in an older home near Church of Saint Nicholas, walls and floors in older homes can move, and sealant and grout show it first.
Pin Green is about 1 mile north-west of Stevenage, in Hertfordshire. From the centre of Pin Green to the outskirts, bathroom resealing is available for homes and businesses alike. Across Hertfordshire, we cover 381 places, Pin Green among them. We also work in London, around 29 miles away.
We cover every part of SG1 and SG2 for bathroom resealing and the streets around it. Bathroom resealing is available to properties on Lines Road, Hawkes Lane and Aldock Road. Other places close to Pin Green include Stevenage (1 mile south-east), Bedwell (1 mile south), Rooks Nest (1 mile north), St Nicholas (1 mile north-east) and Chells (1 mile east). Further out, we also cover St Albans (13 miles south-west), Bishop's Stortford (15 miles east), Welwyn Garden City (8 miles south), Harpenden (10 miles south-west), Hitchin (4 miles north-west) and Hoddesdon (13 miles south-east).
Around Pin Green
In Pin Green, that means homes and buildings near The Barclay School, The Standing Order pub and The John Henry Newman School and the streets around them. The nearest railway station is Stevenage station, roughly 1.1 miles south-west. Nearby you’ll also find Wymondley Castle (2.7 miles north-west) and Lister Hospital (1.2 miles north-west). For a walk, there’s Pryor's Wood.
What happens on the day
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes two to three hours for a typical bath, depending on how much old sealant there is. Parking around Pin Green is generally easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- We cover the area around the joints we’re working on.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Preparing for the visit
- Tell us about any previous sealing or DIY attempts
- Tell us about any water getting in
- Mention any sign-in or site rules at work premises
Ask for a quote
Want a quote for bathroom resealing? Please ring 0345 464 0079 or send us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Related advice
Common problems we fix in Pin Green
Sealing over old silicone is one of the commonest mistakes we find. New silicone won’t bond to old silicone, so it peels, leaks and hides mould behind it.
Any of these means the joints need attention:
- Leaking joints on a shower screen
- A reseal done over the top of the old bead
- Black mould in the silicone that won’t clean off
- Lumpy, uneven sealant from a DIY attempt
If you let a flat or house near Stevenage station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
What your quote should include
- Whether you can choose the colour
- What the cure time is
- Whether the sealant suits the joint
- What happens if the job turns out different
Leave it or put it right?
Tired sealant is not a reason to replace a bath or shower. Replacing the joint is normally all it takes. If we find a deeper problem, you will hear it from us. In a smaller place like Pin Green, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.
Why us?
- Full insurance on every job
- 20+ years of sealant experience
- Any old sealant cut out fully, not covered over
- Approved under the ARBOMaster scheme
Read our cost guide and customer reviews.
Common questions in Pin Green
Do older homes in Pin Green need their sealant replacing?
Generally, yes, if it’s cracked, shrunk, mouldy or coming away. The key is cutting all the old sealant out, as new sealant won’t bond to it.
Do you work for landlords with property near Stevenage station?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
Do you work for hotels and businesses?
Yes. Larger jobs can be planned room by room or area by area to suit the site.
Can I add another job to the visit?
Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected, and we clear up when we are done.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we have agreed the job, you don’t need to watch us work.
Are you ARBOMaster approved?
Yes. Mr Mastic is an ARBOMaster approved applicator.
What affects the cost of bathroom resealing
The price is agreed before any work begins. It’s based on:
- Mould in or behind the old joints
- The old material and how stubborn it is
- The product the joint needs
- Access and height
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs. Ask us for a quote and we will explain what it covers.
What we need to know
Photos help, but a description is a good start. Please mention:
- Access, such as stairs, a lift or height
- Where the property is
- The type of property
- The problem you’ve noticed
For bathroom resealing in Pin Green, phone 0345 464 0079 or email us. Tell us what the problem is and where, and we will agree the price before any work begins.
Places near Pin Green
Other services in Pin Green
When it isn’t the sealant
Before booking, it’s worth knowing the limits:
- Water coming from the plumbing rather than the joint
- Tiles that have come away from the wall
- Water getting in through the grout rather than the sealant
Not sure which it is? You can call 0345 464 0079 or email us and we will tell you honestly before you book.
Joints and surfaces we work on
- Sinks & splashbacks
- Kitchen worktops & upstands
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
Aftercare tips
So the new joints stay in good condition:
- Clean with a mild bathroom cleaner and a soft cloth
- Give the silicone its full cure time
- Look for lifting corners and small gaps now and then
- Open a window or run the fan so the room dries
Clean the silicone with care: a mild bathroom cleaner and a soft cloth is enough. Avoid scouring pads and anything sharp, and a nicked bead lets mould in sooner.
A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. Resealing before that happens protects the worktop.
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.