Glasgow · Scotland
Bathroom & kitchen resealing in Nethercraigs, Glasgow
Our applicators work in Nethercraigs on bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly.
- Lumpy, uneven sealant from a DIY attempt
- Leaking joints on a shower screen
- Damp behind the bath or under the tray
About our bathroom resealing in Nethercraigs
A reseal only lasts if the joint is properly prepared. Every bit of old silicone comes out, down to the thin film left on the tiles, then the joint is cleaned, degreased and treated for mould. New silicone goes on only when the joint is fully dry. If you are dealing with splits where the tray meets the wall and a bead that has pulled away from the tiles, we can put it right, on kitchen worktops & upstands, shower trays & enclosures and baths alike.
From stone-built tenements to new flats and suburban houses, Nethercraigs is in a city with every kind of home. Generally soft Scottish water means less limescale, but steam and poor ventilation still let mould into the sealant and grout.
Every job comes with our one-year guarantee.
- Place
- Nethercraigs (G52, G53)
- Wider area
- Glasgow
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Bathroom resealing around Nethercraigs
Sandstone tenements are a big part of Glasgow’s housing, where most bathrooms sit above another flat. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out.
If you let a flat or house near Corkerhill station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. If you look after a building such as Lourdes Secondary School, we reseal washrooms and kitchens in schools and businesses as well as homes. If you live in an older home near St James' (Pollok) Parish Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Nethercraigs is about 3 miles south-west of Glasgow, in Glasgow. Every kind of property in Nethercraigs is covered for bathroom resealing, old or new, large or small. The work is guaranteed for a year. Our Glasgow coverage runs to 183 places, and Nethercraigs is one of them.
Every address in G52 and G53 is within our area for bathroom resealing. You’ll find streets such as Alcaig Road, Clunie Road and Langton Road, and we cover them all. Neighbouring places we cover for bathroom resealing include Corkerhill (1 mile south-east), Mosspark (1 mile north-east), Halfway (1 mile north), Craigton (1 mile north) and Pollok (1 mile south-west). Within a short drive, we also cover Glasgow (3 miles north-east), Hillhead (3 miles north-east), Dowanhill (3 miles north-east), Woodlands (3 miles north-east), Woodside (4 miles north-east) and North Kelvinside (4 miles north-east).
Landmarks near Nethercraigs
Around Nethercraigs, our work takes us to homes and buildings near Craigton Primary School and Bellahouston Park, among other places. There’s a railway station in Nethercraigs itself: Corkerhill station. Other landmarks nearby include Silverburn Shopping Centre (1 mile south) and Glasgow Museums Resource Centre (2.1 miles south-west).
What we cannot put right
We’d rather tell you now than do work that will not last, so these are the limits:
- Water getting in through the grout rather than the sealant
- Movement from a bath with loose feet or no proper support
- A cracked shower tray or bath (that needs repair or replacement)
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly before booking.
Joints and surfaces we work on
- Basins & vanity units
- Shower trays & enclosures
- Kitchen worktops & upstands
- Wet rooms
- Baths
- Sinks & splashbacks
What happens if it’s left?
Fresh sealant smartens a bathroom or kitchen with very little disruption, which matters if you’re letting a property or selling it. A smeared, uneven DIY bead does the opposite. Wind-driven rain gets into any failed joint on the outside of a city building, and in a tall building in Nethercraigs, damp can travel a long way before it shows.
The cost depends on how much there is to do, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts.
Why choose Mr Mastic in Nethercraigs
- We’re fully insured
- 4.9 on Google from 180+ five-star reviews
- You choose the colour before work begins
- A choice of colours where the product allows
Take a look at our cost guide or customer reviews.
Landlord and commercial work in Nethercraigs
We also work for property managers and facilities teams. We can quote a run of properties together, and we are fully insured.
We work for letting agents and landlords as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order.
Quotes for bathroom resealing in Nethercraigs
Call for a quick quote. What matters most is:
- The old material and how stubborn it is
- Which sealant suits the joint
- How easy the joints are to reach
- Mould in or behind the old joints
A failed joint rarely gets cheaper to fix by waiting. If you’re not sure whether it needs doing, send an email to info@mrmastic.co.uk and we will give you an honest view and a quote.
What we need to know
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Photos by email, if that’s easy
- Whether it has been sealed before
- What’s wrong with the joints now
- How many joints, rooms or windows are involved
Want a quote for bathroom resealing? Please drop us a line at info@mrmastic.co.uk and tell us about the job. We’ll explain what we’d do and send you a clear quote before any work starts.
FAQs for Nethercraigs
Do you work for landlords with property near Corkerhill station?
Yes, we work for landlords and agents. You can send an email to info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before any work starts.
Could a leaking bath seal in my Nethercraigs flat reach the neighbours below?
It can. Tenement floors are normally timber, and water from a failed seal can find its way down to the flat below, and then the repair involves your neighbours too. Replacing tired sealant early is the simplest way to avoid that.
What does bathroom resealing cost?
Size, access and the old material all affect the cost. Ask us for a quote and we will talk you through it.
What sealant do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
Do you guarantee your resealing?
Yes. Every job carries our 12-month guarantee, and we are fully insured.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us, and we’re fully insured.
Is white the only colour available?
White, clear and a range of colours are available. Where the joint is on show, we match it to the surface.
Can you do several jobs on one visit?
Yes. More than one area can be quoted together.
What we do, step by step
Every visit runs the same way: we look at the joints together, protect the area around them, do the work and tidy away. Most jobs take around two hours for one bath or shower, longer for a whole bathroom. Many homes in Scotland’s cities are tenement flats, reached through a shared close and up a common stair. In Nethercraigs, it helps to know the floor, the door entry arrangements and the nearest parking.
- First the area is protected and every bit of old sealant removed.
- Next, the joint is cleaned and any mould is treated.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- We clear away and tell you when it can get wet, usually after around 24 hours.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- Mention any sign-in or site rules at work premises
- Plan for the work area to be out of bounds to pets and children
Getting a quote
We don’t publish a price list, because every job is different. Instead, we give you a clear price for your job. To get started, email us at info@mrmastic.co.uk.
Related advice
DIY versus a professional finish
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Also in Nethercraigs
How to look after the new joints
Looking after new joints is easy, and it makes a real difference:
- Dry worktop joints after washing up
- Open a window or run the fan so the room dries
- Keep scourers and sharp tools away from the bead
- Keep an eye on the corners, where splits start
Keep water off the new bead until it has cured, following the cure time we give you. After that, a quick wipe after showering helps keep it clean.
Watch for the early signs: lifting ends, gaps, dark shadows under the bead or a stain downstairs. Any of these means the joint needs attention.