Kent · England
Lenham Heath Bathroom Resealing
Professional bathroom resealing in and around Lenham Heath, with every bit of old sealant taken out first and a 12-month guarantee.
- A reseal done over the top of the old bead
- Damp behind the bath or under the tray
- Water getting behind the kitchen upstand
Bathroom resealing in Lenham Heath: local notes
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as The Lenham School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. If you let a flat or house near Lenham station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Lenham Heath is about 8 miles north-west of Ashford, in Kent. Jobs in Lenham Heath get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Lenham Heath is one of 922 places in Kent where we work. There’s also a page for Chelmsford, about 38 miles away.
Jobs for bathroom resealing in ME17 is quoted and booked the same way as anywhere else. Streets in the area include Lenham Forstal Road, Crabtree Lane and Rose Lane, and we cover them all. Nearby, we also carry out bathroom resealing in Lenham Forstal (1 mile north-west), Charing Heath (1 mile south-east), Stonebridge Green (1 mile south), Leadingcross Green (2 miles north-west) and Lenham (2 miles north-west). We also work in nearby towns such as Maidstone (10 miles west), Ashford (8 miles south-east), Canterbury (15 miles east), Sittingbourne (9 miles north), Faversham (9 miles north-east) and Minster (14 miles north).
Around Lenham Heath
We work in homes and buildings around The Red Lion Inn, among other places. The nearest railway station is Lenham station, roughly 2 miles north-west. A little further out are Coldbridge Castle (2.4 miles south-west).
Bathroom resealing for homes and businesses in Lenham Heath
A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We work on baths, sinks & splashbacks and basins & vanity units, and people most often call us about lumpy, uneven sealant from a DIY attempt and failed sealant on the screen profile.
Homes around Lenham Heath are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we will put it right.
- Where
- Lenham Heath (ME17)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Quote
- A clear price before we start
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Do you need bathroom resealing in Lenham Heath?
Plenty of failed sealant has been laid over the top of older sealant. New silicone will not bond to old silicone, so it lifts, lets water in and traps mould underneath.
The problems people usually mention when they call include:
- A messy, uneven bead from a previous reseal
- Sealant that has split, shrunk or peeled away
- Two layers of silicone, both failing
- A joint torn by a bath that flexes
For an older house near a landmark such as Church of the Holy Trinity, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
What your quote should include
- What insurance they hold
- Who does the work, and how experienced they are
- Is the old sealant removed completely?
- What the quote includes, VAT included or not
Why deal with it now?
Most of the work in a good reseal happens before any silicone goes on: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Skip those steps and even the best silicone fails early. Where a wall is exposed, as many are in small places like Lenham Heath, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
What it costs depends on the size of the job, how much old material has to come out and access to the work. You will have a clear quote before any work starts, so you know where you stand.
Why us?
- An ARBOMaster approved applicator
- 180+ five-star Google reviews
- We agree the colour with you first
- Sealant colour chosen to suit
Read what affects the cost or customer reviews.
Lenham Heath questions
Do you cover Lenham Heath for bathroom resealing?
Yes. We work across London and the South East, and Lenham Heath is part of that. Just call 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear quote.
Is Lenham Heath within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Do you work for landlords and businesses?
Yes, we do. We work in homes, commercial premises and hotels.
Is white the only colour available?
You’re not limited to white: white, clear and colours to suit tiles and worktops. We will talk it through when we quote.
How long before the new sealant can get wet?
After around 24 hours in most cases. You’ll get the exact cure time before we leave.
Is there any odour?
Sometimes, a little. Any smell clears as the sealant cures, and ventilation helps.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
DIY versus a professional finish
A DIY attempt does not rule out a professional job. We cut it out and start again, so just mention it when you contact us.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
How the visit works
We keep the work tidy and contained to the area we are working on, so you can carry on as normal. Expect the work to take two to three hours for a typical bath, depending on how much old sealant there is, and we tell you how long to leave it before we go. Somewhere as small as Lenham Heath, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Before we arrive
- On commercial sites, let us know about site rules
- Move anything stored near the joints
- Let us know about earlier repairs to the joints
Ask for a quote
There’s no standard price list. Instead, we give you a clear quote for your job. To get started, ring 0345 464 0079 or send us an email.
Related advice
Aftercare tips
So the new joints stay in good condition:
- Keep the fan on for a while after bathing
- Wipe the sealant dry after showering
- Stick to a soft cloth and a mild cleaner
- Keep an eye on the corners, where splits start
In a kitchen, don’t let water sit along the back of the worktop and keep hot pans off the bead. A dry joint lasts longer.
Worktop joints fail quietly. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. Resealing before that happens protects the worktop.
Places near Lenham Heath
Other services in Lenham Heath
For landlords and businesses
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Landlords and letting agents in Lenham Heath can book us as well as homeowners. Sealant work between tenants keeps a property looking cared for before the next move-in.
When something else is needed
We will not take on work that won’t last, so here’s what sealant cannot put right:
- Cracked or missing grout between tiles (that’s regrouting)
- A tray that rocks until it’s re-bedded
- Loose or hollow tiles, or failed tanking behind them
If in doubt, ring 0345 464 0079 or email us and we’ll say what we think before booking.
Joints and surfaces we work on
- Basins & vanity units
- Kitchen worktops & upstands
- Baths
- Wet rooms
- Shower trays & enclosures
- Sinks & splashbacks