Highland · Scotland
Bathroom & kitchen resealing in Laide, Highland
Specialist bathroom resealing for Laide: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Water getting behind the kitchen upstand
- Damp behind the bath or under the tray
- Water escaping at the shower enclosure
Bathroom resealing in Laide, done properly
The secret of a lasting bead is the preparation. The old sealant is removed to the last smear, then the joint is cleaned, degreased and treated for mould. New silicone goes on only when the joint is fully dry. We are often asked to deal with smears of silicone across the tiles and damp behind the bath or under the tray, across kitchen worktops & upstands, sinks & splashbacks and wet rooms.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Where a building moves, cracked grout and split sealant are generally the first signs.
There’s a 12-month guarantee on every job, large or small.
- Place
- Laide (IV22)
- Wider area
- Highland
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Common questions in Laide
What guarantee comes with bathroom resealing in Laide?
All our work, in Laide and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
Will you come out to Laide?
Yes, Laide is covered. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we will explain our choice.
Can you reseal around my kitchen sink and worktop?
Yes. Worktops, sinks and splashbacks are all part of the job, with a sealant suited to kitchens, colour-matched where it shows.
Can landlords and businesses book you?
Yes. We work for homeowners, landlords, letting agents, businesses and hotels across Highland.
When can I use the bath or shower again?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Leave it around 24 hours before it gets wet, or follow the cure time we give you.
How long does a bath or shower reseal take?
That depends on the number of joints and the state of the old sealant. Allow a couple of hours for a typical bath or shower.
Is it messy?
Not at all. The area is protected while we work and cleaned up afterwards.
Other services in Laide
How the visit works
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The work itself takes half a day or less for one room, longer when the kitchen is included, including the tidy-up. Somewhere like Laide may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We clear away and tell you when it can get wet, normally after around 24 hours.
Preparing for the visit
- Let us know about earlier repairs to the joints
- Clear the area around the work
- Try not to wet indoor joints just before the visit
Getting a quote
Asking for a quote is easy: let us know the job and the location. Photos by email help us understand the job.
Advice
Bathroom resealing in Laide: local notes
Laide is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out.
In and around Laide, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Laide is in Highland. Homes, rented property, offices and hotels in Laide is covered for bathroom resealing, old or new, large or small. The work is guaranteed for a year. Laide is one of 253 places in Highland we cover for bathroom resealing.
Every address in IV22 is within our area for bathroom resealing, from the main roads to the quietest streets. Close by, we work in Aultbea (2 miles south-west), Àird (3 miles south-west), Inverasdale (6 miles south-west), Poolewe (7 miles south) and Gairloch (11 miles south-west). If you’re somewhere remote, a little more planning is needed, so mention it when you ask for a quote.
Landmarks near Laide
Well-known places in the area include Arctic Convoy Museum (2.3 miles south-west). For a walk, there’s Loch an t-Slagain.
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Common problems we fix in Laide
Plenty of failed sealant has been laid over the top of older sealant. New silicone won’t bond to old silicone, so it lifts, lets water in and traps mould underneath.
The problems people usually mention when they call are:
- Leaking joints on a shower screen
- Black mould in the silicone that won’t clean off
- Smears of silicone across the tiles
- Leaks into the floor or ceiling below
For jobs in and around Laide, choosing the right material for each joint is as important as a tidy finish.
What your quote should include
- How long the guarantee is
- Whether VAT is included
- Who does the work, and how experienced they are
- How the colour is chosen
Why it’s worth doing now in Laide
A failed joint gets more costly to put right the longer it’s left. Once water is behind the bath, it can reach floorboards, panels and the ceiling underneath, and that’s a far bigger job than a reseal. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
The cost depends on how much there is to do, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts, so you know where you stand.
Why book with us
- A sealant colour to suit the surroundings
- Colour agreed with you before we start
- Homes, businesses and hotels
- Any old sealant cut out fully, not covered over
See our cost guide and customer reviews.
What affects the cost of bathroom resealing
We do not publish a price list, because no two jobs are the same. The quote depends on:
- Which sealant suits the joint
- Whether old sealant or filler has to be cut out
- How many rooms, windows or areas are involved
- Any working-time requirements on site
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
What to tell us for a quote
To make quoting easier, please include:
- What the problem is, such as mould, gaps, leaks or cracking
- Photos by email, if that is easy
- The type of property
- Any previous sealing or DIY work
We quote each job on its own, so the first step is telling us about yours. Just send an email to info@mrmastic.co.uk with the details and send photos if you have them.
For landlords and businesses
Letting agents and landlords in Laide can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for.
For anyone letting property in or around Laide, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and photos by email help.
How to look after the new joints
Looking after new joints is easy:
- Look for lifting corners and small gaps now and then
- Never pick at the silicone with a blade
- Let new sealant cure fully before it gets wet
- Do not leave water standing on kitchen joints
Don’t stand bottles along the bead, as they hold water against it. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
Mould that starts as a few spots spreads through the bead. When it has grown right through, it rarely cleans out, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.