Kent · England
Bathroom Resealing in Kit's Coty
Bathroom resealing in Kit's Coty from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Leaking joints on a shower screen
- Mouldy sealant that has gone black
- A reseal done over the top of the old bead
When something else is needed
New sealant can’t fix everything, and we’d rather say so up front. Sealant won’t put right:
- A bath or tray that moves because it is not properly supported
- Water coming from the plumbing rather than the joint
- A cracked shower tray or bath (that needs repair or replacement)
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly before you book.
What we seal
- Kitchen worktops & upstands
- Baths
- Wet rooms
- Shower trays & enclosures
- Sinks & splashbacks
- Basins & vanity units
About our bathroom resealing in Kit's Coty
A reseal only lasts if the joint is properly prepared. Every bit of old silicone comes out, down to the thin film left on the tiles, then the joint is cleaned, degreased and treated for mould. New silicone goes on only when the joint is fully dry. We are often asked to deal with black spots spreading through the bead and shrunken sealant along the back of a worktop, on sinks & splashbacks, baths and wet rooms.
Somewhere as small as Kit's Coty, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
The work is covered for a year after we finish. If anything is not right with it, call 0345 464 0079 or drop us an email.
- Place
- Kit's Coty (ME20)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear price before work begins
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Bathroom resealing in Kit's Coty: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
For an older house near a landmark such as St Alban's Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them. For landlords with property near Aylesford station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Kit's Coty is about 3 miles south-west of Chatham, in Kent. If you need bathroom resealing in Kit's Coty, please call 0345 464 0079 or drop us an email for a quick quote. We are based in Crawley and cover Kent, Kit's Coty included. 922 places in Kent are on our list, large and small. There’s also a page for London, about 29 miles away.
We work across the ME20 postcode area for bathroom resealing and the streets around it. Bathroom resealing is available to properties on Queenswood Road, Russell Road and Beresford Road. We also cover Blue Bell Hill (1 mile north), Walderslade (1 mile north-east), Lordswood (2 miles north-east), Boxley (2 miles south-east) and Lidsing (3 miles east). Further out, we also cover Maidstone (4 miles south), Sittingbourne (10 miles east), Dartford (15 miles north-west), Sevenoaks (14 miles west), Gravesend (9 miles north-west) and Tonbridge (13 miles south-west).
Landmarks near Kit's Coty
In Kit's Coty, that means homes and buildings near Greenacre Academy, Lower Bell pub and Westfield Wood. The closest station to Kit's Coty is Aylesford station, about 2.3 miles south-west of the centre. Nearby you will also find Allington Castle (2.1 miles south) and KIMS hospital (3.4 miles south-east). Open spaces near Kit's Coty include Blue Bell Hill and Burham Down.
Landlords, agents and businesses in Kit's Coty
If you manage several properties in or around Kit's Coty, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
How the visit works
Before we leave, we go over the finished joints with you. The visit itself generally takes two to three hours for a typical bath, depending on how much old sealant there is, depending on how much there is to do. Somewhere as small as Kit's Coty, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We protect the area and cut out all of the old sealant.
- We clean and degrease the joint and treat any mould.
- We let it dry fully and fill the bath with water before sealing.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We clear away and tell you when it can get wet, normally after around 24 hours.
Preparing for the visit
- Move anything stored near the joints
- Where the joints are inside, avoid wetting them before we arrive
- Keep pets and children clear of the area while we work
Getting a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we will take it from there.
Related advice
Also near Kit's Coty
Also in Kit's Coty
Quotes for bathroom resealing in Kit's Coty
Every job gets its own quote. This is what makes a difference:
- The number and length of the joints
- Which sealant suits the joint
- Whether old sealant or filler has to be cut out
- How many rooms, windows or areas are involved
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you’re not sure whether it needs doing, call 0345 464 0079 or drop us an email for an honest opinion and a quote.
Helping us quote
To make quoting easier, let us know:
- How we’d reach the joints
- Whether it has been sealed before
- A few pictures by email, if you can
- What’s wrong with the joints now
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, call 0345 464 0079 or email us.
Surface by surface
Kitchen worktops & upstands
Kitchen joints need more degreasing than bathroom ones, since cooking leaves a film that stops silicone sticking. The extra cleaning is what makes the bead last.
Sinks & splashbacks
Around the sink, we use a product suited to kitchens, including a food-safe sealant where that’s needed. The joint is laid neatly so it’s easy to wipe.
Questions from Kit's Coty
Is Kit's Coty in your area for bathroom resealing?
Yes. We work across London and the South East, and Kit's Coty is part of that. Just ring 0345 464 0079 or drop us an email with a few details of the job.
Do you work for landlords with property near Aylesford station?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or email us with the address and what needs doing, and we will send you a clear quote.
Does the resealing come with a guarantee?
Yes. We give a 12-month guarantee on every job, and we’re fully insured.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints.
Is it OK to put new sealant on top of the old bead?
No. New silicone won’t bond to old silicone, so it lifts and traps water and mould underneath. We always take the old sealant out completely.
Should I try DIY first?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
What do you need from me for a quote?
Only a few details: the address or postcode, what’s wrong and any access issues. Then ring 0345 464 0079 or email us.
Are you an approved applicator?
Yes. We’re an ARBOMaster approved applicator.
Common problems we fix in Kit's Coty
Baths and trays move. An acrylic bath flexes under load, while a poorly supported tray can shift underfoot. That movement works at the bead until it splits or peels away.
Look out for any of the following:
- Splits where the tray meets the wall
- A bead that has pulled away from the tiles
- Two layers of silicone, both failing
- A messy, uneven bead from a previous reseal
If you look after a building such as Tunbury Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Questions to ask before booking
- How the joint is cleaned and prepared
- Which sealant they’ll use, and why
- Are they insured?
- Who does the work, and how experienced they are
Leave it or put it right?
Most of the work in a good reseal happens before any silicone goes on: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Without that preparation, the new bead will not last. Around Kit's Coty, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
The cost reflects the work involved, not guesswork. That’s why we ask about the job first.
What you get with us
- Every job guaranteed for a year
- Colour agreed with you before we start
- Experience in homes, commercial sites and hotels
- More than 20 years in sealant work
See what affects the cost and our reviews.