Medway · England
Bathroom & kitchen resealing in Lidsing, Medway
Professional bathroom resealing in and around Lidsing, with every bit of old sealant taken out first and a 12-month guarantee.
- Failed sealant on the screen profile
- Black mould in the silicone that won’t clean off
- Gaps where the bath or tray has moved
About our bathroom resealing in Lidsing
A bead that has gone black, split or come away shouldn’t be left until there’s a leak. Just call 0345 464 0079 or drop us an email with a photo of the joints, and we will send you a clear quote for bathroom resealing in Lidsing. We’re often asked to deal with water getting behind the kitchen upstand and sealant that has split, shrunk or peeled away, across baths, wet rooms and kitchen worktops & upstands.
For a small place like Lidsing, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
The work is covered for a year after we finish. If there’s a problem with it, please phone 0345 464 0079 or email us.
- Place
- Lidsing (ME7)
- Wider area
- Medway
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What we’re called out for in Lidsing
Older sealant shrinks and hardens. In kitchens it often shrinks away from the back edge, opening a hairline gap that lets water and crumbs in. Heat from the hob and strong sprays speed it along.
Keep an eye out for any of the following:
- A bead that has pulled away from the tiles
- A joint torn by a bath that flexes
- Black mould in the silicone that won’t clean off
- Smears of silicone across the tiles
Letting a property close to Rainham (Kent) station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Comparing quotes
- The length of the guarantee
- How the surfaces are prepared before sealing
- Which sealant they’ll use, and why
- Whether they’re fully insured
What the job involves on each surface
Sinks & splashbacks
Next to the sink, the sealant has to cope with constant water, and a food-safe product where it’s needed. The bead is finished smooth so it wipes clean.
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so the joint is sealed in one unbroken line.
The process
Once we are on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take a couple of hours for a single bath or shower. Somewhere as small as Lidsing, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- Finally we tidy up and explain the cure time before we leave.
Before we arrive
- Let us know about stairs, lifts or work at height
- Plan for the work area to be out of bounds to pets and children
- Mention any sign-in or site rules at work premises
Getting a quote
Need a quote? Please ring 0345 464 0079 or email us and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Read more
Nearby places to Lidsing
Also in Lidsing
Landlords, agents and businesses in Lidsing
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
If you manage several properties in or around Lidsing, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.
Aftercare tips
Good habits help new joints last longer. A few tips:
- Squeegee the walls and tray after use
- Keep scourers and sharp tools away from the bead
- Check the joints every few months for splits or lifting
- Clean with a mild bathroom cleaner and a soft cloth
Good ventilation does more than any cleaner. Use the fan, or open a window, while you bathe and for a while afterwards, so the silicone gets a chance to dry.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Early resealing closes the gap before damage is done.
DIY versus a professional finish
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
How we quote for bathroom resealing
Every job gets its own quote. This is what makes a difference:
- The old material and how stubborn it is
- How easy the joints are to reach
- How many rooms, windows or areas are involved
- Whether there’s mould to deal with
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Helping us quote
Photos by email are helpful but not essential. Try to tell us:
- Access, such as stairs, a lift or height
- Photos by email, if that is easy
- What’s wrong with the joints now
- If it’s domestic, commercial or a hotel
To get a quote, ring 0345 464 0079 or email us with the location and a short description of the problem. You will have a clear quote before work begins.
Bathroom resealing in Lidsing: local notes
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Managing a site like Swingate Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Homes close to Church of St Peter include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Lidsing is about 2 miles south-east of Chatham, in Medway. Whether you are in the middle of Lidsing or further out, bathroom resealing is available for homes and businesses alike. Our Medway coverage runs to 68 places, and Lidsing is one of them. Chelmsford is on our list too, around 28 miles away.
Jobs for bathroom resealing in ME7 works the same way as everywhere else we cover. Neighbouring places we cover for bathroom resealing include Dunn Street (1 mile south-east), Bredhurst (1 mile east), Lordswood (1 mile north-west), Kemsley Street (1 mile east) and Scragged Oak (1 mile south-east). Larger places within reach include Gillingham (3 miles north), Rochester (5 miles north-west), Rainham (3 miles north-east), Strood (6 miles north-west), Luton (3 miles north) and Twydall (3 miles north).
Near you in Lidsing
Around Lidsing, our work takes us to homes and buildings near South Wood, The Harrow pub and Greenacre Academy, among other places. The closest station to Lidsing is Rainham (Kent) station, about 3.3 miles north-east. A little further out are Allington Castle (3.3 miles south-west) and Medway megaliths (2.8 miles west). Not far away are Boxley Hills and Burham Down.
Questions from Lidsing
Do you cover Lidsing for bathroom resealing?
Yes. Our work covers London and the South East, and Lidsing is part of that. You can call 0345 464 0079 or drop us an email and tell us what needs doing, and we will give you a clear price.
Do you work for landlords with property near Rainham (Kent) station?
Yes. We work for letting agents and landlords as well as homeowners, and several properties can be quoted together. Just phone 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear quote.
Do you guarantee your resealing?
Yes. We give a 12-month guarantee on every job, and we are ARBOMaster approved applicators.
My sealant has gone black. Can you sort it?
Yes. Once mould has grown into the silicone, it normally can’t be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
What sealant do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Where are you based?
We are based in Crawley, West Sussex, and we work across South East England, London and Scotland.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint before resealing.
Is it OK to put new sealant on top of the old bead?
No. It’s a common reason for reseals failing. The old joint is stripped, cleaned and resealed from scratch.