Aberdeen · Scotland
Bathroom Resealing in Kincorth
Our applicators work in Kincorth on bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and a one-year guarantee.
- Two layers of silicone, both failing
- Black mould in the silicone that will not clean off
- A bead that has pulled away from the tiles
How we handle bathroom resealing in Kincorth
Homes in Kincorth have the same weak spots as anywhere else: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Each one is stripped, cleaned and dried before new silicone goes in. We work on baths, shower trays & enclosures and wet rooms, and the jobs we see most are damp behind the bath or under the tray and a reseal done over the top of the old bead.
In Scotland’s cities, including the area around Kincorth, many older flats had their bathrooms added into small rooms later on. Rooms like that are often small and slow to dry out, which is hard on sealant and grout.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Place
- Kincorth (AB12, AB10)
- Wider area
- Aberdeen
- Cover
- One year on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Do you need bathroom resealing in Kincorth?
The wrong product fails fast. Acrylic caulk and general-purpose sealants aren’t designed for a joint that’s wet every day, so they stain, crack or go mouldy before long. Wet areas call for a sanitary silicone with an anti-fungal additive.
People usually contact us after spotting something like this:
- Mouldy sealant that has gone black
- New sealant laid over old sealant that is now lifting
- Leaks into the floor or ceiling below
- Smears of silicone across the tiles
If you look after a building such as Lochside Academy, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Comparing quotes
- How hidden problems are handled
- What product goes in the joint
- What preparation is included
- Which colour the sealant will be
Looking after it afterwards
Good habits help new joints last longer. A few tips:
- Wipe the sealant dry after showering
- Do not leave water standing on kitchen joints
- Avoid abrasive pads on the sealant
- Open a window or run the fan so the room dries
Do not stand bottles along the bead, as they hold water against it. A quick squeegee after showering helps the joint dry.
Watch for the early signs: lifting ends, gaps, dark shadows under the bead or a stain downstairs. If you spot one, it’s time to reseal.
What happens on the day
Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes around two hours for one bath or shower, longer for a whole bathroom. In a Scottish city, a lot of jobs are in tenement flats, up a common stair from a shared close. For a job in Kincorth, tell us the floor, how the door entry system works and where we can park nearby.
- Protection goes down around the bath, shower or worktop.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- Try not to wet indoor joints just before the visit
- Clear items away from the joints we’re working on
Ask for a quote
Every job is quoted individually, so the first step is telling us about yours. Just drop us a line at info@mrmastic.co.uk with the details.
Read more
What we can’t put right
We won’t take on work that will not last, so here’s what sealant can’t put right:
- A cracked shower tray or bath (that needs repair or replacement)
- Cracked or missing grout between tiles (that’s regrouting)
- Water coming from the plumbing rather than the joint
If you are not sure, just send an email to info@mrmastic.co.uk and we’ll give you a straight answer before booking.
What we seal
- Wet rooms
- Basins & vanity units
- Baths
- Kitchen worktops & upstands
- Sinks & splashbacks
- Shower trays & enclosures
Bathrooms and kitchens in Kincorth
Kincorth is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Aberdeen, the Granite City, has plenty of granite tenements, where, as in any flat, a failed seal can reach the flat below.
For landlords with property near Aberdeen station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. For an older house near a landmark such as Ruthrieston South Church, older homes can move a little, which is hard on rigid grout and tired sealant.
Kincorth is about 2 miles south of Aberdeen, in Aberdeen. Across the AB12 area, we can carry out bathroom resealing at your property. We cover 63 towns and villages across Aberdeen.
Here we cover the AB12 and AB10 postcode area for bathroom resealing. If you need bathroom resealing at a property on Laws Road, Deeside Lane and Gardner Road or anywhere close by, we can help. Close by, we work in Kaimhill (1 mile north-west), Broomhill (1 mile north-west), Garthdee (1 mile west), Ferryhill (1 mile north) and Charlestown (1 mile south). Within a short drive, we also cover Berryden (3 miles north), Dyce (7 miles north-west), Tillydrone (3 miles north), Portlethen (4 miles south), Cults (3 miles west) and Donside Village (4 miles north).
Local landmarks in Kincorth
We work in homes and buildings around Harlaw Academy and Duthie Park and the streets around them. The closest station to Kincorth is Aberdeen station, roughly 1.6 miles north of the centre. Well-known places in the area include Aberdeen Trades Hospitals (1.9 miles north) and Union Square Aberdeen (1.7 miles north). Not far away are Kincorth Hill and Upper Lake.
How we quote for bathroom resealing
Your quote is based on your job. We look at:
- Whether old sealant or filler has to be cut out
- Mould in or behind the old joints
- Which sealant suits the joint
- When we can work, for business premises
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote.
Asking for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Any access issues, like height or stairs
- The rough size of the job
- Whether it’s a home or a business
- Where the property is
We don’t publish a price list. Instead, your job gets its own clear quote. To get started, drop us a line at info@mrmastic.co.uk.
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Questions from Kincorth
Can you help a landlord with a rental near Aberdeen station?
Yes, rental work is part of what we do. You can drop us a line at info@mrmastic.co.uk with the address and a few details, and we’ll give you a fixed price before any work starts.
Could a leaking bath seal in my Kincorth flat reach the neighbours below?
Yes. With flats above and below, a leak from a failed seal rarely stays in one flat. Cutting out the old sealant and laying a fresh bead puts a stop to it.
Is the work guaranteed?
Yes. We give a 12-month guarantee on every job, and we’re ARBOMaster approved applicators.
Can mouldy silicone be sorted out?
Yes. Once mould has grown into the silicone, it usually cannot be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator.
Will there be a smell?
Possibly a little. It fades as the sealant cures.
Where do you work from?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
Is white the only colour available?
White and clear are the most common choices, but other colours can be used to suit tiles and worktops. Tell us what you’d like when you get in touch.
Also in Kincorth
Surface by surface
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so a neat, continuous bead matters.
Baths
Baths move more than any other fitting, so it’s filled with water before the bead goes on. That way the joint is laid with the bath at its heaviest and isn’t torn the first time it’s used.