Hampshire · England
Bathroom & kitchen resealing in Hatherden, Hampshire
Bath, shower, basin, wet room, worktop and sink resealing in Hatherden, with a one-year guarantee on every job. Ask us for a quote.
- Lumpy, uneven sealant from a DIY attempt
- Splits where the tray meets the wall
- Water getting behind the kitchen upstand
About our bathroom resealing in Hatherden
Showers work their sealant harder than baths. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We work on shower trays & enclosures, basins & vanity units and sinks & splashbacks, and people most often call us about smears of silicone across the tiles and a bead that has pulled away from the tiles.
For a small place like Hatherden, bathroom resealing is planned like any other job: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
We stand behind the work with a one-year guarantee, so you are not left on your own once the job is done.
- Location
- Hatherden (SP11)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Hatherden questions
Is Hatherden within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you do bathroom resealing in Hatherden?
Yes, Hatherden is within the area we cover. We work across London and the South East. You can phone 0345 464 0079 or send us an email and tell us what needs doing, and we’ll send you a clear quote.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Do you work for landlords and businesses?
Yes. As well as homeowners, we work for landlords, agents, businesses and hotels across Hampshire.
Will the old sealant be removed?
Yes, always, and completely. New sealant will not bond properly to old, so the joint is cleaned back first.
How do I get a quote for bathroom resealing in Hatherden?
We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
My sealant has gone black. Can you sort it?
Yes. The old sealant comes out, the mould is treated, and we reseal with anti-fungal sanitary silicone.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
How the visit works
We bring everything the job needs with us, so you don’t need to buy or prepare anything. Once we’ve agreed what’s being done, the area is protected and the work begins. It normally takes a couple of hours for a single bath or shower. Somewhere like Hatherden needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you’re told the cure time, normally around 24 hours.
Getting ready for the visit
- Move anything stored near the joints
- Let us know if you’ve seen damp or leaks
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we’ll take it from there.
Advice
Signs you need bathroom resealing in Hatherden
Mould is the reason many people want their sealant replaced. Steamy rooms that do not dry out give mould all the damp it needs, and once it has grown into the bead, cleaning rarely gets it out.
Keep an eye out for any of the following:
- Water getting behind the kitchen upstand
- A messy, uneven bead from a previous reseal
- Mouldy sealant that has gone black
- A reseal done over the top of the old bead
Letting a property close to Andover station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
What to look for in a quote
- Whether they seal over old material or remove it
- Whether you can choose the colour
- How long the guarantee is
- What preparation is included
Different surfaces, different methods
Baths
Most bath leaks begin along the long edge, particularly where there’s a shower over the bath. It gets one smooth bead of anti-fungal silicone.
Basins & vanity units
Basins take less water than showers, but the joint behind them is splashed every day. Old sealant there often goes black at the corners, and we treat it exactly as we would a bath.
What we cannot put right
New sealant can’t fix everything, and we’ll tell you before work begins. It will not solve:
- Movement from a bath with loose feet or no proper support
- A leaking waste, trap or valve
- Cracked or missing grout between tiles (that’s regrouting)
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think.
Joints and surfaces we work on
- Kitchen worktops & upstands
- Sinks & splashbacks
- Baths
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
Can I do it myself?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
How we quote for bathroom resealing
Every job gets its own quote. These are the things that affect it:
- How much old sealant there is and how hard it is to remove
- Mould in or behind the old joints
- The number of rooms or windows
- Access and height
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
What to tell us for a quote
Before you ask for a quote, have a think about:
- Any previous sealing or DIY work
- A few pictures by email, if you can
- How we’d reach the joints
- Where the job is, and your postcode
Call for a quick quote, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved and send you a clear quote.
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Give the silicone its full cure time
- Check the joints every few months for splits or lifting
- Open a window or run the fan so the room dries
- Dry worktop joints after washing up
Have a look at the joints every few months. A small split or a corner lifting is easy to spot, and if anything looks wrong, just ring 0345 464 0079 or drop us an email.
Worktop joints fail quietly. Splashes run behind the back edge and soak into the worktop, and the board underneath can swell. Resealing before that happens protects the worktop.
What bathroom resealing looks like in Hatherden
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Managing a site like Hatherden Church of England Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Homes close to Christchurch include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Hatherden is about 3 miles north of Andover, in Hampshire. Every kind of property in Hatherden is covered for bathroom resealing. Every job comes with our one-year guarantee. Our Hampshire coverage runs to 683 places, Hatherden among them. You can also see our page for Southampton, roughly 24 miles from Hatherden.
All of SP11 is covered for bathroom resealing. That includes homes and businesses on Hatherden Lane, The Close and Hatchet Lane and the roads around them. Neighbouring places we cover for bathroom resealing include Clanville (1 mile west), Foxcotte (2 miles south), Tangley (2 miles north-west), Penton Mewsey (2 miles south-west) and Charlton (2 miles south). Within a short drive, we also cover Andover (3 miles south), Hyde (15 miles south-east), Tidworth (7 miles west), Weeke (15 miles south-east), Ludgershall (5 miles west) and Whitchurch (8 miles east).
Local landmarks in Hatherden
Locally, jobs take us to homes and businesses close to The Hare & Hounds pub and Harrow Way Community School, among other places. For rail, the closest station is Andover station, roughly 2.9 miles south. A little further out are Andover War Memorial Hospital (2.6 miles south) and Andover Museum (3.2 miles south-east). For a walk, there’s Mill Lake and Anton Lakes.