Hampshire · England
Bathroom & kitchen resealing in Faberstown, Hampshire
Problem with your baths, showers and worktops in Faberstown? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Black spots spreading through the bead
- Shrunken sealant along the back of a worktop
- New sealant laid over old sealant that is now lifting
How we handle bathroom resealing in Faberstown
It isn’t only bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback get wet every single day, and water that gets into the back edge of a worktop can swell the board. We reseal them with a kitchen-suitable silicone, matched to the worktop where it’s on show. Typical jobs include leaking joints on a shower screen and water getting behind the bath panel, across shower trays & enclosures, basins & vanity units and wet rooms.
Being in a small place like Faberstown makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
Whatever the size of the job, it’s backed by our 12-month guarantee.
- Location
- Faberstown (SP11)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Honest limits
Before booking, it’s worth knowing the limits too:
- Damage behind the tiles that needs a tiler
- Failed grout lines across the wall
- A bath or tray that moves because it isn’t properly supported
If in doubt, phone 0345 464 0079 or email us and we will say what we think before you book.
Where we work in Faberstown
- Wet rooms
- Kitchen worktops & upstands
- Shower trays & enclosures
- Basins & vanity units
- Baths
- Sinks & splashbacks
How we quote for bathroom resealing
The quote reflects the job in front of us. We take into account:
- The type of sealant required
- How much old sealant there is and how hard it is to remove
- How many areas need sealing
- The number and length of the joints
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.
Asking for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Whether it has been sealed before
- Photos by email, if that is easy
- Access, such as stairs, a lift or height
- What’s wrong with the joints now
Getting a quote is simple: let us know what needs doing and where. Photos by email help us understand the job, and we will come back to you with a quote.
Faberstown homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Rented homes near Andover station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. In the older streets around Church of St Peter in the Wood, walls and floors in older homes can move, and sealant and grout show it first.
Faberstown is about 5 miles north-west of Andover, in Hampshire. Whether you are in the middle of Faberstown or further out, we cover bathroom resealing for every kind of property, from flats and houses to offices and hotels. Faberstown is one of 683 places in Hampshire where we work for bathroom resealing. We also work in Southampton, around 24 miles away.
Here we cover the SP11 postcode area for bathroom resealing. Bathroom resealing is available to properties on Andover Road and Shoddesden Lane. Other places close to Faberstown include Redenham (1 mile east), Appleshaw (1 mile east), Fyfield (2 miles south), Chute Forest (2 miles north-east) and Clanville (2 miles east). Further out, we also cover Andover (5 miles south-east), Tidworth (3 miles west), Whitchurch (11 miles east), East Anton (6 miles east), Overton (14 miles east) and Picket Piece (7 miles east).
Landmarks near Faberstown
For rail, the closest station is Andover station, about 4.7 miles south-east of the centre. A little further out are Andover War Memorial Hospital (4.5 miles south-east) and Ludgershall Castle (1.8 miles north-west). Green spaces nearby include Quarley Hill and Anton Lakes.
Leave it or put it right?
Mould removers can fade the surface of a stained bead, but where mould is inside the silicone it generally comes back. Cutting it out and resealing with anti-fungal silicone is the fix that lasts. In a small place like Faberstown, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.
Why book with us
- An ARBOMaster approved applicator
- Colour picked to suit the job
- Every job guaranteed for a year
- Anti-fungal sanitary silicone in wet areas
What the job involves on each surface
Baths
Most bath leaks begin along the long edge, particularly where there’s a shower over the bath. It gets one smooth bead of anti-fungal silicone, tooled so water cannot sit on it.
Sinks & splashbacks
Around the sink, we use a product suited to kitchens, and a food-safe product where it’s needed. The joint is laid neatly so it’s easy to wipe.
More services for Faberstown
Keeping the joints in good condition
A little care helps the new joints last. Our advice:
- Check the joints every few months for splits or lifting
- Keep scourers and sharp tools away from the bead
- Don’t leave water standing on kitchen joints
- Dry the bead with a towel now and then
Good ventilation does more than any cleaner. Use the fan, or open a window, while you bathe and for a while afterwards, so the bead dries out between uses.
Watch for the early signs: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. If you spot one, it’s time to reseal.
The process
There’s no need to move everything out, just the space around the work. We protect the rest, and the work takes half a day or less for one room, longer when the kitchen is included for a typical job. In a small place like Faberstown, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- We let it dry fully and fill the bath with water before sealing.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We tidy up and give you the cure time, normally around 24 hours.
Getting ready for the visit
- Clear the area around the work
- For indoor joints, keep the area dry beforehand if you can
- Mention if the joints have been sealed before
How to get a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we’ll talk you through the work.
Related advice
Common questions in Faberstown
Do you cover Faberstown for bathroom resealing?
Yes, Faberstown is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job, and we will send you a clear quote.
Can you help a landlord with a rental near Andover station?
Yes, we work for landlords and agents. You can call 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before work begins.
Which products do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we’ll tell you what we’re using.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
How long will the resealing take?
One bath or shower is around two hours’ work, old sealant removal included. A whole bathroom plus the kitchen may take most of the day.
Are you insured?
Yes, we’re fully insured for every job we do.
Is it worth trying it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs.
Can you quote for more than one area?
Yes, we can. More than one area can be quoted together.
DIY versus a professional finish
A DIY attempt does not rule out a professional job. We cut it out and start again.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.