Hampshire · England
Bathroom & kitchen resealing in Overton, Hampshire
Bathroom resealing in Overton from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Leaks into the floor or ceiling below
- New sealant laid over old sealant that is now lifting
- Smears of silicone across the tiles
Can I do it myself?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
About our bathroom resealing in Overton
Across Overton, the joints we reseal are the ones that fail in any home: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Every joint is cut out, cleaned and left dry before it’s resealed. If you are dealing with failed sealant on the screen profile and a reseal done over the top of the old bead, we can help.
In a smaller place like Overton, homes are mostly houses and bungalows rather than flats, some older and some much newer. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.
The work is covered for a year after we finish. If there’s a problem with it, please phone 0345 464 0079 or drop us an email.
- Where
- Overton (RG25)
- Region
- Hampshire
- Cover
- One year on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Why deal with it now?
The difference in a professional reseal is mostly what you don’t see: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Without that preparation, the new bead will not last. In a smaller place like Overton, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.
Why Overton customers choose us
- Fully insured
- Colour picked to suit the job
- White, clear, grey or another colour, product permitting
- 4.9 on Google from 180+ five-star reviews
Take a look at how sealant jobs are priced or our reviews.
Towns and villages near Overton
Also in Overton
What bathroom resealing looks like in Overton
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Overton station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. For an older house near a landmark such as Church of St Mary, older homes can move a little, which is hard on rigid grout and tired sealant.
Overton is about 7 miles west of Basingstoke, in Hampshire. If you need bathroom resealing in Overton, it’s easy to get a quote: please call 0345 464 0079 or email us. We are based in Crawley and cover Hampshire, Overton included. Our Hampshire coverage runs to 683 places, Overton among them. We also work in Reading, about 19 miles from Overton.
Work in RG25 is quoted and booked the same way as anywhere else. You will find streets such as High Street, Station Road and London Road. Other places close to Overton include Southington (1 mile west), Quidhampton (1 mile north), Laverstoke (2 miles south-west), Freefolk (2 miles west) and Deane (2 miles east). Within a short drive, we also cover Basingstoke (7 miles east), Winchester (13 miles south), Andover (10 miles west), Alton (14 miles south-east), Tadley (9 miles north-east) and Hook (14 miles east).
What’s near Overton
Locally, jobs take us to homes and businesses close to The Greyhound pub. The nearest railway station is Overton station, roughly 0.8 miles north of the centre.
What sealant work can’t fix
Sealant is not the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- Loose or hollow tiles, or failed tanking behind them
- A cracked shower tray or bath (that needs repair or replacement)
- Failed grout lines across the wall
If in doubt, call 0345 464 0079 or send us an email and we will say what we think before you book.
Surfaces we seal
- Basins & vanity units
- Kitchen worktops & upstands
- Sinks & splashbacks
- Shower trays & enclosures
- Baths
- Wet rooms
Looking after it afterwards
A little care helps the new joints last. Our advice:
- Look for lifting corners and small gaps now and then
- Give the silicone its full cure time
- Keep bottles off the sealant line
- Wipe the sealant dry after showering
Keep bottles and razors off the sealant line, because they trap water against the silicone. A quick squeegee after showering helps the joint dry.
Each shower pushes a little more water through a failed joint. Over time that water reaches floors, walls and ceilings. Resealing early stops it.
How it works
All our tools and materials come with us in the van. After a quick look at the joints together, the area is protected and the work begins. Most jobs take a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. In a smaller place like Overton, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, generally around 24 hours.
How to prepare
- Keep children and pets away from the work area
- Clear the area around the work
- Mention any sign-in or site rules at work premises
Ask for a quote
If you are in Overton and need bathroom resealing, ring 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and you’ll get a clear quote before work begins.
Read more
Signs you need bathroom resealing in Overton
Older sealant shrinks and hardens. Along worktops it tends to pull back from the wall, leaving a thin gap where water and food collect. Heat from the hob and strong sprays speed it along.
Look out for these signs:
- Water getting behind the bath panel
- A reseal done over the top of the old bead
- Water escaping at the shower enclosure
- Lumpy, uneven sealant from a DIY attempt
Managing a site like Overton Church of England Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What to look for in a quote
- Is VAT in the price?
- Whether all the old sealant comes out first
- How the colour is chosen
- What insurance they hold
Overton questions
Is Overton in your area for bathroom resealing?
Yes, Overton is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or email us and tell us what needs doing, and we’ll give you a clear quote.
I let a flat near Overton station. Can you help?
Yes, we work for landlords and agents. Just call 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear price.
Does the resealing come with a guarantee?
Yes, a one-year guarantee. Looking after the joint as we suggest helps it last.
How long does it take to reseal a bath or shower?
One bath or shower is around two hours’ work, including cutting out the old sealant. A full bathroom and kitchen can take most of a day.
When can I use the bath or shower again?
Normally after around 24 hours. You’ll get the exact cure time before we leave.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
Do you remove the old sealant?
Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.
Where are you based?
We work from Crawley. Our applicators cover Overton.
What the job involves on each surface
Basins & vanity units
The back of a basin gets wet every time someone washes. Corners behind basins are where mould tends to start, so it’s cut out and renewed just like a bath joint.
Baths
Acrylic baths give a little under load, while steel and cast iron baths move less but still settle when full. Loading the bath with water before sealing allows for it.