Hampshire · England
Remedial sealant & repairs in Faberstown, Hampshire
Specialist remedial sealant for Faberstown: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Caulk or the wrong sealant used in a wet area
- Gaps opening along the back of the worktop
- Leaks that keep coming back after resealing
How we handle remedial sealant in Faberstown
With more than 20 years’ experience, our applicators have seen most of the ways sealant can fail. We are fully insured ARBOMaster approved applicators, and remedial work carries our 12-month guarantee. We are often asked to deal with movement joints that have split or pulled away and thick, messy sealant smeared over tiles, across botched or over-sealed joints, shrunken worktop sealant and failed movement joints.
Around Faberstown, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
Big or small, it’s backed by our one-year guarantee.
- Where
- Faberstown (SP11)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What sealant work cannot fix
A few problems are outside what sealant work can do:
- Plumbing leaks behind walls or under trays
- A cracked shower tray or bath (that needs repair or replacing)
- Failed tanking or loose tiles behind the sealant
If you’re not sure, just call 0345 464 0079 or send us an email and we’ll give you a straight answer before you book.
Where we work in Faberstown
- Expansion joints
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Failed movement joints
- Shrunken worktop sealant
Surface by surface
Worktops & kitchens
If a worktop moves when you lean on it, the sealant will keep splitting. That needs refixing before resealing, which we’ll point out.
Windows & doors
A frame that keeps leaking may not be the mastic. If the frame joint isn’t the cause, we’ll say so.
Remedial sealant around Faberstown
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Andover station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Faberstown is about 5 miles north-west of Andover, in Hampshire. Across the SP11 area, our applicators can take on remedial sealant. We cover 683 towns and villages across Hampshire, from the larger towns to small villages. For nearby work, see our Southampton page, about 24 miles away.
Postcode districts we cover here for remedial sealant: SP11. If you need remedial sealant at a property on Andover Road and Shoddesden Lane or anywhere close by, we can help. Neighbouring places we cover for remedial sealant include Redenham (1 mile east), Appleshaw (1 mile east), Fyfield (2 miles south), Chute Forest (2 miles north-east) and Clanville (2 miles east). Larger places within reach include Andover (5 miles south-east), Tidworth (3 miles west), Whitchurch (11 miles east), East Anton (6 miles east), Overton (14 miles east) and Picket Piece (7 miles east).
Near you in Faberstown
For rail, the closest station is Andover station, roughly 4.7 miles south-east. Nearby you’ll also find Andover War Memorial Hospital (4.5 miles south-east) and Ludgershall Castle (1.8 miles north-west). Green spaces nearby include Quarley Hill and Anton Lakes.
What else we do in Faberstown
How we quote for remedial sealant
You’ll get a clear quote before any work starts. It takes into account:
- When we can work, for business premises
- How easy the joints are to reach
- The old material and how stubborn it is
- Whether there’s mould to deal with
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. You will know the price before we begin.
Helping us quote
There’s no need for technical detail. Just tell us:
- Whether it’s a home or a business
- How many joints, rooms or windows are involved
- The address or postcode of the job
- If someone has resealed it before
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved.
Should I try it myself first?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
The process
Before we leave, we go over the finished joints with you. The work normally takes a few hours for most joints, depending on how much old sealant has to come out, depending on how much there is to do. For a village or hamlet like Faberstown, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First we find out how and where the joint has failed.
- Every layer of old sealant is cut and cleaned out.
- Next, any mould is treated and the joint dried.
- Moving joints get backing and a flexible sealant to suit.
- Finally we finish the joint and talk you through what we found.
Preparing for the visit
- For indoor joints, keep the area dry beforehand if you can
- Keep pets and children clear of the area while we work
- Tell us about any previous sealing or DIY attempts
Getting a quote
We quote each job on its own, so start by telling us what you need. Just ring 0345 464 0079 or send us an email with the details, and photos are welcome.
Related advice
When to call us in Faberstown
Movement tears sealant that isn’t designed for it. Flexing baths, rocking trays and building movement joints will split a rigid or thin bead.
If you can see any of these, it’s time to have the joints looked at:
- Kitchen joints letting water behind the worktop
- Thick, messy sealant smeared over tiles
- A second bead peeling off the first
- Mould trapped under a layer of silicone
In the older streets around Church of St Peter in the Wood, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Questions to ask before booking
- What the cure time is
- How much experience the applicator has
- Is the old sealant removed completely?
- How the surfaces are prepared before sealing
Why act early in Faberstown
Stripping out botched sealant adds time to a reseal, but not by much: it takes a few hours for a typical bath or shower, longer where several layers have been applied. It’s far less disruption than resealing the same joint again and again. Where a wall is exposed, as many are in small places like Faberstown, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or email us and we will talk you through it.
Why Faberstown clients choose us
- 180+ five-star Google reviews
- 12-month guarantee on every job
- You choose the colour before work begins
- Experience in homes, commercial sites and hotels
Read our cost guide or what customers say.
Questions from Faberstown
Is Faberstown in your area for remedial sealant?
Yes. We work across London and the South East, and Faberstown is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job.
Can you help a landlord with a rental near Andover station?
Yes, we work for landlords and letting agents. Just phone 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear quote.
Can old silicone be taken off without scratching the tiles?
Yes. We avoid heavy scraping and use the right cleaner for each surface, so the new sealant bonds cleanly.
How long will it take to strip and reseal the joint?
A little longer than a standard reseal. For most joints, it’s a few hours.
How much does remedial sealant cost in Faberstown?
It depends on the job, so we quote each one individually. To get one, phone 0345 464 0079 or send us an email and let us know what needs doing and where.
What if resealing won’t fix my leak?
We check for that before we reseal. If the fault is elsewhere, you’ll know before any work is done.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. Repeat leaks generally come from over-sealing, movement or water getting in elsewhere, so we find that first.
What do you put in the joint?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.