Hampshire · England
Remedial sealant & repairs in Fyfield, Hampshire
Removing failed, mouldy or leaking sealant and putting it right for Fyfield, backed by a 12-month guarantee. Ask us for a quote.
- Gaps opening along the back of the worktop
- A shower that leaks however often it’s resealed
- Thick, messy sealant smeared over tiles
Keeping the joints in good condition
Aftercare is simple:
- Always have old sealant cut out, not covered
- Report a tray that rocks or a worktop that lifts
- Use a soft cloth, not a scourer, on silicone
- Ask why a joint failed before redoing it
Watch the joint over the first few weeks, particularly where the original failure was caused by movement. Should anything change, phone 0345 464 0079 or send us an email.
Warning signs: sealant lifting at the ends, a second bead visible on top of the first, black mould under the silicone, or stains below a bathroom. Any of them means it’s time for remedial work.
How we handle remedial sealant in Fyfield
If a joint fails again and again, something is causing it. Movement, the wrong product or a leak from somewhere else will beat any new bead. Finding that cause comes before any new sealant. We work on leaking tray & enclosure joints, mouldy bath & shower sealant and botched or over-sealed joints, and common reasons people get in touch are sealant that came away because the surface wasn’t prepared and worktop sealant that has shrunk and split.
In a village or hamlet like Fyfield, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
The work is covered for a year after we finish. If anything is not right with it, ring 0345 464 0079 or drop us an email.
- Location
- Fyfield (SP11)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quote
- A clear price before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Common questions in Fyfield
Can you help a landlord with a rental near Grateley station?
Yes. We work for landlords and letting agents as well as homeowners. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear price.
Will you come out to Fyfield?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Do you remove the old sealant?
Yes. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Can you reseal a split movement joint?
Yes. Backing sets the depth and stops the sealant sticking to the back, which lets it stretch.
Can old silicone be taken off without scratching the tiles?
Yes. We cut and lift the old sealant with tools suited to the surface, then clean off the residue. Any existing damage is pointed out before work begins.
How long should I leave it?
Most sealants are touch-dry well before they’re fully cured. We’ll give you the cure time for the product we used before we leave.
Someone sealed over the old bead. Can you fix it?
Yes. Both layers come out; new silicone does not bond to old silicone, which is why over-sealing fails.
What remedial sealant looks like in Fyfield
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Church of St Nicholas, walls and floors in older homes can move, and sealant and grout show it first.
Fyfield is about 4 miles west of Andover, in Hampshire. Anywhere in SP11, we cover remedial sealant for homes and businesses. Across Hampshire, we cover 683 places, and Fyfield is one of them. Our Southampton page covers work nearby, about 22 miles away.
Here we cover the SP11 postcode area for remedial sealant. You’ll find streets such as Fyfield Road, Grange Close and Duncan's Close. We also cover the places around Fyfield: Mullenspond (1 mile south-east), Thruxton (1 mile south), East Cholderton (1 mile south), Weyhill (1 mile east) and Appleshaw (2 miles north-east). We also work in nearby towns such as Andover (4 miles east), Hyde (15 miles south-east), Tidworth (4 miles north-west), Weeke (15 miles south-east), Ludgershall (3 miles north-west) and Whitchurch (11 miles east).
Around Fyfield
Around Fyfield, our work takes us to homes and buildings near The George Inn. For rail, the closest station is Grateley station, about 3.7 miles south-west. Nearby you’ll also find Ludgershall Castle (3.4 miles north-west) and Andover War Memorial Hospital (3.7 miles east). Green spaces nearby include Quarley Hill and Anton Lakes.
What happens on the day
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours for a typical bath or shower, longer where several layers have been applied, and the area is left clean. Somewhere as small as Fyfield, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Surrounding tiles, trays and frames are protected first.
- The botched or failed sealant is cut away completely.
- The joint is degreased and checked for movement and leaks.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
How to prepare
- Tell us if parking is tricky
- Let us know about earlier repairs to the joints
- Mention any sign-in or site rules at work premises
Get a quote
There’s no standard price list. Instead, we send you a clear quote for your job. To get started, ring 0345 464 0079 or drop us an email.
Advice
Landlord and commercial work in Fyfield
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Signs you need remedial sealant in Fyfield
Products get mixed up: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. Each fails in its own way.
Signs it’s time to call us include:
- Wide, uneven beads that look worse than the old ones
- Sealant peeling off a dusty or damp surface
- Black mould underneath the bead
- Movement joints that have split or pulled away
If you let a flat or house near Grateley station, a joint that keeps failing is best fixed properly while the property is empty.
Questions to ask before you book
- How the colour is chosen
- What preparation is included
- Whether the sealant suits the joint
- What happens if they find a problem under the old sealant
Also near Fyfield
What else we do in Fyfield
Why deal with it now?
It’s easy to scratch acrylic, enamel or an uPVC frame cutting out old sealant, and the residue left behind stops the next bead bonding. Careful stripping is where most of our time goes. In a small place like Fyfield, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Why book with us
- Domestic, commercial and hotel work
- Sanitary silicone with an anti-fungal additive in wet areas
- Arbo and Everbuild products
- White, clear, grey or another colour, product permitting
See our cost guide or what customers say.
When something else is needed
Before you book, it’s worth knowing the limits too:
- Sealant in an older building that needs testing for asbestos first
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- A tray or bath that is cracked
If in doubt, ring 0345 464 0079 or email us and we will say what we think before booking.
Joints and surfaces we work on
- Failed movement joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Expansion joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
Surface by surface
Movement & expansion joints
Some movement joints have been filled with mortar or grout. Where it can be raked out, we replace it with flexible sealant.
Worktops & kitchens
Old kitchen sealant pulls back from the wall over time. We strip it, degrease the joint and reseal.