Hampshire · England
Remedial Sealant in Mullenspond
Remedial sealant across Mullenspond and nearby, with every bit of old sealant taken out first and a 12-month guarantee.
- Repeat leaks from the same joint
- Sealant peeling off a dusty or damp surface
- Thick, messy sealant smeared over tiles
How the visit works
Before we leave, we go over the finished joints with you. The visit itself normally takes a few hours for a typical bath or shower, longer where several layers have been applied, depending on how much there is to do. In a small place like Mullenspond, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at how the sealant has failed and check for movement or a leak path.
- Every layer of old sealant is cut and cleaned out.
- We clean the joint, treat any mould and let it dry.
- Moving joints get backing and a flexible sealant to suit.
- The new joint is tooled neatly and we explain anything else we found.
Before we arrive
- On commercial sites, let us know about site rules
- Move anything stored near the joints
- Tell us about access, such as stairs, a lift or high-level joints
Ask for a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Related advice
Remedial sealant for homes and businesses in Mullenspond
With more than 20 years’ experience, our applicators have seen most of the ways sealant can fail. We’re fully insured ARBOMaster approved applicators, and every remedial job comes with a 12-month guarantee. If you have kitchen joints letting water behind the worktop and sealant peeling off a dusty or damp surface, we can help, on mouldy bath & shower sealant, failed movement joints and shrunken worktop sealant alike.
For a small place like Mullenspond, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
The work is covered for a year after we finish. If anything isn’t right with it, ring 0345 464 0079 or send us an email.
- Place
- Mullenspond (SP11)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Quotes for remedial sealant in Mullenspond
For a quick quote, just ask. The main things that affect it are:
- How many areas need sealing
- The old material and how stubborn it is
- When we can work, for business premises
- Access and height
The cost depends on how much there is to do, how much old material has to come out and access to the work. You will have a clear quote before any work starts.
What we need to know
There’s no need for technical detail. Just tell us:
- What’s wrong with the joints now
- Any previous sealing or DIY work
- The rough size of the job
- Where the property is
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. Whenever you are ready, call 0345 464 0079 or send us an email.
How the job changes by surface
Mouldy bath & shower sealant
Repeat mould usually points to a damp, poorly aired room. Along with resealing, we will mention if the room needs better ventilation.
Windows & doors
Some leaks around windows come from the wall or the window itself. We check the joint and tell you if it looks to be something else.
Common questions in Mullenspond
Do you work for landlords with property near Grateley station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before any work starts.
Can you do remedial sealant in Mullenspond?
Yes, Mullenspond is within the area we cover. We work across London and the South East. You can phone 0345 464 0079 or drop us an email and tell us what needs doing.
What should I tell you?
Only a few details: where it is, what you’ve noticed and how we reach it. After that, simply phone 0345 464 0079 or send us an email.
Do you have insurance?
Yes. Full insurance covers our work.
Where are you based?
Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.
Can you take off two layers of silicone?
Yes. It’s slower than a standard reseal, because every layer has to come out cleanly, but it’s what makes the new bead last.
Do you offer different sealant colours?
We help you choose a colour that suits, from white and clear to greys and other shades. The product needed can limit the range.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We will tell you what we’re using and why.
When something else is needed
New sealant cannot fix everything, and we will tell you before we start. It won’t solve:
- Sealant in an older building that needs testing for asbestos first
- A cracked shower tray or bath (that needs repair or replacing)
- Water damage behind tiles that needs a tiler
If in doubt, ring 0345 464 0079 or email us and we’ll say what we think before booking.
Joints and surfaces we work on
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Failed movement joints
- Expansion joints
- Botched or over-sealed joints
What we’re called out for in Mullenspond
Silicone only bonds to surfaces that are clean and dry. Soap film, dust, damp or old residue stop it gripping, and the joint starts to come away early.
It’s worth asking for a quote if you see:
- Products that weren’t meant for the joint
- Gaps opening along the back of the worktop
- Movement joints that have split or pulled away
- Repeat leaks from the same joint
Homes close to Church of St Nicholas include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.
What your quote should include
- What guarantee comes with the work
- Who does the work, and how experienced they are
- How the surfaces are prepared before sealing
- When the joint can take water or movement
Mullenspond homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
For site and facilities teams at buildings such as Amport Church of England Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. For landlords with property near Grateley station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Mullenspond is about 4 miles west of Andover, in Hampshire. From the centre of Mullenspond to the outskirts, we cover remedial sealant for every kind of property, from flats and houses to offices and hotels. Mullenspond is one of 683 places in Hampshire where we work for remedial sealant. Southampton is on our list too, about 22 miles from Mullenspond.
Every address in SP11 is within our area for remedial sealant. You’ll find streets such as Amesbury Road and Wiremead Lane, all of which we cover. Other places close to Mullenspond include East Cholderton (1 mile south), Thruxton (1 mile west), Fyfield (1 mile north-west), Weyhill (1 mile north-east) and Red Post Bridge (2 miles east). Further out, we also cover Winchester (15 miles south-east), Andover (4 miles east), Hyde (15 miles south-east), Tidworth (4 miles north-west), Weeke (14 miles south-east) and Stanmore (15 miles south-east).
Local landmarks in Mullenspond
Around Mullenspond, our work takes us to homes and buildings near White Horse Inn, among other places. The closest station to Mullenspond is Grateley station, roughly 3.4 miles south-west. A little further out are Ludgershall Castle (3.9 miles north-west) and Andover War Memorial Hospital (3.5 miles east). Open spaces near Mullenspond include Mill Lake and Quarley Hill.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
Looking after it afterwards
So the new joints stay in good condition:
- Keep movement joints clear of mortar and paint
- Find out why the sealant failed first
- Use a soft cloth, not a scourer, on silicone
- Do not wait for a small gap to become a leak
Go easy on the new sealant: no scraping, scouring pads or harsh chemicals.
A failing joint rarely gets better on its own. Every shower or downpour sends more water through, into floors, walls or ceilings. Sorting it early limits the damage.