Hampshire · England

Gutter, fascia & soffit sealing in Mullenspond, Hampshire

Specialist gutter sealing for Mullenspond: careful preparation, the right product and tidy work. Call for a quick quote.

  • Wet patches on the wall under a gutter joint
  • Open joints in fascias and soffits
  • Drips from gutter joints and end caps

Book gutter sealing in Mullenspond

How we handle gutter sealing in Mullenspond

Many dripping gutters are just a failed joint or end cap. We clean out the joint, dry it and reseal it using a gutter sealant. If the gutter itself has failed, we say so. If you have damp patches inside below a leaking gutter and water running down the wall below the gutter, we can put it right.

Outside joints can only be sealed when they’re dry, so work in Mullenspond is booked around the forecast. Let us know about access to every wall, plus any garages or outbuildings.

All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.

Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house
Where
Mullenspond (SP11)
Region
Hampshire
Guarantee
A year, on every job
Price
A clear price before any work starts
Call
0345 464 0079
Updated
26 October 2026

What we do, step by step

At the end, we look at the finished work together. The visit itself normally takes an hour or two for a few joints, longer for a full run, depending on the size of the job. Somewhere as small as Mullenspond, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. We look at the gutters, fascias and trims and agree the joints to seal.
  2. Each joint is cleaned and any old sealant removed.
  3. We make sure everything is dry.
  4. We apply exterior or gutter sealant and finish it neatly.
  5. We check our work before we leave.

Preparing for the visit

  • Mention any parking rules near the property
  • Tell us about any water getting in
  • Mention if the joints have been sealed before

Get a quote

It all starts with a short chat. Describe the problem, the location and the size of the job. Whenever you’re ready, phone 0345 464 0079 or email us.

Get a quick quote

Read more

Gutter sealing in Mullenspond: local notes

Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.

For an older house near a landmark such as Church of St Nicholas, old and new materials meet at the roofline and walls, which is where sealant earns its keep. For site and facilities teams at buildings such as Amport Church of England Primary School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.

Mullenspond is about 4 miles west of Andover, in Hampshire. For gutter sealing in and around Mullenspond, please ring 0345 464 0079 or email us for a quick quote. We’re based in Crawley and cover Hampshire. Our area takes in 683 places across Hampshire, large and small. You can also see our page for Southampton, about 22 miles away.

Here we cover the SP11 postcode area for gutter sealing. Whether your property is on Amesbury Road and Wiremead Lane or anywhere close by, we can help. We also cover the places around Mullenspond: East Cholderton (1 mile south), Thruxton (1 mile west), Fyfield (1 mile north-west), Weyhill (1 mile north-east) and Red Post Bridge (2 miles east). Within a short drive, we also cover Winchester (15 miles south-east), Andover (4 miles east), Hyde (15 miles south-east), Tidworth (4 miles north-west), Weeke (14 miles south-east) and Stanmore (15 miles south-east).

What’s near Mullenspond

Around Mullenspond, our work takes us to homes and buildings near White Horse Inn. The closest station to Mullenspond is Grateley station, about 3.4 miles south-west. Well-known places in the area include Ludgershall Castle (3.9 miles north-west) and Andover War Memorial Hospital (3.5 miles east). Not far away are Mill Lake and Quarley Hill.

Map of Mullenspond © OpenStreetMap contributors

Surface by surface

Roofline trims

We reseal trim joints with an exterior sealant suited to the material.

Soffit joints

We choose a sealant colour that suits the soffit.

DIY versus a professional finish

If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.

Why act early in Mullenspond

A bead squeezed onto a wet joint might hold for a while but it tends to peel off. Cleaning out and drying the joint first is what makes it last. In a small place like Mullenspond, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.

The cost depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. We give a clear quote before any work starts, so you know where you stand.

Why Mullenspond clients choose us

  • White, clear, grey or coloured to suit, where the product allows
  • Fully insured
  • A sealant colour to suit the surroundings
  • Approved under the ARBOMaster scheme

Read what affects the cost and our reviews.

Common questions in Mullenspond

Can you help a landlord with a rental near Grateley station?

Yes. We work for letting agents and landlords as well as homeowners, and several properties can go on one quote. You can call 0345 464 0079 or send us an email with the details for a clear quote.

Will you come out to Mullenspond?

Yes, Mullenspond is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

Can you work on commercial sites?

Yes, regularly. We can plan bigger jobs in stages to suit the site.

Do you seal gaps in fascias and soffits?

Yes. Our work is the joints, and if a board is damaged, we’ll tell you.

Do I need to be at home?

That depends on where the joints are. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.

How long does gutter sealing take?

It depends on the size of the job, but most jobs take an hour or two for a few joints, longer for a full run. We’ll tell you when we quote.

Can you match the sealant colour?

Usually, yes. Sealants come in white, clear, grey and other colours for many products, and we’ll agree it with you first.

What sealant do you use?

The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.

Landlords, agents and businesses in Mullenspond

If you manage several properties in or around Mullenspond, several properties can go on one quote. Send us the addresses and the work at each.

We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will quote.

How to look after the new joints

After the cure time, these simple habits help:

  • Have sagging gutters refixed early
  • Make sure downpipes aren’t blocked
  • Watch for drips in a downpour
  • Keep an eye out for wet patches below a joint

Give the sealant the cure time we tell you and avoid disturbing it.

Once roofline sealant splits, water can get behind it. Resealing early protects the boards and the wall below.

When to call us in Mullenspond

Gutter joints rely on seals that age. Temperature changes make gutters move and that movement opens up tired joints.

The problems people normally mention when they call are:

  • Open joints in fascias and soffits
  • Garage door frames letting rain in
  • Cracked sealant along roofline trims
  • Water dripping where gutter sections meet

Letting a property close to Grateley station? Then a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.

Before you book anyone

  • Which sealant they’ll use, and why
  • Whether VAT is included
  • How the surfaces are prepared before sealing
  • How much experience the applicator has

Our hiring checklist

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job