Hampshire · England
Gutter, fascia & soffit sealing in Hyde, Hampshire
Gutter sealing across Hyde and nearby, with old sealant always removed completely and a 12-month guarantee.
- Fascia boards with gaps between them
- Failed sealant on a garage door frame
- Old gutter sealant that has let go
How we handle gutter sealing in Hyde
Many dripping gutters are just a failed joint or end cap. The joint is cleaned, dried and resealed with a sealant made for guttering. If the gutter is broken or sagging, we’ll tell you. We work on roofline trims, garage door frames and gutter joints, and common reasons people get in touch are earlier gutter repairs that have peeled off and streaks down the brickwork from a leaking joint.
In a smaller place like Hyde, some homes face open ground, and walls and rooflines facing the weather take the worst of it. Joints on those sides are usually the first to go.
There’s a 12-month guarantee on every job.
- Where
- Hyde (SO23, SO22, SO20)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Outside joints around Hyde
The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you look after a building such as St Bede Church of England Primary School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. Homes close to St Bartholomew's Church include some older properties, and older walls, gutters and the joints where extensions meet them need a flexible sealant. Letting a property close to Winchester station? Then leaking gutter joints on a rental are best caught before they stain the walls.
Hyde is about 1 mile north of Winchester, in Hampshire. Homes, rented property, offices and hotels in Hyde is covered for gutter sealing, old or new, large or small. Every job comes with our one-year guarantee. Our Hampshire coverage runs to 683 places, Hyde among them. For nearby work, see our Southampton page (11 miles or so).
Every address in SO23, SO22 and SO20 is covered for gutter sealing. Local streets include Elm Road, Swan Lane and City Road, and we cover them all. We also cover the places around Hyde: Abbotts Barton (1 mile north-east), Winchester (1 mile south), Weeke (1 mile west), Highcliffe (1 mile south-east) and Bar End (1 mile south). Within a short drive, we also cover Eastleigh (7 miles south), Andover (12 miles north-west), Totton (13 miles south-west), Chandler's Ford (7 miles south-west), Hedge End (11 miles south) and Romsey (9 miles south-west).
Around Hyde
We work in homes and buildings around Peter Symonds College, Leigh House Hospital and The King Alfred pub. There’s a railway station in Hyde itself: Winchester station. A little further out are Winchester Castle (0.6 miles south-west) and Royal Observer Corps Museum (0.5 miles north). Open spaces near Hyde include Winnall Moors and Twyford Down.
Also near Hyde
Other services in Hyde
FAQs for Hyde
Will you come out to Hyde?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Winchester station. Can you help?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
Is it OK to seal over old sealant?
No, and we never do. It can look neat for a few weeks, but the new layer lifts away from the old one. The old sealant has to come out completely.
Where do you work from?
We are a Crawley-based firm, with over 20 years’ experience. Our area covers South East England, London and Scotland.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice.
Do you do commercial work?
Yes. We can plan bigger jobs in stages to suit the site.
What information do you need?
Just the basics: the address or postcode, what’s wrong and any access issues. Then phone 0345 464 0079 or drop us an email.
Is it messy?
Tidy work is part of the job. Nearby surfaces are protected, and the area is left clean when we finish.
For landlords and businesses
We also work for property managers and facilities teams in Hyde and across Hampshire. Several sites can be quoted together.
If you manage several properties in or around Hyde, several properties can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.
Honest limits
We won’t take on work that will not last, so these are the limits:
- Rotten or damaged fascia boards
- Problems with the roof covering
- Downpipes that are blocked or broken
If you’re not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer.
What we seal
- Gutter end caps
- uPVC fascias
- Roofline trims
- Soffit joints
- Garage door frames
- Gutter joints
DIY versus a professional finish
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Different surfaces, different methods
Garage door frames
The joint between frame and brickwork moves and weathers. An exterior sealant suits them.
Soffit joints
Soffit joints are sealed in a colour to suit, where one is available.
Aftercare tips
Joint life depends on how it’s used and looked after. We suggest:
- Rest ladders on the wall, not the gutter
- Watch the wall under the gutters for staining
- Look along the fascias for open joints
- Don’t leave a sagging gutter
Look at fascia and trim joints when you’re checking the gutters. Splits are easier to seal early.
The sooner a gutter leak is sealed, the less water reaches the wall. If we find a bigger problem, we will tell you.
Why deal with it now?
Replacing fascias because of open joints is normally unnecessary. A neat seal closes the gaps if the boards are sound. Around Hyde, water from a failed joint in an older home can soak into timber and plaster, and that’s a much bigger job than renewing the sealant.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are unsure, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
Why choose Mr Mastic in Hyde
- Any old sealant cut out fully, not covered over
- ARBOMaster approved applicator
- A sealant colour to suit the surroundings
- Full insurance on every job
Take a look at how sealant jobs are priced or what customers say.
What happens on the day
When we arrive, we look over the joints with you first. Surfaces next to the work are protected before any work begins. The work normally takes anything from an hour or two to a few hours. Parking around Hyde is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- We look at the gutters, fascias and trims and agree the joints to seal.
- Each joint is cleaned and any old sealant removed.
- The joints are dried.
- We apply exterior or gutter sealant and finish it neatly.
- The joints are checked once sealed.
How to prepare
- Tell us about any water getting in
- Where the joints are inside, avoid wetting them before we arrive
- Clear the area around the work
Ask for a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work and give you a clear quote.