Kent · England
Bathroom & kitchen resealing in Erriottwood, Kent
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Erriottwood and across Kent. Fully insured, ARBOMaster approved and guaranteed for a year.
- A reseal done over the top of the old bead
- Black mould in the silicone that will not clean off
- Water escaping at the shower enclosure
Bathroom resealing around Erriottwood
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
In the older streets around Church of St Peter and St Paul, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Managing a site like Lynsted and Norton Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Erriottwood is about 4 miles south-east of Sittingbourne, in Kent. From the centre of Erriottwood to the outskirts, we cover bathroom resealing for every kind of property, from flats and houses to offices and hotels. Erriottwood is one of 922 towns and villages in Kent we cover. You can also see our page for Chelmsford, about 33 miles away.
We cover every part of ME9 for bathroom resealing and the streets around it. Streets in the area include Christophers Row and Kingsdown Road, and we cover them all. We also cover Kingsdown (1 mile west), Lynsted (1 mile north), Newbury (1 mile north-west), Bapchild (1 mile north-west) and Bogle (1 mile north). Further out, we also cover Maidstone (11 miles west), Ashford (12 miles south), Canterbury (13 miles east), Sittingbourne (4 miles north-west), Whitstable (11 miles east) and Faversham (5 miles east).
Around Erriottwood
Locally, jobs take us to homes and businesses close to Black Lion Public House and Doddington Place Gardens. The nearest railway station is Teynham station, roughly 2.5 miles north-east. A little further out are Newnham Castle (1.3 miles south-east) and Sittingbourne Heritage Museum (3.2 miles north-west).
Bathroom resealing for homes and businesses in Erriottwood
Showers work their sealant harder than baths. Trays, enclosures, screen profiles and wet room floors all need a flexible, waterproof seal. They’re resealed with anti-fungal sanitary silicone, finished smooth so water drains away rather than collecting. We work on sinks & splashbacks, basins & vanity units and shower trays & enclosures, and the jobs we see most are failed sealant on the screen profile and splits where the tray meets the wall.
Being in a small place like Erriottwood makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
A 12-month guarantee comes as standard.
- Location
- Erriottwood (ME9)
- Region
- Kent
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
What else we do in Erriottwood
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Why it’s worth doing now in Erriottwood
Fresh sealant smartens a bathroom or kitchen with very little disruption, which matters if you are letting a property or selling it. A smeared, uneven DIY bead does the opposite. Where a wall is exposed, as many are in small places like Erriottwood, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Why choose Mr Mastic in Erriottwood
- A choice of colours where the product allows
- Trusted Arbo and Everbuild sealants
- Colour agreed with you before we start
- Old sealant always removed completely
Take a look at how sealant jobs are priced or what customers say.
Landlords, agents and businesses in Erriottwood
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Letting agents and landlords in Erriottwood can book us as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order.
Signs you need bathroom resealing in Erriottwood
Mould is the reason many people want their sealant replaced. Bathrooms without good ventilation keep the silicone damp for hours, and once it has grown into the bead, cleaning rarely gets it out.
Any of these means the joints need attention:
- Water getting behind the bath panel
- Gaps where the bath or tray has moved
- Water escaping at the shower enclosure
- A bead that has pulled away from the tiles
For landlords with property near Teynham station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
What your quote should include
- Is the old sealant removed completely?
- How the colour is chosen
- Whether they’re fully insured
- What product goes in the joint
Your questions about bathroom resealing in Erriottwood
Is Erriottwood within the area you cover?
Yes. Erriottwood is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do bathroom resealing in Erriottwood?
Yes. Our work covers London and the South East, and Erriottwood is part of that. Just call 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear price.
When can I use the bath or shower again?
We give you the cure time before we leave, and it’s generally around 24 hours. Using it sooner can damage the bead.
Does the resealing come with a guarantee?
Yes, a one-year guarantee. Good ventilation and gentle cleaning help it last.
Are you insured?
Yes. We are fully insured for every job we do.
Is it messy?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
How do I get a quote for bathroom resealing in Erriottwood?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Can you get rid of the black mould in my sealant?
Yes, we replace the mouldy bead. Sprays can fade the marks, but cutting it out and resealing is what lasts. Airing the room well helps stop it returning.
How the visit works
There’s no need to move everything out before we come, only the area right around the joints. We protect the rest, and the work takes a morning or an afternoon for most single baths and showers in most cases. For a village or hamlet like Erriottwood, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you are told the cure time, normally around 24 hours.
Preparing for the visit
- Plan for the work area to be out of bounds to pets and children
- Tell us about access, such as stairs, a lift or high-level joints
- Mention any leaks or damp you’ve noticed
Getting a quote
There’s no standard price list. Instead, your job gets its own clear quote. To arrange one, phone 0345 464 0079 or drop us an email.
Read more
How we quote for bathroom resealing
You will get a clear quote before work begins. It’s based on:
- Mould in or behind the old joints
- Working hours on commercial sites
- How many areas need sealing
- The old material and how stubborn it is
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we will explain what it covers.
Helping us quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- The type of property
- If someone has resealed it before
- Where the job is, and your postcode
- How we’d reach the joints
Every job is quoted individually, so start by telling us what you need. Just phone 0345 464 0079 or drop us an email with the details and send pictures if you have them.
What sealant work cannot fix
We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:
- Cracks in the tray itself rather than the joint
- Loose or hollow tiles, or failed tanking behind them
- Water getting in through the grout rather than the sealant
If in doubt, ring 0345 464 0079 or send us an email and we will say what we think before booking.
Surfaces we seal
- Wet rooms
- Kitchen worktops & upstands
- Baths
- Shower trays & enclosures
- Sinks & splashbacks
- Basins & vanity units