West Sussex · England
Bathroom Resealing in Crossbush
Our applicators work in Crossbush on bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.
- Black spots spreading through the bead
- A bead that has pulled away from the tiles
- Failed sealant on the screen profile
How we handle bathroom resealing in Crossbush
The bead of silicone around a bath, tray or worktop is what keeps water out of the gaps. When it splits, shrinks or turns black, water gets behind it into walls, panels and floors. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. We are often asked to deal with new sealant laid over old sealant that is now lifting and cracked, shrunken or lifting silicone, across sinks & splashbacks, shower trays & enclosures and baths.
Being in a small place like Crossbush makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
There’s a 12-month guarantee on every job, large or small.
- Where
- Crossbush (BN18)
- Wider area
- West Sussex
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Crossbush homes and their sealant
Crossbush is within about 3 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
In the older streets around The Parish Church of St Mary Magdalen, older homes can move a little, which is hard on rigid grout and tired sealant. For site and facilities teams at buildings such as The Littlehampton Academy, we reseal washrooms and kitchens in schools and businesses as well as homes.
Crossbush is about 2 miles north of Littlehampton, in West Sussex. We carry out bathroom resealing for householders, landlords and businesses in Crossbush and the surrounding area. Crossbush is one of 371 towns and villages in West Sussex we cover for bathroom resealing. We also work in Brighton, around 18 miles away.
Work in BN18 is quoted and booked the same way as anywhere else. We also cover Warningcamp (1 mile north-east), Poling (1 mile south-east), Lyminster (1 mile south-west), Arundel (1 mile north-west) and Toddington (1 mile south). Larger places within reach include Worthing (6 miles east), Bognor Regis (8 miles south-west), Chichester (11 miles west), Selsey (13 miles south-west), Shoreham-by-Sea (12 miles east) and Lancing (9 miles east).
Local landmarks in Crossbush
The nearest railway station is Arundel station, roughly 0.5 miles north-west of the centre. Well-known places in the area include Lyminster Siege Castle (0.5 miles north) and Rustington Museum (2.8 miles south-east). Open spaces near Crossbush include WWT Arundel and Highdown Hill.
Your questions about bathroom resealing in Crossbush
Do you take on hotel work around Crossbush?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Is Crossbush within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
What do you put in the joint?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Is it worth trying it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs.
Will there be a smell?
It depends on the product. Some products have a noticeable smell, others very little.
Do you guarantee your resealing?
Yes. Every job carries our one-year guarantee, and we are fully insured.
Will you leave a mess?
Tidy work is part of the job. We protect what’s around the joints.
Do you have insurance?
Yes. We are fully insured.
Surface by surface
Wet rooms
Wet rooms rely on sound joints at floor and wall junctions. They’re resealed with anti-fungal sanitary silicone, working on the surface joints, not the tanking or drainage.
Kitchen worktops & upstands
Water behind a laminate worktop can make the edge swell. A sound joint along the back edge stops that.
How we quote for bathroom resealing
The quote reflects the job in front of us. We look at:
- Mould in or behind the old joints
- Any working-time requirements on site
- The old material and how stubborn it is
- Whether the work is at height
The cost depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before we start, so you know where you stand.
Asking for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Whether it has been sealed before
- The type of property
- A few pictures by email, if you can
- Access, such as stairs, a lift or height
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we will take it from there.
Common problems we fix in Crossbush
Baths and trays move. An acrylic bath flexes under load, and a tray that isn’t fully bedded can rock. Over time the joint tears or pulls away from the tile.
Keep an eye out for these signs:
- Black spots spreading through the bead
- A joint torn by a bath that flexes
- New sealant laid over old sealant that is now lifting
- Leaking joints on a shower screen
For landlords with property near Arundel station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
What to look for in a quote
- Who turns up on the day
- What happens if the job turns out different
- Whether they seal over old material or remove it
- Which sealant they’ll use, and why
Work for landlords, hotels and businesses
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we’ll give you a quote.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
Looking after it afterwards
To keep the joints looking good and working properly:
- Keep scourers and sharp tools away from the bead
- Keep the fan on for a while after bathing
- Let new sealant cure fully before it gets wet
- Keep bottles off the sealant line
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the bead dries out between uses.
A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning generally will not remove it. Catching it early keeps it a simple reseal.
Places near Crossbush
Other services in Crossbush
DIY versus a professional finish
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
The process
There isn’t much for you to do on the day. Point us to the joints and we will get on with it. The work itself takes a morning or an afternoon for most single baths and showers, including the tidy-up. Somewhere as small as Crossbush, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Protection goes down around the bath, shower or worktop.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
How to prepare
- Mention any sign-in or site rules at work premises
- Mention if the joints have been sealed before
- Let us know if you’ve seen damp or leaks
Ask for a quote
For a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before any work starts.