West Sussex · England
Glazing Silicone in Crossbush
Glazing joints in Crossbush need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Water running down inside the glass
- A quick top-up bead that didn’t last
- Leaks from the base of a shower screen
Glazing silicone in Crossbush, done properly
Cracked, stained or lifting silicone on glass looks poor and can leak. It comes off cleanly, without marking the glass and reseal the joint. If you’re dealing with drips on the inside of a conservatory window and failed sealant around rooflight glass, we can put it right, whatever the surface.
In a village or hamlet like Crossbush, older cottages and farmhouses often have timber windows set in stone or brick. Not every older frame suits a modern silicone bead, and sometimes a traditional sand mastic is the better choice.
All our work comes with our 12-month guarantee, wherever you are in West Sussex.
- Where
- Crossbush (BN18)
- Region
- West Sussex
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Windows and doors in Crossbush
Crossbush is within about 3 miles of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on glazing joints and frame seals, especially on the side facing the sea. With historic houses such as Ecclesden Manor (about 3 miles east) nearby, there’s older building stock in the area around Crossbush as well as newer homes. Where a home is older, older timber frames in brick or stone need a different approach from a modern uPVC window.
Managing a site like The Littlehampton Academy? Then the mastic around its windows and doors needs looking after like any other building’s. For an older house near a landmark such as The Parish Church of St Mary Magdalen, the joint between an old wall and a newer frame is generally the first place rain gets in.
Crossbush is about 2 miles north of Littlehampton, in West Sussex. Crossbush gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Across West Sussex, we cover 371 places, and Crossbush is one of them. We also work in Brighton, about 18 miles from Crossbush.
All of BN18 is within our area for glazing silicone. Nearby, we also carry out glazing silicone in Warningcamp (1 mile north-east), Poling (1 mile south-east), Lyminster (1 mile south-west), Arundel (1 mile north-west) and Toddington (1 mile south). Larger places within reach include Worthing (6 miles east), Bognor Regis (8 miles south-west), Chichester (11 miles west), Selsey (13 miles south-west), Shoreham-by-Sea (12 miles east) and Lancing (9 miles east).
Around Crossbush
The nearest railway station is Arundel station, about 0.5 miles north-west of the centre. Nearby you’ll also find Lyminster Siege Castle (0.5 miles north) and Rustington Museum (2.8 miles south-east). Open spaces near Crossbush include WWT Arundel and Highdown Hill.
What affects the quote in Crossbush
You’ll get a clear quote before work begins. It takes into account:
- Which sealant suits the joint
- The old material and how stubborn it is
- The number of rooms or windows
- How easy the joints are to reach
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Helping us quote
What to tell us when you ask for a quote:
- If someone has resealed it before
- Where the job is, and your postcode
- The problem you’ve noticed
- Pictures of the joints, sent by email
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, call 0345 464 0079 or email us.
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Look over the glazing joints once a year
- Wipe the screen down after showering
- Avoid strong solvents on or near the sealant
- Keep scrapers and blades away from the silicone
Gentle products are best near the sealant. Strong solvents can soften or mark it.
Shower screen leaks can go unnoticed. Water can soak into the floor or reach the room below long before you see it.
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
What sealant work cannot fix
We’d rather tell you now than do work that will not last, so these are the limits:
- Frames that have decayed or split
- A sealed unit that has misted inside
- A roof that has moved or dropped
Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly.
Joints and surfaces we work on
- Rooflights
- Shower screens
- Conservatory frames
- Glass-to-frame joints
- Glass-to-glass joints
- Glass balustrade bases
The process
There’s no need to move everything out before we come, only the area right around the joints. Everything nearby is protected, and the job takes a few hours for most jobs in most cases. Somewhere as small as Crossbush, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, we check where the water gets in.
- We remove the old sealant carefully.
- We clean the glass and frame so the new silicone bonds.
- A neutral-cure glazing silicone is applied and tooled.
- Each joint is checked and, where possible, water-tested.
Getting ready for the visit
- Mention any parking rules near the property
- Where the joints are inside, avoid wetting them before we arrive
- Plan for the work area to be out of bounds to pets and children
How to get a quote
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will talk you through the work.
Advice
Common problems we fix in Crossbush
Sealant laid over old sealant doesn’t last. Plenty of leaks come from a quick top-up over the old bead, and water gets between the layers.
Any of these means the joints need attention:
- New silicone smeared over old sealant
- Rooflight joints letting water in
- Glass-to-glass joints that have split
- Leaks where conservatory glass meets the frame
Rented homes near Arundel station change hands often, and glazing joints are worth checking at the end of a tenancy, before a small leak grows.
What to look for in a quote
- Whether they’re fully insured
- Which colour the sealant will be
- Is VAT in the price?
- How long the guarantee is
Towns and villages near Crossbush
Other services in Crossbush
Common questions in Crossbush
Will you come out to Crossbush?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Does the coastal weather in Crossbush affect outside sealant?
Near the sea, outside joints face more wind, rain and salt than they would inland, so the choice of sealant and the preparation matter even more. It’s worth checking the walls that face the sea first.
Can you quote for more than one area?
Of course. Doing several areas at once is generally more efficient.
Can a conservatory leak be sealed?
If the water is coming in through failed sealant joints, yes. If the cause is the roof, a panel or a unit, we will say so.
Which silicone is used for glass joints?
A glazing-grade silicone is best. Ours is a neutral-cure glazing silicone with anti-fungal products in bathrooms.
Do you offer different sealant colours?
Generally, yes. Sealants come in white, clear, grey and other colours for many products, and we’ll agree it with you first.
Are you fully insured?
Yes. We’re fully insured, and we can confirm the details when we quote.
How long does the job take?
Most jobs take a few hours for most jobs, including the preparation. Your quote will say how long we expect yours to take.
Why deal with it now?
A leaking joint won’t fix itself. Water can damage frames, walls, flooring and furniture so early action saves a bigger repair. Around Crossbush, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.
What you get with us
- Every job guaranteed for a year
- Tidy, careful work
- 20+ years of sealant experience
- An ARBOMaster approved applicator
Read our cost guide or customer reviews.