Hampshire · England

Conford Bathroom Resealing

We cover Conford for bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly.

  • Water getting behind the bath panel
  • Splits where the tray meets the wall
  • New sealant laid over old sealant that is now lifting

Bathroom resealing near Conford

What affects the cost of bathroom resealing

Call for a quick quote. What matters most is:

  • When we can work, for business premises
  • The old material and how stubborn it is
  • The number of rooms or windows
  • How easy the joints are to reach

Doing several joints on one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You’ll get one clear quote for the whole job.

Helping us quote

Before you ask for a quote, have a think about:

  • What the problem is, such as mould, gaps, leaks or cracking
  • Any previous sealing or DIY work
  • A few photos by email, if you can
  • Access, such as stairs, a lift or height

There’s no standard price list. Instead, we send you a clear quote for your job. To arrange one, ring 0345 464 0079 or send us an email.

How we handle bathroom resealing in Conford

Sealant that is mouldy, cracked or peeling shouldn’t be left until there’s a leak. Just call 0345 464 0079 or send us an email with a photo of the joints, and you’ll get a clear quote before any work starts. We work on wet rooms, basins & vanity units and shower trays & enclosures, and the jobs we see most are leaks into the floor or ceiling below and water getting behind the kitchen upstand.

For a small place like Conford, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.

You’re covered for a year from the day we finish. If there’s a problem with it, please ring 0345 464 0079 or drop us an email.

Silicone being applied where a shower enclosure meets beige wall tiles
Location
Conford (GU30)
Wider area
Hampshire
Guarantee
One year on every job
Price
Quoted before any work starts
Phone
0345 464 0079
Updated
26 October 2026

What we are called out for in Conford

With age, silicone loses its stretch. In kitchens it often shrinks away from the back edge, opening a hairline gap that lets water and crumbs in. Hot pans and harsh cleaners don’t help.

Common reasons people contact us include:

  • A bead that has pulled away from the tiles
  • Water getting behind the bath panel
  • New sealant laid over old sealant that is now lifting
  • A messy, uneven bead from a previous reseal

For landlords with property near Liphook station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.

Before booking anyone

  • How long the guarantee is
  • When the joint can take water or movement
  • How the surfaces are prepared before sealing
  • Whether they seal over old material or remove it

10 questions to ask before you book

How to look after the new joints

Simple care keeps the joints in good condition. We recommend:

  • Give the silicone its full cure time
  • Check the joints every few months for splits or lifting
  • Keep the fan on for a while after bathing
  • Do not let bottles sit on the bead

In a kitchen, do not let water sit along the back of the worktop and keep hot pans off the bead. The drier the joint stays, the longer it lasts.

Each shower pushes a little more water through a failed joint. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Early resealing closes the gap before damage is done.

Conford: your questions answered

Do you work for hotels and guest houses in Conford?

Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.

Can you help a landlord with a rental near Liphook station?

Yes, we work for landlords and letting agents. Just ring 0345 464 0079 or email us and tell us about the property, and we will send you a clear quote.

How long before the new sealant can get wet?

Silicone is touch-dry quite quickly, but it takes longer to cure. Keep water off it for around 24 hours, or as long as we advise for that product.

What sealant do you use?

Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will tell you what we are using.

Do you remove the old sealant?

Always. Sealing over the old bead is the commonest cause of early failure, so we never do it.

Can you quote for more than one area?

Yes. Tell us about everything you’d like done.

Is there any odour?

That depends on the sealant. Some products have a noticeable smell, others very little.

Do you come to Conford?

Yes. We work in Conford and the rest of Hampshire, as part of our work across South East England, London and Scotland. For a quote, call 0345 464 0079 or send us an email.

Surface by surface

Wet rooms

In a wet room, the joints between floor and walls take standing water. They’re resealed with anti-fungal sanitary silicone, and our work is on the visible joints only.

Shower trays & enclosures

The vertical joint where a screen profile meets the wall is a common leak point. We reseal it along with the base of the enclosure, sealing the side the enclosure’s instructions call for.

How it works

At the end, we look at the finished work together and explain the cure time. The visit itself generally takes a morning or an afternoon for most single baths and showers, depending on how much there is to do. In a small place like Conford, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. Protection goes down around the bath, shower or worktop.
  2. We cut away the old sealant and clean off what’s left.
  3. Mould is treated, then the joint is left to dry thoroughly.
  4. Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
  5. We finish the joint, clear up and tell you how long to leave it before it gets wet.

How to prepare

  • Try not to wet indoor joints just before the visit
  • Let us know about stairs, lifts or work at height
  • Keep pets and children clear of the area while we work

Ask for a quote

A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.

Get a quick quote

Read more

Should I try it myself first?

Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.

A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

Landlords, agents and businesses in Conford

Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.

We also work for property managers and facilities teams in Conford and across Hampshire. Several sites can be quoted together.

What bathroom resealing looks like in Conford

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings. Conford has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.

Managing a site like Liphook Infant School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.

Conford is about 2 miles south-east of Bordon, in Hampshire. Every kind of property in Conford can book us for bathroom resealing, old or new, large or small. Every job comes with our one-year guarantee. Conford is one of 683 towns and villages in Hampshire we cover for bathroom resealing. Our Portsmouth page covers work nearby, about 22 miles away.

Every address in GU30 is within our area for bathroom resealing, from the main roads to the quietest streets. We also cover the places around Conford: Passfield (1 mile north-west), Weavers Down (1 mile south), Liphook (1 mile south-east), Longmoor (2 miles south-west) and Woolmer (2 miles west). Within a short drive, we also cover Farnborough (14 miles north), Fleet (13 miles north), Horndean (15 miles south-west), Aldershot (11 miles north), Alton (8 miles north-west) and Petersfield (8 miles south-west).

Landmarks near Conford

Typical jobs here are in homes near Bohunt School, among other places. The closest station to Conford is Liphook station, roughly 1.8 miles south-east. Other landmarks nearby include Chase Community Hospital (1.9 miles north-west). Not far away are Wheeler's Down and Deadwater Valley.

Map of Conford © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job