Hampshire · England

Bathroom & kitchen resealing in Longmoor, Hampshire

Our applicators work in Longmoor on bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.

  • Water escaping at the shower enclosure
  • Smears of silicone across the tiles
  • Black mould in the silicone that won’t clean off

Need bathroom resealing in Longmoor?

About our bathroom resealing in Longmoor

Showers work their sealant harder than baths. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We work on shower trays & enclosures, sinks & splashbacks and basins & vanity units, and the jobs we see most are black spots spreading through the bead and water escaping at the shower enclosure.

For a small place like Longmoor, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.

All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.

Where
Longmoor (GU33)
Wider area
Hampshire
Cover
12 months on all our work
Price
A clear price before we start
Phone
0345 464 0079
Page updated
26 October 2026
Mr Mastic applicator smiling as he applies silicone to the corner of a bath

Do you need bathroom resealing in Longmoor?

Older sealant shrinks and hardens. Along worktops it tends to pull back from the wall, opening a hairline gap that lets water and crumbs in. Hot pans and harsh cleaners do not help.

It’s worth asking for a quote if you see:

  • A bead that has pulled away from the tiles
  • Lumpy, uneven sealant from a DIY attempt
  • Water getting behind the kitchen upstand
  • A reseal done over the top of the old bead

Managing a site like Greatham Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.

What your quote should include

  • How the colour is chosen
  • Whether they seal over old material or remove it
  • Are they insured?
  • How much experience the applicator has

10 questions to ask before booking

Bathrooms and kitchens in Longmoor

Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.

Rented homes near Liss station change hands often, and fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.

Longmoor is about 3 miles south of Bordon, in Hampshire. For bathroom resealing in and around Longmoor, please call 0345 464 0079 or drop us an email for a quick quote. We cover Hampshire from our Crawley base. Longmoor is one of 683 towns and villages in Hampshire where we work. Our Portsmouth page covers work nearby (20 miles or so).

Every address in GU33 is covered for bathroom resealing. If you need bathroom resealing at a property on Woolmer Road, Roberts Road and Methuen Road or anywhere close by, we can help. We also cover Greatham (1 mile west), Woolmer (1 mile north-west), Liss Forest (2 miles south-west), The Mint (2 miles south) and Blackmoor (2 miles north-west). Larger places within reach include Havant (15 miles south), Fleet (14 miles north), Horndean (13 miles south-west), Aldershot (13 miles north), Alton (7 miles north-west) and Waterlooville (15 miles south-west).

Local landmarks in Longmoor

For rail, the closest station is Liss station, roughly 2.3 miles south-west of the centre. Well-known places in the area include The Romany Museum (3.4 miles north-west) and Chase Community Hospital (2.3 miles north). Green spaces nearby include Wheeler's Down and Liss Riverside Railway Walk North.

Map of Longmoor © OpenStreetMap contributors

What happens if it’s left?

Sorting it now is quick: the work takes two to three hours for a typical bath, depending on how much old sealant there is. Wait for a leak and you may be looking at panels off, drying out and redecorating too. Where a wall is exposed, as many are in small places like Longmoor, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.

No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.

Why book with us

  • Full insurance on every job
  • We leave the area clean and tidy
  • Approved under the ARBOMaster scheme
  • We never seal over old sealant

Read how sealant jobs are priced or our reviews.

Should I try it myself first?

If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.

A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

What sealant work cannot fix

Sealant isn’t the answer to every problem, and we’ll tell you before work begins. Sealant will not put right:

  • Water coming from the plumbing rather than the joint
  • Cracked or missing grout between tiles (that is regrouting)
  • A bath or tray that moves because it isn’t properly supported

Not sure which it is? You can ring 0345 464 0079 or drop us an email and we’ll tell you honestly.

Where we work in Longmoor

  • Baths
  • Kitchen worktops & upstands
  • Wet rooms
  • Shower trays & enclosures
  • Basins & vanity units
  • Sinks & splashbacks

What happens on the day

Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes half a day or less for one room, longer when the kitchen is included and we leave things clean and tidy. For a village or hamlet like Longmoor, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. Protection goes down around the bath, shower or worktop.
  2. We cut away the old sealant and clean off what’s left.
  3. We treat any mould and let the joint dry properly.
  4. Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
  5. We finish the joint, clear up and tell you how long to leave it before it gets wet.

Before we arrive

  • Tell us about access, such as stairs, a lift or high-level joints
  • Clear the area around the work
  • On commercial sites, let us know about site rules

Ask for a quote

Getting a quote is simple: tell us what needs doing and where and its rough size. Photos by email help us understand the job, and we’ll take it from there.

Ask for a quote

Related advice

Questions from Longmoor

Can you do bathroom resealing in Longmoor?

Yes. Our work covers London and the South East, and Longmoor is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job.

Is Longmoor within the area you cover?

Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.

Do you remove the old sealant?

Yes. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.

Do I have to be there?

For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.

Where do you work from?

We work from Crawley. We cover Longmoor and the rest of Hampshire, along with the rest of our area.

Are you fully insured?

Yes. We’re fully insured for domestic and commercial work.

What should I tell you?

Where the job is, what the problem is and roughly how big it is. Photos by email help too.

When can I use the bath or shower again?

Generally after around 24 hours. You’ll get the exact cure time before we leave.

How the job changes by surface

Kitchen worktops & upstands

Upstands and back edges are cut out, cleaned of grease and resealed, because cooking grease stops sealant bonding. Proper degreasing is what helps the new joint last.

Baths

Baths move more than any other fitting, so it’s filled with water before the bead goes on. The joint is then laid with the bath at its lowest point.

Landlord and commercial work in Longmoor

Letting agents often deal with us directly. Tell us the address, the job and how access works.

Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job