Hampshire · England
Conford External Mastic
We cover Conford for sealing brickwork movement joints, render, cladding and façade joints. Old material cut out, joints cleaned and sealed neatly.
- Panel joints letting water in
- Weeds or debris growing in open joints
- Failed seals between different materials
Leave it or put it right?
Resealing a run of joints in one go is usually better than patching one at a time. Joints of the same age tend to fail together. Where a wall is exposed, as many are in small places like Conford, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts.
Why us?
- Homes, businesses and hotels
- Arbo and Everbuild products
- Approved under the ARBOMaster scheme
- Fully insured
External mastic for homes and businesses in Conford
On houses, flats and commercial buildings across Conford, we reseal joints in brickwork, render, cladding and façade panels. The preparation is the same whatever the wall: clean, sound faces and a controlled depth. Common call-outs are for joints where the bead has come unstuck and plants rooting in failed movement joints, across render & cladding joints, copings & trims and concrete & block.
In a village or hamlet like Conford, older cottages and farm buildings often stand in the open, so walls and rooflines take the full force of wind and rain. Joints on those walls need a sealant that moves with the building and stays in place.
Each job carries a 12-month guarantee, whatever its size.
- Location
- Conford (GU30)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Quotes for external mastic in Conford
We do not publish a price list. What we look at:
- How easy the joints are to reach
- Working hours on commercial sites
- Any mould that needs treating
- How many rooms, windows or areas are involved
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What we need to know
Before you ask for a quote, have a think about:
- A few photos by email, if you can
- What’s wrong with the joints now
- If it’s domestic, commercial or a hotel
- Any access issues, like height or stairs
We do not publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or send us an email.
How the job changes by surface
Concrete and blockwork
Concrete faces can be dusty and porous, so preparation is key. We prime where the sealant needs it before the bead.
Brickwork movement joints
Brick movement joints are often mistaken for a missing mortar line. Where one has been mortared, we cut it out and reseal it with sealant.
What sealant work cannot fix
In fairness, there are a few things sealant will not fix:
- Damp that is not coming from the joint
- Adding movement joints to masonry that has none
- Movement that’s more than a sealant joint can take
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think before you book.
Where we work in Conford
- Brickwork movement joints
- Façade panels
- Concrete & block
- Copings & trims
- Joints between brick and frames
- Render & cladding joints
Do you need external mastic in Conford?
Using the wrong sealant is another common reason. A high-modulus or general-purpose sealant can be too rigid for a busy joint, and it tears off the sides.
It’s worth asking for a quote if you see:
- Joints with sealant missing in places
- Plants rooting in failed movement joints
- Rigid filler in a joint that should flex
- Joints where the bead has come unstuck
If you let a flat or house near Liphook station, split movement joints are easy to miss on a rental until damp shows inside.
What your quote should include
- Whether they’re fully insured
- Who turns up on the day
- How the joint is cleaned and prepared
- Whether VAT is included
External mastic in Conford: local notes
London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Schools such as Liphook Infant School are buildings too, and movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Conford is about 2 miles south-east of Bordon, in Hampshire. For external mastic in and around Conford, please ring 0345 464 0079 or email us for a quick quote. We cover Hampshire from our Crawley base. Conford is one of 683 places in Hampshire we cover. There’s also a page for Portsmouth, about 22 miles away.
Every address in GU30 is covered for external mastic. If you’re just outside Conford, we cover Passfield (1 mile north-west), Weavers Down (1 mile south), Liphook (1 mile south-east), Longmoor (2 miles south-west) and Woolmer (2 miles west). We also work in nearby towns such as Farnborough (14 miles north), Fleet (13 miles north), Horndean (15 miles south-west), Aldershot (11 miles north), Alton (8 miles north-west) and Petersfield (8 miles south-west).
Landmarks near Conford
Typical jobs here are in homes near Bohunt School and the streets around them. For rail, the closest station is Liphook station, about 1.8 miles south-east. Nearby you will also find Chase Community Hospital (1.9 miles north-west). The countryside around Conford includes Wheeler's Down and Deadwater Valley.
What else we do in Conford
How the visit works
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The job generally takes anything from a few hours to several days, depending on the building. For a village or hamlet like Conford, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We look at every joint and agree a colour to suit the wall.
- Failed sealant is removed back to clean, sound faces.
- Backing rod goes in so the sealant can stretch between the two faces.
- We prime the faces where required.
- A low-modulus exterior sealant is gunned in and tooled to a neat finish.
Preparing for the visit
- On commercial sites, let us know about site rules
- Tell us about access, such as stairs, a lift or high-level joints
- Move anything stored near the joints
How to get a quote
For external mastic in Conford, ring 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before we start.
Advice
FAQs for Conford
Do you work for landlords with property near Liphook station?
Yes. We work for landlords and letting agents as well as homeowners, and several properties can be quoted together. Just ring 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear price.
Do you cover smaller places like Conford?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Will the new joint stand out?
There’s a good range of exterior colours, including greys, browns, whites and stone tones. We pick the one that suits your wall best so it does not stand out.
How long should I leave it?
Different products cure at different speeds, so follow the cure time we give you when we finish.
How long does external mastic take?
Most jobs take anything from a few hours to several days, depending on the building, including preparation and clearing up. Your quote will say how long we expect yours to take.
Will there be a smell?
Sometimes, a little. It fades as the sealant cures.
Are you ARBOMaster approved?
Yes. We’re approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
Are you fully insured?
Yes. Mr Mastic is fully insured, and we have been doing sealant work for more than 20 years.
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Check external joints each spring
- Wash walls gently around the sealant
- Fix overflowing gutters above sealed joints
- Keep soil, plants and ivy away from the joints
Make sure anyone working on the wall later knows where the movement joints are. They should be kept open and resealed, not filled.
Act while the splits are small. At that stage it’s a simple cut out and reseal before water has had years to get in.