Medway · England
Bathroom Resealing in Capstone
We cover Capstone for bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- A bead that has pulled away from the tiles
- Leaking joints on a shower screen
- Shrunken sealant along the back of a worktop
Bathroom resealing in Capstone
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Capstone. We are fully insured ARBOMaster approved applicators, and every job carries our 12-month guarantee. If you have water getting behind the kitchen upstand and two layers of silicone, both failing, we can help, on shower trays & enclosures, basins & vanity units and baths alike.
Somewhere as small as Capstone, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
You’re covered for a year from the day we finish. If there’s a problem with it, please call 0345 464 0079 or send us an email.
- Place
- Capstone (ME7)
- Region
- Medway
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Bathroom resealing around Capstone
Capstone is within about 3 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Gillingham (Kent) station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. For an older house near a landmark such as All Saints Church, walls and floors in older homes can move, and sealant and grout show it first.
Capstone is about 1 mile south-west of Gillingham, in Medway. Wherever you are in the ME7 postcode area, we cover bathroom resealing for homes and businesses. Our Medway coverage runs to 68 places, Capstone among them. Our Chelmsford page covers work nearby, about 26 miles away.
Jobs for bathroom resealing in ME7 is quoted and booked the same way as anywhere else. If you are just outside Capstone, we cover Darland (1 mile north), Hale (1 mile north-west), Hempstead (1 mile south-east), Gillingham (1 mile north-east) and Chatham (1 mile west). We also work in nearby towns such as Rochester (4 miles north-west), Strood (4 miles north-west), Hoo St Werburgh (5 miles north), Rochester Riverside (3 miles north-west), Peters Village (4 miles west) and Brompton (3 miles north-west).
Around Capstone
In Capstone, that means homes and buildings near Chatham Grammar School for Girls, The Star pub and The Robert Napier School. For rail, the closest station is Gillingham (Kent) station, about 2 miles north of the centre. Other landmarks nearby include Medway Maritime Hospital (1.7 miles north-west) and Pentagon Shopping Centre (2.3 miles north-west). The countryside around Capstone includes Burham Down and Blue Bell Hill.
Do you need bathroom resealing in Capstone?
Sealing over old silicone is one of the commonest mistakes we find. New silicone won’t bond to old silicone, so it lifts, lets water in and traps mould underneath.
If you can see any of these, it’s time to have the joints looked at:
- Leaks into the floor or ceiling below
- Leaking joints on a shower screen
- Lumpy, uneven sealant from a DIY attempt
- Cracked, shrunken or lifting silicone
If you look after a building such as Hempstead Infant School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Before booking anyone
- Whether VAT is included
- The length of the guarantee
- Who turns up on the day
- How long to leave it before use
Why it’s worth doing now in Capstone
You do not need a new bathroom because the sealant looks bad. Replacing the joint is generally all it takes. If something else is wrong, we will tell you. Around Capstone, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we’ll explain what it covers.
Why choose Mr Mastic in Capstone
- Domestic, commercial and hotel work
- White, clear, grey or another colour, product permitting
- Colour picked to suit the job
- Approved under the ARBOMaster scheme
Read our cost guide or our reviews.
What affects the quote in Capstone
We quote each job individually. These are the things that affect it:
- Access and height
- Any mould that needs treating
- Whether old sealant or filler has to be cut out
- When we can work, for business premises
Combining jobs into one visit is generally more efficient than separate visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
What to tell us for a quote
You do not need to know the technical terms. Just tell us:
- If it’s domestic, commercial or a hotel
- The rough size of the job
- Any previous sealing or DIY work
- Pictures of the joints, sent by email
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand, and we will take it from there.
Surface by surface
Kitchen worktops & upstands
Upstands and back edges are cut out, cleaned of grease and resealed, because cooking grease stops sealant bonding. Proper degreasing is what helps the new joint last.
Shower trays & enclosures
A tray that rocks will split any sealant. We check for movement before we reseal, and if the tray needs refixing, we’ll say so.
FAQs for Capstone
I let a flat near Gillingham (Kent) station. Can you help?
Yes, we work for landlords and agents. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we’ll give you a clear price.
Do you cover smaller places like Capstone?
Yes. Capstone is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you remove the old sealant?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
How long does a bath or shower reseal take?
A single bath or shower takes about a couple of hours, old sealant removal included. A whole bathroom plus the kitchen may take most of the day.
Will it make a mess?
No. The area is protected while we work and cleaned up afterwards.
Are you insured?
Yes. We’re fully insured, with over 20 years’ experience in sealant work.
Do you guarantee your resealing?
Yes, a 12-month guarantee. Good ventilation and gentle cleaning help it last.
Can you do several jobs on one visit?
Yes, we can. More than one area can be quoted together.
DIY versus a professional finish
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Honest limits
We won’t take on work that will not last, so here’s what sealant can’t put right:
- Cracked or missing grout between tiles (that is regrouting)
- Cracks in the tray itself rather than the joint
- Damage behind the tiles that needs a tiler
Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly.
Where we work in Capstone
- Shower trays & enclosures
- Kitchen worktops & upstands
- Baths
- Wet rooms
- Sinks & splashbacks
- Basins & vanity units
What happens on the day
Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes around two hours for one bath or shower, longer for a whole bathroom. In a small place like Capstone, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by protecting the area and stripping out the old bead, including the film left on the tiles.
- Next, the joint is cleaned and any mould is treated.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- We tidy up and give you the cure time, generally around 24 hours.
How to prepare
- Mention any sign-in or site rules at work premises
- Let us know about earlier repairs to the joints
- Keep pets and children clear of the area while we work
Ask for a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.