Isle of Wight · England
Brookgreen Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing for householders, landlords and businesses in Brookgreen. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Leaks into the floor or ceiling below
- A reseal done over the top of the old bead
- Failed sealant on the screen profile
Bathroom resealing in Brookgreen
Sealant is the soft line between a bath, shower or worktop and the wall. Once it cracks or goes mouldy, water starts to find its way through. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. Typical jobs include black spots spreading through the bead and new sealant laid over old sealant that is now lifting, across shower trays & enclosures, sinks & splashbacks and kitchen worktops & upstands.
Somewhere as small as Brookgreen, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we’ll put it right.
- Place
- Brookgreen (PO30)
- Region
- Isle of Wight
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What happens on the day
At the end, we look at the finished work together and tell you how long to leave it. The visit itself usually takes around two hours for one bath or shower, longer for a whole bathroom, depending on the size of the job. Somewhere as small as Brookgreen, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by protecting the area and stripping out the old bead.
- Next, the joint is cleaned and any mould is treated.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We clear away and tell you when it can get wet, normally after around 24 hours.
Before we arrive
- Tell us about any water getting in
- Mention if the joints have been sealed before
- Tell us about access, such as stairs, a lift or high-level joints
Get a quote
There’s no standard price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To arrange one, ring 0345 464 0079 or drop us an email.
Read more
Why it’s worth doing now in Brookgreen
Sorting it now is quick: it takes a morning or an afternoon for most single baths and showers. Wait for a leak and you may be looking at panels off, drying out and redecorating too. Older cottages and farmhouses around Brookgreen can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before work begins.
What you get with us
- More than 20 years in sealant work
- Anti-fungal sanitary silicone in wet areas
- Fully insured
- Approved under the ARBOMaster scheme
See our cost guide or our reviews.
Bathrooms and kitchens in Brookgreen
Brookgreen is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
In and around Brookgreen, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint. In the older streets around St. Mary's Church, older homes can move a little, which is hard on rigid grout and tired sealant.
Brookgreen is about 7 miles south-west of Newport, in the Isle of Wight. Whether you’re in the middle of Brookgreen or further out, we cover bathroom resealing for every kind of property, from flats and houses to offices and hotels. Brookgreen is one of 125 places in the Isle of Wight we cover. You can also see our page for Southampton, about 19 miles away.
We work across PO30 for bathroom resealing. We also cover the places around Brookgreen: Brook (1 mile north-west), Hulverstone (1 mile north-east), Dunsbury (1 mile north-west), Chilton Green (1 mile east) and Shalcombe (2 miles north). Larger places within reach include Newport (7 miles north-east), Ryde (13 miles north-east), Cowes (10 miles north-east), Sandown (12 miles east), Shanklin (12 miles east) and Ventnor (11 miles east). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Local landmarks in Brookgreen
Nearby you’ll also find Brighstone Village Museum (2.2 miles east) and Yarmouth Castle (4.8 miles north-west). For a walk, there’s Westover Down.
Common questions in Brookgreen
Is Brookgreen in your area for bathroom resealing?
Yes, Brookgreen is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job.
Do you cover smaller places like Brookgreen?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do the sealants smell?
That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Is it OK to put new sealant on top of the old bead?
No. New silicone will not bond to old silicone, so it lifts and traps water and mould underneath. All the old sealant comes out first.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can landlords and businesses book you?
Yes. Domestic, commercial and hotel work are all part of what we do.
Is it messy?
No. We work neatly, protect the area around the joints and tidy up afterwards.
How long before the new sealant can get wet?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Keep water off it for around 24 hours, or as long as we advise for that product.
How we quote for bathroom resealing
The price is agreed before any work begins. It takes into account:
- Whether there’s mould to deal with
- The number of rooms or windows
- Which sealant suits the joint
- Access and height
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Call for a quick quote and we will explain what it covers.
Asking for a quote
There’s no need for technical detail. Just tell us:
- What’s wrong with the joints now
- Where the property is
- How we’d reach the joints
- Whether it’s a home or a business
To get a quote, phone 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We will send you a clear quote before any work starts.
For landlords and businesses
We also work for property managers and facilities teams in Brookgreen and across the Isle of Wight. Several sites can go on one quote, and we are fully insured for the work.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
How the job changes by surface
Wet rooms
If a wet room leaks, the cause may be the tanking or the drain rather than the joints. We reseal the joints and will tell you if the water seems to be coming from somewhere else.
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so a neat, continuous bead matters.
DIY sealant or a professional job?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Looking after it afterwards
Looking after new joints is easy, and it makes a real difference:
- Look for lifting corners and small gaps now and then
- Run the extractor fan during and after every shower
- Let new sealant cure fully before it gets wet
- Squeegee the walls and tray after use
Give the silicone time to cure before it gets wet, following the cure time we give you. After that, a quick wipe after showering helps keep it clean.
A few black dots in the silicone soon become a black line. When it has grown right through, it rarely cleans out, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.