Kent · England
Bredgar Bathroom Resealing
Bathroom resealing for Bredgar, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Sealant that has split, shrunk or peeled away
- Water getting behind the kitchen upstand
- Lumpy, uneven sealant from a DIY attempt
Bathroom resealing in Bredgar
It is not only bathrooms. Worktop upstands, sink edges and splashback joints get wet every single day, and water behind a laminate worktop can make it swell. We reseal them with a kitchen-suitable silicone, matched to the worktop where it’s on show. We work on basins & vanity units, sinks & splashbacks and wet rooms, and people most often call us about water getting behind the bath panel and a messy, uneven bead from a previous reseal.
Being in a small place like Bredgar makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Place
- Bredgar (ME9)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Landlord and commercial work in Bredgar
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
What happens if it’s left?
Fresh sealant smartens a bathroom or kitchen with very little disruption, which helps when a home is being let or put on the market. A smeared, uneven DIY bead does the opposite, and it’s harder to put right later. Around Bredgar, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we will talk you through it.
Why us?
- ARBOMaster approved applicator
- Quality sealants from Arbo and Everbuild
- Sealant colour chosen to suit
- Sanitary silicone with an anti-fungal additive in wet areas
Take a look at how sealant jobs are priced and customer reviews.
Other services in Bredgar
Bredgar questions
Do you work for landlords with property near Sittingbourne station?
Yes, we work for landlords and agents. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we will send you a clear quote.
Will you come out to Bredgar?
Yes, Bredgar is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Will there be a smell?
That depends on the sealant. Some smell for a while, some hardly at all.
Can you just seal over the old silicone?
No, and it’s one of the main reasons reseals fail. We cut out all of the old sealant, clean the joint and start again.
What colours of sealant can you use?
We can use white, clear or a colour to suit. On a worktop we colour-match where the joint shows.
Do you guarantee your resealing?
Yes, a 12-month guarantee. Looking after the joint as we suggest helps it last.
Where do you work from?
Mr Mastic is based in Crawley. We cover Bredgar and the rest of Kent.
Does someone need to be in?
That depends on where the joints are. Inside work needs someone to give us access.
Do you need bathroom resealing in Bredgar?
Baths and trays move. Acrylic in particular gives slightly under the weight of water and a person, while a poorly supported tray can shift underfoot. That movement works at the bead until it splits or peels away.
The problems people usually mention when they call are:
- Water getting behind the bath panel
- Cracked, shrunken or lifting silicone
- Gaps between the worktop and the wall
- Black mould in the silicone that won’t clean off
Letting a property close to Sittingbourne station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
What to look for in a quote
- What preparation is included
- What guarantee comes with the work
- Whether they seal over old material or remove it
- Whether VAT is included
What we can’t put right
Sealant is not the answer to every problem, and we’ll tell you before we start. Sealant will not put right:
- A tray or bath that’s cracked through
- Water getting in through the grout rather than the sealant
- A bath or tray that moves because it isn’t properly supported
Not sure which it is? You can call 0345 464 0079 or email us and we will tell you honestly before you book.
Joints and surfaces we work on
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Wet rooms
- Sinks & splashbacks
- Kitchen worktops & upstands
What the job involves on each surface
Baths
A bath shifts slightly every time it’s filled, so it’s filled with water before the bead goes on. That way the joint is laid with the bath at its heaviest and is not torn the first time it’s used.
Shower trays & enclosures
Water often gets past the wall profile of a shower enclosure. It’s resealed along with the tray joints, following the enclosure maker’s guidance on which side to seal.
Should I try it myself first?
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Bredgar homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Homes close to Church of St John the Baptist include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Managing a site like Bredgar Church of England Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Bredgar is about 3 miles south-west of Sittingbourne, in Kent. If you need bathroom resealing in Bredgar, please call 0345 464 0079 or send us an email for a quick quote. We cover Kent from our Crawley base, Bredgar included. Bredgar is one of 922 places in Kent where we work. You can also see our page for Chelmsford, roughly 31 miles from Bredgar.
All of ME9 is within our area for bathroom resealing, from the main roads to the quietest streets. Local streets include The Street, Medlar Close and Primrose Lane, all of which we cover. We also cover the places around Bredgar: Silver Street (1 mile west), Oad Street (1 mile north-west), South Green (2 miles west), Danaway (2 miles north-west) and Chestnut Street (2 miles north). Larger places within reach include Maidstone (8 miles south-west), Ashford (14 miles south-east), Sittingbourne (3 miles north-east), Whitstable (15 miles east), Faversham (8 miles east) and Minster (9 miles north-east).
Around Bredgar
Typical jobs here are in homes near Westlands School and Cromers Wood. Bredgar’s nearest station is Sittingbourne station, roughly 2.6 miles north-east of the centre. Well-known places in the area include Sittingbourne Heritage Museum (2.7 miles north-east) and Bayford Court (2.9 miles north-east). Not far away are Detling Hill.
What we do, step by step
Good joint work is mostly preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. In total, it generally takes a couple of hours for a single bath or shower. For a village or hamlet like Bredgar, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, usually around 24 hours.
How to prepare
- Keep children and pets away from the work area
- Tell us about access, such as stairs, a lift or high-level joints
- On commercial sites, let us know about site rules
Ask for a quote
To get a quote, ring 0345 464 0079 or drop us an email with the location and a short description of the problem. We’ll give you a clear quote before any work starts.