Kent · England
Bathroom Resealing in Oad Street
Bath, shower, basin, wet room, worktop and sink resealing for Oad Street, backed by a 12-month guarantee. Call for a quick quote.
- Failed sealant on the screen profile
- Shrunken sealant along the back of a worktop
- Sealant that has split, shrunk or peeled away
Oad Street: your questions answered
Do you cover Oad Street for bathroom resealing?
Yes, Oad Street is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or send us an email and let us know what needs doing, and we’ll send you a clear quote.
Is Oad Street within the area you cover?
Yes. Oad Street is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you just seal over the old silicone?
No, and it’s one of the main reasons reseals fail. We cut out all of the old sealant, clean the joint and start again.
Do you reseal kitchen worktops and sinks too?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then we reseal in a colour to suit.
Can you work on commercial sites?
Yes, regularly. Larger jobs can be planned room by room or area by area.
Will it make a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Where are you based?
Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.
How do I get a quote for bathroom resealing in Oad Street?
It depends on the job, so we quote each one individually. For a quick quote, phone 0345 464 0079 or send us an email and tell us what needs doing and where.
About our bathroom resealing in Oad Street
Sealant that is mouldy, cracked or peeling is worth sorting before it lets water through. Just phone 0345 464 0079 or email us with a photo of the joints, and we will send you a clear quote before any work starts. Typical jobs include failed sealant on the screen profile and two layers of silicone, both failing, on basins & vanity units, shower trays & enclosures and sinks & splashbacks.
In a village or hamlet like Oad Street, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Each job carries a 12-month guarantee.
- Place
- Oad Street (ME9)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Landlord and commercial work in Oad Street
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
For anyone letting property in or around Oad Street, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and photos by email help.
Nearby places to Oad Street
More services for Oad Street
Quotes for bathroom resealing in Oad Street
Call for a quick quote. The main things that affect it are:
- Working hours on commercial sites
- Which sealant suits the joint
- Any mould that needs treating
- The old material and how stubborn it is
We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or email us and we’ll talk you through it.
Helping us quote
To help us quote quickly, please include:
- A few pictures by email, if you can
- Whether it’s a home or a business
- Where the property is
- Roughly how big the job is
Every job is quoted individually, so the first step is telling us about yours. Just call 0345 464 0079 or email us with the details and send photos if you have them.
When something else is needed
Sealant is not the answer to every problem, and we’d rather say so up front. It will not solve:
- Cracked or missing grout between tiles (that is regrouting)
- A tray that rocks until it’s re-bedded
- Tiles that have come away from the wall
If you are not sure, just phone 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Where we work in Oad Street
- Shower trays & enclosures
- Basins & vanity units
- Sinks & splashbacks
- Kitchen worktops & upstands
- Wet rooms
- Baths
Surface by surface
Basins & vanity units
On a basin, neatness shows: so we keep the line tidy and even, in white, clear or a colour to suit.
Baths
The long joint down the side of a bath is where most leaks start, especially under a shower. It gets one smooth bead of anti-fungal silicone.
Keeping the joints in good condition
So the new joints stay in good condition:
- Keep the fan on for a while after bathing
- Wipe the sealant dry after showering
- Let new sealant cure fully before it gets wet
- Dry worktop joints after washing up
Give the silicone time to cure before it gets wet, which is generally around 24 hours. After that, a quick wipe after showering helps keep it clean.
Do not wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and replacing it when it fails protects the rest of the room.
Leave it or put it right?
Fresh sealant smartens a bathroom or kitchen with very little disruption, which helps when a home is being let or put on the market. A smeared, uneven DIY bead does the opposite, and it’s harder to put right later. Where a wall is exposed, as many are in small places like Oad Street, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we will go through it with you.
Why book with us
- You choose the colour before work begins
- Over 20 years’ experience
- Neat joints and a tidy finish
- Sanitary silicone with an anti-fungal additive in wet areas
See our cost guide or our reviews.
Bathrooms and kitchens in Oad Street
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Managing a site like Borden Church of England Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Rented homes near Newington station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. In the older streets around Church of St Peter and St Paul, older homes can move a little, which is hard on rigid grout and tired sealant.
Oad Street is about 3 miles south-west of Sittingbourne, in Kent. For bathroom resealing in and around Oad Street, it’s easy to get a quote: please call 0345 464 0079 or drop us an email. We cover Kent from our Crawley base, Oad Street included. Our Kent coverage runs to 922 places, Oad Street among them. You can also see our page for Chelmsford, roughly 30 miles from Oad Street.
Every address in ME9 is within our area for bathroom resealing, from the main roads to the quietest streets. Close by, we work in Danaway (1 mile north-west), Chestnut Street (1 mile north), Silver Street (1 mile south-east), Bredgar (1 mile south-east) and South Green (2 miles south-west). Further out, we also cover Maidstone (8 miles south-west), Ashford (15 miles south-east), Sittingbourne (3 miles north-east), Gravesend (15 miles north-west), Whitstable (15 miles east) and Faversham (9 miles east).
Around Oad Street
Around Oad Street, our work takes us to homes and buildings near Plough & Harrow pub and Westlands School. Oad Street’s nearest station is Newington station, about 1.9 miles north. A little further out are Court Hall Museum (2.7 miles north-east) and Bayford Court (2.9 miles east). Not far away are Detling Hill.
How the visit works
On the day, we look over the joints with you first. We protect the surfaces around the joints before any work begins. The work normally takes a morning or an afternoon for most single baths and showers. In a small place like Oad Street, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by protecting the area and stripping out the old bead, including the film left on the tiles.
- Next, the joint is cleaned and any mould is treated.
- The joint is left to dry, and baths are filled with water first.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- Finally we tidy up and explain the cure time before we leave.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Mention if the joints have been sealed before
- Let us know about parking restrictions
How to get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.