Kent · England
Oad Street Remedial Sealant
Problem with your failed sealant joints in Oad Street? We remove the old material, prepare the joints and seal them properly.
- Torn expansion joints
- Sealant that came away because the surface wasn’t prepared
- A second bead peeling off the first
What happens on the day
Once we are on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere as small as Oad Street, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
Preparing for the visit
- On commercial sites, let us know about site rules
- Let us know if you’ve seen damp or leaks
- Let us know about earlier repairs to the joints
Ask for a quote
Every job is quoted individually, so start by telling us what you need. Simply phone 0345 464 0079 or email us and describe the job and send pictures if you have them.
Advice
Remedial sealant in Oad Street
Remedial jobs in Oad Street usually fall into a few patterns: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. We strip each one back and start from scratch. If you are dealing with gaps opening along the back of the worktop and black mould underneath the bead, we can help, on mouldy bath & shower sealant, botched or over-sealed joints and failed movement joints alike.
Around Oad Street, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
Big or small, you get the same one-year guarantee.
- Location
- Oad Street (ME9)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Leave it or put it right?
Adding more sealant is the usual quick fix, and it rarely works. It does not grip the old layer, so the leak carries on and there’s now more to remove. Where a wall is exposed, as many are in small places like Oad Street, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Why book with us
- Every job guaranteed for a year
- Over 20 years’ experience
- Sanitary silicone with an anti-fungal additive in wet areas
- Tidy, careful work
Take a look at how sealant jobs are priced or what customers say.
For landlords and businesses
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Mouldy or split sealant often shows up at the end of a tenancy. Several properties can go on one quote.
What the job involves on each surface
Mouldy bath & shower sealant
Mould can sit behind the silicone, not just in it. We treat the exposed joint once the bead is out.
Over-sealed & botched joints
Every layer has to come out, including the smears and film on surrounding tiles. Only a clean joint will take a new bead.
Oad Street: your questions answered
Will you come out to Oad Street?
Yes. Oad Street is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you help a landlord with a rental near Newington station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we’ll give you a clear price.
Do you offer different sealant colours?
Yes. White, clear and grey are common, and other colours are available, and we’ll agree it with you first.
How long should I leave it?
Most sealants are touch-dry well before they’re fully cured. We will tell you how long to leave the joint before we leave.
What information do you need?
A short description and the location, plus pictures if you have them. We’ll ask anything else we need to know.
Is there any odour?
Sometimes, a little. Any smell clears as the sealant cures.
Will you leave a mess?
Tidy work is part of the job. Nearby surfaces are protected, and we clear up when we are done.
Can you remove old sealant without damaging the bath?
Yes. Residue is removed with a product suited to the surface rather than scraped hard.
Looking after it afterwards
Joint life depends on how it’s used and looked after. We suggest:
- Keep the room well ventilated
- Do not point over movement joints
- Deal with small splits early
- Never seal over old silicone
Watch the joint over the first few weeks, especially if movement was the problem. Should anything change, ring 0345 464 0079 or drop us an email.
Don’t keep resealing the same joint. Have someone find out why, or the next bead will go the same way.
Oad Street homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Homes close to Church of St Peter and St Paul include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them. For landlords with property near Newington station, botched sealant from a previous quick fix is easier to strip out between tenants. For site and facilities teams at buildings such as Borden Church of England Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Oad Street is about 3 miles south-west of Sittingbourne, in Kent. Jobs in Oad Street get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Oad Street is one of 922 towns and villages in Kent where we work. You can also see our page for Chelmsford, roughly 30 miles from Oad Street.
Jobs for remedial sealant in ME9 is quoted and booked the same way as anywhere else. Other places close to Oad Street include Danaway (1 mile north-west), Chestnut Street (1 mile north), Silver Street (1 mile south-east), Bredgar (1 mile south-east) and South Green (2 miles south-west). Larger places within reach include Maidstone (8 miles south-west), Ashford (15 miles south-east), Sittingbourne (3 miles north-east), Gravesend (15 miles north-west), Whitstable (15 miles east) and Faversham (9 miles east).
Near you in Oad Street
Locally, jobs take us to homes and businesses close to Plough & Harrow pub and Westlands School. For rail, the closest station is Newington station, about 1.9 miles north. A little further out are Court Hall Museum (2.7 miles north-east) and Bayford Court (2.9 miles east). Open spaces near Oad Street include Detling Hill.
How we quote for remedial sealant
You will get a clear quote before any work starts. It takes into account:
- Mould in or behind the old joints
- Access and height
- How much old sealant there is and how hard it is to remove
- Which sealant suits the joint
Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you are unsure, ring 0345 464 0079 or email us and we will give you an honest view and a quote.
Helping us quote
What to tell us when you ask for a quote:
- Pictures of the joints, sent by email
- Roughly how big the job is
- The problem you’ve noticed
- If it’s domestic, commercial or a hotel
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.
What we cannot put right
New sealant cannot fix everything, and we will tell you before work begins. Sealant will not put right:
- A bath, tray or worktop that moves until it’s properly fixed
- A leaking trap, valve or supply pipe
- Water damage behind tiles that needs a tiler
If you are not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Surfaces we seal
- Expansion joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Failed movement joints