Kent · England
Brabourne Bathroom Resealing
Bathroom resealing across Brabourne and nearby, with old sealant always removed completely and a 12-month guarantee.
- Gaps where the bath or tray has moved
- Leaking joints on a shower screen
- Leaks into the floor or ceiling below
Bathroom resealing in Brabourne, done properly
Showers work their sealant harder than baths. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. They’re resealed with anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. If you are dealing with a reseal done over the top of the old bead and gaps between the worktop and the wall, we can help, on kitchen worktops & upstands, basins & vanity units and sinks & splashbacks alike.
Somewhere as small as Brabourne, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Place
- Brabourne (TN25)
- Wider area
- Kent
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Your questions about bathroom resealing in Brabourne
Can you do bathroom resealing in Brabourne?
Yes. Our work covers London and the South East, and Brabourne is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job.
Will you come out to Brabourne?
Yes. Brabourne is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
What does bathroom resealing cost?
Size, access and the old material all affect the cost. Call for a quick quote.
How long does the new silicone need before I use the shower?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Keep water off it for around 24 hours, or as long as we advise for that product.
Can mouldy silicone be sorted out?
Yes. Mould inside the bead rarely cleans out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Do you do commercial work?
Yes. Hotels, offices and other businesses use us.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned before resealing.
Where is Mr Mastic based?
We’re a Crawley-based firm. We work across South East England, London and Scotland.
Aftercare tips
Simple care keeps the joints in good condition. Our advice:
- Run the extractor fan during and after every shower
- Dry the bead with a towel now and then
- Do not let bottles sit on the bead
- Wait for the cure time we give you
Treat the new bead gently when you clean: a mild bathroom cleaner and a soft cloth is enough. Avoid scouring pads and anything sharp, and a nicked bead lets mould in sooner.
Mould that starts as a few spots spreads through the bead. Once it’s deep in the silicone, cleaning usually won’t remove it. Catching it early keeps it a simple reseal.
Brabourne homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Westenhanger station change hands often, and fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. For an older house near a landmark such as Church of St Mary, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Brabourne is about 6 miles east of Ashford, in Kent. We provide bathroom resealing to homeowners, landlords and businesses in Brabourne, as part of our work across Kent. Brabourne is one of 922 towns and villages in Kent where we work. Our Chelmsford page covers work nearby (47 miles or so).
Here we cover the TN25 postcode area for bathroom resealing. Whether your property is on The Street and Canterbury Road or a nearby road, our applicators can take on the job. Close by, we work in Bircholt Forstal (1 mile west), Brabourne Lees (1 mile south-west), Lilyvale (1 mile south-west), Smeeth (2 miles south-west) and Ridgeway (2 miles south-west). Within a short drive, we also cover Ashford (6 miles west), Canterbury (11 miles north), Dover (13 miles east), Folkestone (8 miles south-east), Whitstable (15 miles north) and Faversham (13 miles north).
What’s near Brabourne
In Brabourne, that means homes and buildings near The Five Bells pub. For rail, the closest station is Westenhanger station, about 3.4 miles south-east of the centre. Other landmarks nearby include William Harvey Hospital (3.6 miles west) and Lympne Castle (4.6 miles south). Open spaces near Brabourne include Tolsford Hill and Hatch Park.
What happens on the day
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The work itself takes a morning or an afternoon for most single baths and showers, including the tidy-up. In a small place like Brabourne, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- We let it dry fully and fill the bath with water before sealing.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We tidy up and give you the cure time, generally around 24 hours.
Before we arrive
- Let us know if you’ve seen damp or leaks
- Tell us about any previous sealing or DIY attempts
- On commercial sites, let us know about site rules
Getting a quote
Need a quote? Please call 0345 464 0079 or drop us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Advice
Why deal with it now?
Tired sealant isn’t a reason to replace a bath or shower. A new bead often brings the whole room back, provided the bath, tray and tiles are in good order. If we find a deeper problem, you will hear it from us. Around Brabourne, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.
Why choose Mr Mastic in Brabourne
- Tidy, careful work
- We never seal over old sealant
- 4.9 on Google from 180+ five-star reviews
- Quality sealants from Arbo and Everbuild
See what affects the cost or our reviews.
Surface by surface
Kitchen worktops & upstands
Water behind a laminate worktop can make the edge swell. A continuous bead along the back keeps water out.
Basins & vanity units
A vanity top has a joint along the wall and sometimes at the sides. Water that gets behind can damage the unit, so a neat, continuous bead matters.
Landlord and commercial work in Brabourne
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Towns and villages near Brabourne
Also in Brabourne
Signs you need bathroom resealing in Brabourne
No sealant lasts indefinitely. Daily water, heat and cleaning products slowly wear it down, and how long it lasts comes down to use, cleaning and ventilation.
Any of these means the joints need attention:
- Shrunken sealant along the back of a worktop
- Water escaping at the shower enclosure
- Sealant that has split, shrunk or peeled away
- Damp behind the bath or under the tray
Schools such as Brabourne Church of England Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What your quote should include
- How long to leave it before use
- How long the guarantee is
- Whether VAT is included
- Is the old sealant removed completely?
When it is not the sealant
We won’t take on work that will not last, so here’s what sealant cannot put right:
- Water coming from the plumbing rather than the joint
- Cracks in the tray itself rather than the joint
- A bath or tray that moves because it is not properly supported
If you are not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.
Surfaces we seal
- Wet rooms
- Baths
- Sinks & splashbacks
- Kitchen worktops & upstands
- Shower trays & enclosures
- Basins & vanity units