Kent · England
Bathroom & kitchen resealing in Ash, Kent
Bathroom resealing for Ash and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Smears of silicone across the tiles
- New sealant laid over old sealant that is now lifting
- A bead that has pulled away from the tiles
How we handle bathroom resealing in Ash
Before a bath is sealed, it’s filled with water. A full bath sits slightly lower than an empty one, so the bead isn’t stretched the first time someone gets in. Quick jobs often leave it out, and it makes a real difference. If you have a messy, uneven bead from a previous reseal and a joint torn by a bath that flexes, we can put it right.
For a small place like Ash, bathroom resealing is planned like any other job: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
There’s a 12-month guarantee on every job.
- Location
- Ash (TN15, DA3)
- Wider area
- Kent
- Cover
- A year, on every job
- Quotes
- A clear price before we start
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Do you need bathroom resealing in Ash?
Sealant laid on a damp, dusty or greasy joint never bonds properly. Soap residue, oils and leftover silicone film all get in the way, so a rushed job can start to lift early.
The most common problems we see are:
- Leaks into the floor or ceiling below
- A joint torn by a bath that flexes
- Leaking joints on a shower screen
- Lumpy, uneven sealant from a DIY attempt
Letting a property close to Longfield station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Before you book anyone
- Whether they’re fully insured
- What happens if they find a problem under the old sealant
- Who does the work, and how experienced they are
- How long the guarantee is
DIY sealant or a professional job?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Nearby places to Ash
What else we do in Ash
Leave it or put it right?
Fresh sealant smartens a bathroom or kitchen with very little disruption, which matters if you’re letting a property or selling it. A smeared, uneven DIY bead does the opposite. Older cottages and farmhouses around Ash can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
What you pay reflects the work, not guesswork. That is why we ask about the job first and agree the price before starting.
Why book with us
- We are fully insured
- We leave the area clean and tidy
- Sanitary silicone with an anti-fungal additive in wet areas
- Domestic, commercial and hotel work
Read how sealant jobs are priced and our reviews.
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too in Ash and across Kent. We can quote a run of properties together, and we’re fully insured.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
What we do, step by step
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes a morning or an afternoon for most single baths and showers, depending on the amount of work. In a small place like Ash, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We cover the area around the joints we’re working on.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Before we arrive
- Let us know about stairs, lifts or work at height
- On commercial sites, let us know about site rules
- Keep children and pets away from the work area
Get a quote
We quote each job on its own, so the first step is telling us about yours. Simply call 0345 464 0079 or send us an email and describe the job and send pictures if you have them.
Related advice
Ash homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Schools such as New Ash Green Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. For an older house near a landmark such as Parish Church of Saint Peter and Saint Paul, walls and floors in older homes can move, and sealant and grout show it first.
Ash is about 6 miles south-west of Northfleet, in Kent. We carry out bathroom resealing for homes and businesses in Ash and the surrounding area, as part of our work across Kent. Ash is one of 922 places in Kent where we work for bathroom resealing. We also work in London, about 19 miles from Ash.
All of TN15 and DA3 is within our area for bathroom resealing. Local streets include Ash Road, The Street and Billet Hill, and we cover them all. If you are just outside Ash, we cover West Yoke (1 mile north), Fawkham Green (1 mile north-west), Speed Gate (1 mile north-west), Stansted (2 miles south) and West Kingsdown (2 miles south-west). Further out, we also cover Maidstone (12 miles south-east), Dartford (7 miles north-west), Sevenoaks (7 miles south-west), Royal Tunbridge Wells (15 miles south), Gravesend (6 miles north-east) and Tonbridge (11 miles south).
What’s near Ash
In Ash, that means homes and buildings near The White Swan Public House, among other places. Ash’s nearest station is Longfield station, roughly 2.8 miles north. A little further out are Darent Valley Hospital (5.6 miles north) and Eynsford Castle (3.6 miles west).
How to look after the new joints
How long the joints last depends on use and care. We suggest:
- Stick to a soft cloth and a mild cleaner
- Keep bottles off the sealant line
- Dry the bead with a towel now and then
- Open a window or run the fan so the room dries
Keep bottles and razors off the sealant line, as they hold water against it. A quick squeegee after showering keeps water from sitting on the joint.
Worktop joints fail quietly. Water gets behind the upstand and into the edge of a laminate worktop, and the board underneath can swell. Resealing before that happens protects the worktop.
FAQs for Ash
Do you cover smaller places like Ash?
Yes. Ash is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do bathroom resealing in Ash?
Yes, Ash is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or send us an email and tell us what needs doing.
Which products do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we will tell you what we’re using.
What colours of sealant can you use?
Most people choose white or clear, but other colours can be used to suit tiles and worktops. Let us know your preference when you ask for a quote.
Are you an approved applicator?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Should I try DIY first?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Is there any odour?
There can be a smell while the sealant cures, but it fades. Opening a window helps.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Loose or hollow tiles, or failed tanking behind them
- Cracked or missing grout between tiles (that is regrouting)
If in doubt, phone 0345 464 0079 or email us and we will say what we think.
Joints and surfaces we work on
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Sinks & splashbacks
- Kitchen worktops & upstands