Kent · England
Regrouting in Ash, Kent
Raking out old, cracked or stained grout and regrouting tiled walls and floors in Ash, with a 12-month guarantee on every job. Ask us for a quote.
- Floor grout that won’t come clean
- Grout stained black or orange that won’t clean
- Grout in corners that has cracked
About our regrouting in Ash
Grout is the filler between your tiles, while sealant goes where tiles meet a bath, tray or worktop. Once grout starts to crack or wash away, water can get in behind the tiles. Our job is to rake it out and put new grout in, then reseal the corners and edges. We’re often asked to deal with old grout in a dated colour and grout that’s cracking and breaking up, across wet rooms, bathroom wall tiles and tiled floors.
Being in a small place like Ash makes no difference to the job itself: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
A one-year guarantee comes as standard, so you’re covered after we’ve gone.
- Where
- Ash (TN15, DA3)
- Wider area
- Kent
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Why deal with it now?
Grouting over old grout rarely lasts. A thin skin on top tends to break off, taking any repair with it. Raking out to a consistent depth gives the new grout something to hold. In a small place like Ash, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Why Ash customers choose us
- Every job guaranteed for a year
- Quality sealants from Arbo and Everbuild
- Tidy, careful work
- Sanitary silicone with an anti-fungal additive in wet areas
Take a look at what affects the cost or customer reviews.
What sealant work can’t fix
In fairness, there are a few things sealant won’t fix:
- Loose tiles, which need refixing first
- Water coming from plumbing rather than grout
- Cracked or broken tiles
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think before booking.
Where we work in Ash
- Bathroom floors
- Shower walls
- Kitchen splashbacks
- Bathroom wall tiles
- Tiled floors
- Wet rooms
Ash homes and their sealant
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Longfield station, stained grout drags a rental down, and regrouting between lets puts that right. If you live in an older home near Parish Church of Saint Peter and Saint Paul, walls and floors in older homes can move, and sealant and grout show it first. For site and facilities teams at buildings such as New Ash Green Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Ash is about 6 miles south-west of Northfleet, in Kent. Across the TN15 area, we cover regrouting for homes and businesses. Our area takes in 922 places across Kent, large and small. There’s also a page for London, about 19 miles away.
Our applicators cover all of the TN15 and DA3 postcode area for regrouting. Whether your property is on Ash Road, The Street and Billet Hill or anywhere close by, we can help. Other places close to Ash include West Yoke (1 mile north), Fawkham Green (1 mile north-west), Speed Gate (1 mile north-west), Stansted (2 miles south) and West Kingsdown (2 miles south-west). Within a short drive, we also cover Maidstone (12 miles south-east), Dartford (7 miles north-west), Sevenoaks (7 miles south-west), Royal Tunbridge Wells (15 miles south), Gravesend (6 miles north-east) and Tonbridge (11 miles south).
Near you in Ash
In Ash, that means homes and buildings near The White Swan Public House, among other places. The closest station to Ash is Longfield station, about 2.8 miles north. Well-known places in the area include Darent Valley Hospital (5.6 miles north) and Eynsford Castle (3.6 miles west).
FAQs for Ash
Is Ash in your area for regrouting?
Yes. Our work covers London and the South East, and Ash is part of that. You can ring 0345 464 0079 or email us and let us know what needs doing.
Is Ash within the area you cover?
Yes, Ash is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you change the grout colour?
Yes, regrouting is the time to do it. Tell us the colour you’d like when you ask for a quote.
Is it worth trying it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Can you work on commercial sites?
Yes, regularly. We can plan bigger jobs in stages to suit the site.
Do you regrout part of a bathroom, like the shower?
Yes. A lot of our jobs are only the shower, or just the joints that have failed.
What information do you need?
Just the basics: where it is, what you’ve noticed and how we reach it. Then phone 0345 464 0079 or send us an email.
Landlords, agents and businesses in Ash
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
Landlords and letting agents in Ash can book us as well as householders. Sealant work between tenants keeps a property looking cared for before the next move-in.
Looking after it afterwards
A little care helps the new joints last. Our advice:
- Skip wire brushes and scourers
- Look at the sealant in the corners now and then
- Give the walls a quick rinse after use
- Clean grout with a mild bathroom cleaner
Leave the area unused for as long as we advise, so it cures fully. From then on, a quick rinse after showering helps and keep the room ventilated.
Tiles can come away if failed grout is left. Once that happens, regrouting won’t fix it so early action pays.
How the visit works
Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes anything from a few hours to a full day, depending on the area, and the area is left clean. Somewhere as small as Ash, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, we check for loose or hollow tiles and point out any we find.
- The old grout comes out to a consistent depth, without damaging the tiles.
- The joints are vacuumed and cleaned.
- New grout is worked into the joints and cleaned off the tile faces.
- We reseal the internal corners and edges with silicone.
Before we arrive
- Let us know about parking restrictions
- Move anything stored near the joints
- Mention any tricky access
Get a quote
Asking for a quote is easy: let us know the job and the location. Photos by email help us understand the job.
Advice
Other services in Ash
What affects the quote in Ash
Your quote is based on your job. We take into account:
- Mould in or behind the old joints
- Any working-time requirements on site
- The product the joint needs
- How easy the joints are to reach
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
What to tell us for a quote
To make quoting easier, let us know:
- Photos by email, if that’s easy
- How many joints, rooms or windows are involved
- Access, such as stairs, a lift or height
- What’s wrong with the joints now
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved and give you a clear quote.
DIY sealant or a professional job?
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so just mention it when you contact us.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.