Kent · England
Commercial & hotel sealant in Ash, Kent
Commercial sealant for Ash and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Washroom sealant that looks dirty however often it’s cleaned
- Sealant failing again soon after quick repairs
- Leaks from showers into rooms or ceilings below
Can I do it myself?
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Commercial sealant in Ash
We fit the work around your building. We can work room by room, floor by floor or in batches, and out-of-hours work or early starts can be arranged where it helps. We work on hotel bathrooms, rental portfolios and retail & leisure sites, and people most often call us about split sealant around staff kitchen worktops and sinks and leaking joints in shower rooms and changing areas.
If you have holiday lets, a converted barn used for business or a community building near Ash, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
There’s a 12-month guarantee on every job.
- Location
- Ash (TN15, DA3)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
When to call us in Ash
Plenty of commercial bathrooms have no window at all, so if the fan is weak, steam lingers and the sealant stays damp. That is when black mould sets into the bead.
It’s worth asking for a quote if you see:
- Repeated reseals that do not last
- Mouldy washroom sealant that staff and guests notice
- Split sealant where wet room floors meet walls
- Leaks from showers into rooms or ceilings below
If you look after a church, hall or community building such as Parish Church of Saint Peter and Saint Paul, any kitchen and washrooms need the same sealant care as any other building.
What to look for in a quote
- How hidden problems are handled
- How the joint is cleaned and prepared
- How much experience the applicator has
- Is the old sealant removed completely?
Your questions about commercial sealant in Ash
Will you come out to Ash?
Yes, Ash is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you cover Ash for commercial sealant?
Yes, Ash is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or send us an email and tell us what needs doing.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
How long does commercial sealant take?
A typical job takes anything from a few hours to several days, depending on the number of rooms. Your quote will say how long we expect yours to take.
Do you work for letting agents and landlords?
Yes. For several properties, we can plan the work as one programme, fitting around access to each property.
When can guests or staff use the shower again?
Around 24 hours is typical for sanitary silicone. Housekeeping get the cure time for each room.
Will you leave a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Do you hold any approvals?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Landlords, agents and businesses in Ash
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Commercial sealant around Ash
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you look after a building such as New Ash Green Primary School, busy washrooms and kitchens can be resealed in phases so they stay open. Rented homes near Longfield station change hands often, and sealant work can be quoted for a single flat or a whole portfolio.
Ash is about 6 miles south-west of Northfleet, in Kent. Jobs in Ash get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Ash is one of 922 places in Kent we cover for commercial sealant. You can also see our page for London, about 19 miles away.
Postcode districts we cover here for commercial sealant: TN15 and DA3. Local streets include Ash Road, The Street and Billet Hill, all of which we cover. Close by, we work in West Yoke (1 mile north), Fawkham Green (1 mile north-west), Speed Gate (1 mile north-west), Stansted (2 miles south) and West Kingsdown (2 miles south-west). Within a short drive, we also cover Maidstone (12 miles south-east), Dartford (7 miles north-west), Sevenoaks (7 miles south-west), Royal Tunbridge Wells (15 miles south), Gravesend (6 miles north-east) and Tonbridge (11 miles south).
Near you in Ash
Typical jobs here are in homes near The White Swan Public House. For rail, the closest station is Longfield station, about 2.8 miles north of the centre. Other landmarks nearby include Darent Valley Hospital (5.6 miles north) and Eynsford Castle (3.6 miles west).
How the job changes by surface
Welfare facilities
Welfare facilities, shower rooms and changing areas need to stay usable. We can plan the work in sections.
Retail & leisure sites
Changing areas and showers at leisure sites are wet all day, so anti-fungal sanitary silicone is the product we use.
What sealant work can’t fix
A few problems are outside what sealant work can do:
- Tiles coming off the wall
- Poor ventilation that keeps bringing mould back
- Assessing what fire stopping a building needs
If you are not sure, just call 0345 464 0079 or email us and we will give you a straight answer.
What we seal
- Rental portfolios
- Student & care accommodation
- Hotel bathrooms
- Welfare facilities
- Retail & leisure sites
- Office washrooms & kitchens
More services for Ash
Aftercare tips
No joint lasts for ever, but care makes a real difference. A few tips:
- Schedule work around occupancy
- Keep extractor fans working and serviced
- Give housekeeping the cure time for every room
- Use mild cleaners on sealant, not bleach or abrasives
Each room is handed back with its cure time, generally around 24 hours. Pass it on to housekeeping or cleaners so the new sealant is not wetted or scrubbed too soon.
Planned resealing is easier to manage than emergency repairs. Rooms can be scheduled around occupancy and staff, rather than closed at short notice.
What we do, step by step
At the end, we look at the finished work together and explain the cure time. The work normally takes anything from a few hours to several days, depending on the number of rooms, depending on how much there is to do. Somewhere as small as Ash, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We walk the site with you and agree the rooms, the order and the hours.
- Every area is sheeted and the old silicone stripped out.
- Joints are cleaned, treated for mould and dried.
- New sealant suited to each area is applied and tooled.
- We check every room and give its cure time for housekeeping.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Keep children and pets away from the work area
- Mention any sign-in or site rules at work premises
Getting a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you are ready, ring 0345 464 0079 or drop us an email.