Kent · England

Regrouting in Maplescombe, Kent

Regrouting in Maplescombe from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Grout washed out of a shower
  • Kitchen splashback grout stained by grease
  • Floor grout that won’t come clean

Regrouting in Maplescombe

Regrouting in Maplescombe

Regrouting is normally paired with resealing. Grout is for the joints between tiles, but corners and edges move, so they’re sealed with silicone rather than grout. Renewing both together means nothing is left half-done. We work on bathroom wall tiles, tiled floors and bathroom floors, and the jobs we see most are grout that makes sound tiles look old and corners filled with grout instead of silicone.

Around Maplescombe, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.

Each job carries a 12-month guarantee, large or small.

Sealant gun being used along the bath-to-tile joint in a beige tiled bathroom
Place
Maplescombe (DA4)
Region
Kent
Guarantee
12 months on all our work
Price
Quoted before any work starts
Telephone
0345 464 0079
Page updated
26 October 2026

Surface by surface

Corners and edges

We reseal edges at the same time as regrouting, so the whole area is finished together.

Shower walls

Showers put more water on grout than anywhere else. We replace it and renew the silicone at the edges.

How we quote for regrouting

There’s no set price list, because jobs vary so much. What we look at:

  • How much old sealant there is and how hard it is to remove
  • The product the joint needs
  • Any working-time requirements on site
  • The number of rooms or windows

The cost depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before work begins.

Helping us quote

Photos by email are helpful but not essential. Try to tell us:

  • The problem you’ve noticed
  • The type of property
  • Photos by email, if that’s easy
  • Any previous sealing or DIY work

For a quote, phone 0345 464 0079 or drop us an email with the location and a short description of the problem. We will give you a clear price before any work starts.

Aftercare tips

Good habits help new joints last longer. A few tips:

  • Keep the fan on after showering
  • Don’t use strong acidic cleaners on grout
  • Stick to mild products for cleaning grout
  • Check the corner silicone every few months

Give the new grout the time we tell you before using the shower, so it can harden properly. From then on, a quick rinse after showering helps and let the room air.

Stains that will not clean are a sign the grout is breaking down. Regrouting at this stage is straightforward, before the joints open up.

Maplescombe homes and their sealant

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.

In and around Maplescombe, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.

Maplescombe is about 6 miles north-east of Sevenoaks, in Kent. For regrouting in and around Maplescombe, it’s easy to get a quote: please phone 0345 464 0079 or drop us an email. We cover Kent from our Crawley base, Maplescombe included. Maplescombe is one of 922 places in Kent where we work for regrouting. You can also see our page for London, roughly 18 miles from Maplescombe.

Postcode districts we cover here for regrouting: DA4. We also cover West Kingsdown (1 mile south-east), East Hill (1 mile south), Eynsford (1 mile north-west), Knatts Valley (2 miles south) and Speed Gate (2 miles north-east). We also work in nearby towns such as Maidstone (14 miles south-east), Dartford (6 miles north), Sevenoaks (6 miles south-west), Royal Tunbridge Wells (15 miles south), Gravesend (8 miles north-east) and Tonbridge (11 miles south).

What’s near Maplescombe

For rail, the closest station is Eynsford station, roughly 1.6 miles west of the centre. Other landmarks nearby include Eynsford Castle (1.5 miles north-west) and Sevenoaks Hospital (5 miles south-west).

Map of Maplescombe © OpenStreetMap contributors

Maplescombe: your questions answered

I let a flat near Eynsford station. Can you help?

Yes, we work for landlords and agents. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before work begins.

Do you cover smaller places like Maplescombe?

Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.

Is it worth trying it myself?

Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.

Will the old sealant be removed?

Yes. Sealing over old sealant is the main reason resealing fails early, so we never do it.

Will regrouting fix loose tiles?

Regrouting won’t fix loose tiles. We flag any loose or hollow tiles before starting, so you can decide what to do.

How long does the job take?

That depends on the amount of work, but as a guide it takes anything from a few hours to a full day, depending on the area. We’ll tell you when we quote.

Are you an approved applicator?

Yes. Mr Mastic is an ARBOMaster approved applicator and we’re fully insured too.

Are you insured?

Yes. We’re fully insured, with over 20 years’ experience in sealant work.

Should I try it myself first?

If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.

A DIY attempt does not rule out a professional job. We remove it and do the joint properly.

Why act early in Maplescombe

Once grout cracks, water can get behind the tiling. Left alone, that water can loosen tiles or damage the wall, which turns a regrout into a retile. Dealing with it now keeps it small. Older cottages and farmhouses around Maplescombe can have timber floors and frames, where water from a failed joint can cause rot if it’s left.

There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please call 0345 464 0079 or drop us an email and we’ll talk you through it.

Why choose Mr Mastic in Maplescombe

  • Over 20 years’ experience
  • We leave the area clean and tidy
  • Approved under the ARBOMaster scheme
  • Anti-fungal silicone where joints get wet

Read how sealant jobs are priced or our reviews.

What we are called out for in Maplescombe

Grout used in corners or along the bath cracks as the bath or tray moves. They need flexible sealant, and if they’re grouted, a crack soon lets water in.

Look out for any of the following:

  • Grout that is cracking and breaking up
  • Kitchen splashback grout stained by grease
  • Grout stained black or orange that won’t clean
  • Grout washed out of a shower

If you let a flat or house near Eynsford station, a regrout while the flat is empty is quicker than working around a tenant.

Questions to ask before you book

  • How long to leave it before use
  • What happens if the job turns out different
  • Whether the sealant suits the joint
  • Whether all the old sealant comes out first

10 questions to ask before you book

The process

Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes anything from a few hours to a full day, depending on the area, and the area is left clean. For a village or hamlet like Maplescombe, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. We start by checking the tiles for any that are loose or hollow.
  2. We rake out the old grout to an even depth, taking care of the tile edges.
  3. Dust and debris are vacuumed out of every joint.
  4. New grout is worked into the joints and cleaned off the tile faces.
  5. Corners and edges are resealed with flexible silicone, not grout.

How to prepare

  • Keep pets and children clear of the area while we work
  • Mention any leaks or damp you’ve noticed
  • On commercial sites, let us know about site rules

How to get a quote

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.

Get a price

Related advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job