Kent · England
Regrouting in Eynsford, Kent
We cover Eynsford for raking out old, cracked or stained grout and regrouting tiled walls and floors. Old sealant removed completely, joints prepared properly.
- Dirty, worn grout on a tiled floor
- Gaps where the shower grout has gone
- Grout that stays dark however much it’s cleaned
Regrouting in Eynsford
Regrouting is normally paired with resealing. Grout is for the joints between tiles, but corners and edges move, so they need flexible silicone instead. Renewing both together means nothing is left half-done. If you are dealing with dirty, worn grout on a tiled floor and corners filled with grout instead of silicone, we can put it right, on kitchen splashbacks, bathroom floors and shower walls alike.
Around Eynsford, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Place
- Eynsford (DA4)
- Wider area
- Kent
- Cover
- A year, on every job
- Quotes
- A clear price before we start
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Why act early in Eynsford
Bleach can lighten stained grout for a while, but mould that has got into grout generally comes back. Replacing the grout and resealing the edges is a lasting fix. Older cottages and farmhouses around Eynsford can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Leaving a failed joint normally makes the job bigger, not smaller, because water and mould keep working on it. If you’re not sure whether it needs doing, call 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
Why choose Mr Mastic in Eynsford
- Anti-fungal silicone where joints get wet
- 4.9 on Google from 180+ five-star reviews
- More than 20 years in sealant work
- Neat joints and a tidy finish
Read what affects the cost or our reviews.
Common questions in Eynsford
Do you work for landlords with property near Eynsford station?
Yes, we work for letting agents and landlords. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we’ll send you a clear quote.
Do you work in hotels near Eynsford?
Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.
Can new sealant go over the old?
No, it will not last. It may look fine at first, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Can you regrout just the shower?
Yes, that’s common. The shower normally fails first, so many people regrout just that part.
Can I add another job to the visit?
Yes, we can. More than one area can be quoted together.
What information do you need?
The location, the problem and the rough size of the job. If you can, email a few photos.
Will there be a smell?
Sometimes, a little. It fades as the sealant cures, and ventilation helps.
How long does the job take?
Most jobs take anything from a few hours to a full day, depending on the area, including preparation and clearing up. We will confirm how long when we quote.
Aftercare tips
Once the sealant has cured, a few habits help it last:
- Clean with a soft brush, not anything metal
- Wipe water off the walls when you are done
- Do not use strong acidic cleaners on grout
- Keep an eye on the silicone along the edges
Give the new grout the time we tell you before using the shower, so it can harden properly. After that, rinse the tiles after showering and let the room air.
Once grout cracks, it tends to get worse. Water gets in behind and the tiles can start to loosen and early regrouting can avoid a much bigger job.
Different surfaces, different methods
Bathroom wall tiles
Tiles away from the shower stay drier but still stain and crack. Regrouting brings them back in line.
Corners and edges
Corners flex as the building moves, so we seal them rather than grout them.
Can I do it myself?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
What happens on the day
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, do the work and clear up. Most jobs take a few hours for a shower enclosure, longer for a whole room. For a village or hamlet like Eynsford, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We agree the area to be regrouted and point out any loose tiles.
- Grout is raked out without chipping the tiles.
- Dust is cleared from every joint.
- The new grout goes in, then the tile faces are cleaned.
- We renew the silicone at the corners and edges.
Getting ready for the visit
- Mention if the joints have been sealed before
- Clear the area around the work
- For indoor joints, keep the area dry beforehand if you can
Get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you are ready, call 0345 464 0079 or email us.
Read more
Do you need regrouting in Eynsford?
Poor ventilation keeps grout damp, and damp grout is where mould grows. Black marks that come back after cleaning are often in the grout itself.
Look out for these signs:
- Cracked grout along the bath or tray
- Gaps where the shower grout has gone
- Grout that’s cracking and breaking up
- Old grout in a dated colour
Schools such as The Anthony Roper Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Before booking anyone
- What preparation is included
- Whether they seal over old material or remove it
- Whether you can choose the colour
- How hidden problems are handled
What affects the cost of regrouting
We don’t publish a price list. What we look at:
- Whether old sealant or filler has to be cut out
- The number and length of the joints
- The type of sealant required
- How easy the joints are to reach
What you pay reflects the work, not guesswork. That is why we ask about the job first and agree the price before starting.
What we need to know
Photos help, but a description is a good start. Try to tell us:
- What’s wrong with the joints now
- Photos by email, if that’s easy
- Any access issues, like height or stairs
- The rough size of the job
To get a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
More services for Eynsford
Regrouting around Eynsford
There are hotels and other places to stay in and around Eynsford. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as Church of Saint Martin, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. If you let a flat or house near Eynsford station, a regrout while the flat is empty is quicker than working around a tenant.
Eynsford is about 5 miles east of Orpington, in Kent. Wherever you are in the DA4 postcode area, we can carry out regrouting at your property. 922 places in Kent are on our list, from the larger towns to small villages. There’s also a page for London, about 16 miles away.
Here we cover the DA4 postcode area for regrouting. You’ll find streets such as Station Road, High Street and Edwards Court, all of which we cover. We also cover the places around Eynsford: Farningham (1 mile north-east), Maplescombe (1 mile south-east), Horton Kirby (2 miles north-east), East Hill (2 miles south-east) and Speed Gate (2 miles east). We also work in nearby towns such as Maidstone (15 miles south-east), Dartford (5 miles north), Sevenoaks (6 miles south), Gravesend (8 miles north-east), Tonbridge (12 miles south) and Northfleet (7 miles north-east).
Local landmarks in Eynsford
Typical jobs here are in homes near The Malt Shovel pub and the streets around them. The closest station to Eynsford is Eynsford station, about 0.5 miles south-west. A little further out are Eynsford Castle (less than half a mile north) and Darenth Park Hospital (5.1 miles north-east). The countryside around Eynsford includes The Warren.