Isle of Wight · England
Nettlestone Window Mastic
Window mastic for Nettlestone and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Rushed sealant from a window installation
- Sealant in the wrong colour for the frame
- Draughty joints inside around the window
About our window mastic in Nettlestone
Over two decades of sealing frames has taught us which products suit which walls. We’re ARBOMaster approved and fully insured, and every job is covered by a 12-month guarantee. If you’re dealing with rushed sealant from a window installation and water coming in at the bottom corners of a door, we can put it right, whatever the surface.
Somewhere as small as Nettlestone, older homes often have timber frames set in stone or brickwork. Not every older frame suits a modern silicone bead, so the sealant has to be chosen to suit the building.
A one-year guarantee comes as standard.
- Place
- Nettlestone (PO34)
- Region
- Isle of Wight
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
What window mastic looks like in Nettlestone
Nettlestone is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on the mastic around window and door frames, which can dry out and crack sooner where a building faces the weather. Historic houses like Nunwell House (about 2.8 miles south-west) are a reminder that the area around Nettlestone has older buildings as well as new. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window.
For landlords with property near Smallbrook Junction station, sound mastic around windows and doors keeps out the draughts and damp that tenants notice first. Managing a site like Nettlestone Primary School? Then the mastic around its windows and doors needs looking after like any other building’s.
Nettlestone is about 2 miles east of Ryde, in the Isle of Wight. Wherever you are in the PO34 postcode area, our applicators can take on window mastic. Our the Isle of Wight coverage runs to 125 places, and Nettlestone is one of them. You can also see our page for Portsmouth, roughly 7 miles from Nettlestone.
We work across PO34 for window mastic and the streets around it. That includes homes and businesses on Caws Avenue, Willowtree Drive and Ashtree Way and the roads around them. Nettlestone sits on or near the B3340, so getting to you is simple. Close by, we work in Seaview (1 mile north), Pondwell (1 mile north-west), Spring Vale (1 mile north-west), Puckpool (1 mile north-west) and Westridge (1 mile west). Larger places within reach include Newport (8 miles west), Cowes (9 miles west), Sandown (5 miles south-west), Shanklin (6 miles south-west), Ventnor (9 miles south-west) and East Cowes (8 miles west). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Landmarks near Nettlestone
In Nettlestone, that means homes and buildings near The Vine Inn and the streets around them. The closest station to Nettlestone is Smallbrook Junction station, about 1.8 miles west of the centre. A little further out are Sandown Castle (4.1 miles south) and Cothey Bottom Heritage Centre (1.2 miles west). The countryside around Nettlestone includes Alan Hersey Nature Reserve and Bembridge Down.
For landlords and businesses
If you manage several properties in or around Nettlestone, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and photos by email help.
Failed sealant is one of the commonest items on a check-out report. Several properties can be quoted together.
Nettlestone questions
Does living near the coast affect window mastic in Nettlestone?
Coastal homes put outside sealant through more weather than inland ones, so the choice of sealant and the preparation matter even more. It’s worth checking the walls that face the sea first.
Will you come out to Nettlestone?
Yes. Nettlestone is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords and businesses?
Yes. We work for householders, landlords, letting agents, businesses and hotels across the Isle of Wight.
How long should I leave it?
It depends on the product and the conditions. Before we leave, we will tell you the cure time.
Should I try DIY first?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
Can you reach windows above the ground floor?
Yes, in most cases. Access is planned before we start, so mention the height and anything in the way.
How do I get a quote for window mastic in Nettlestone?
Every job is different, so each one gets its own quote. To get one, call 0345 464 0079 or send us an email and tell us what needs doing and where.
Can I add another job to the visit?
Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Make sure the drainage slots aren’t blocked
- Avoid harsh chemicals near the mastic
- Wash the frames with mild soapy water
- Avoid blasting the frames with a pressure washer
On timber frames, keep the paintwork in good order, because bare, wet timber moves more and pulls at the joint. Paint up to the joint, not over the silicone.
Wet, windy weather is when failed mastic shows itself, but resealing works best in dry conditions. Sorting cracked mastic early means the joint is sound before the bad weather.
How the visit works
We keep the work tidy and contained to the joints we are treating. Expect the work to take a few hours for a handful of frames, longer for a whole house. For a village or hamlet like Nettlestone, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We check each frame and agree which ones need doing.
- Next the failed sealant is cut away and the joint cleaned.
- Where gaps are deep, backing rod goes in first.
- A flexible, weatherproof sealant is applied in a colour to suit the frame.
- Every joint is checked before we leave.
Getting ready for the visit
- Tell us about any previous sealing or DIY attempts
- Plan for the work area to be out of bounds to pets and children
- On commercial sites, let us know about site rules
How to get a quote
There’s no standard price list, because every job is different. Instead, we give you a clear quote for your job. To get started, ring 0345 464 0079 or drop us an email.
Read more
What sealant work can’t fix
We will not take on work that won’t last, so here’s what sealant cannot put right:
- Damp coming through the wall itself rather than the frame joint
- Rotten timber, which needs a joiner first
- Misting between the panes of a double-glazed unit (that needs a new unit)
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think.
Surfaces we seal
- uPVC windows
- Aluminium frames
- Patio & French doors
- Window sills
- Timber windows & doors
- Composite doors
What happens if it’s left?
Redecorating is a good moment to renew the mastic. Fresh joints finish the job neatly, and it’s easier while the walls are being worked on anyway. Where a wall is exposed, as many are in small places like Nettlestone, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
The cost reflects the work involved, not guesswork. That is why we ask about the job first.
Why choose Mr Mastic in Nettlestone
- 4.9 on Google from 180+ five-star reviews
- Colour agreed with you before any work starts
- 20+ years of sealant experience
- Approved under the ARBOMaster scheme
See our cost guide or our reviews.
Other services in Nettlestone
Common problems we fix in Nettlestone
Some failures date back to when the windows were fitted. Mastic laid onto dusty, damp or crumbling surfaces never bonded as it should, so it comes away long before its time.
Most people get in touch after spotting one of these:
- Mastic that has split away from the wall
- Draughty joints inside around the window
- Draughts coming in around windows and doors
- Water coming in at the bottom corners of a door
If you live in an older home near St. Helen's Church, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.
What to look for in a quote
- Are they insured?
- Which colour the sealant will be
- Whether the sealant suits the joint
- What the quote includes, VAT included or not
Should I try it myself first?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.