Highland · Scotland
Window & door mastic in Morar, Highland
Window mastic for Morar and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Gaps where the sill meets the wall
- White mastic on grey or black frames
- Draughts coming in around windows and doors
Why deal with it now?
Choosing the product is half the job. Interior caulk and bathroom silicone are not made for exterior frame joints. A low-modulus exterior sealant keeps its stretch through hot and cold weather. In an older home around Morar, damp from a failed joint can get into timber and plaster.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part.
Why Morar clients choose us
- Experience in homes, commercial sites and hotels
- Tidy, careful work
- Trusted Arbo and Everbuild sealants
- A choice of colours where the product allows
See how sealant jobs are priced and our reviews.
Window mastic in Morar, done properly
Colour matters on a frame. We can seal in white, brown, anthracite grey, black or clear, so the bead blends with the window rather than framing it. Typical jobs include sealant in the wrong colour for the frame and mastic that’s falling out in pieces, across timber windows & doors, uPVC windows and aluminium frames.
Mastic can only go onto a dry joint, so outside work in Morar depends on the weather. Tell us about access to all the windows and doors, upstairs included.
There’s a 12-month guarantee on every job, large or small.
- Location
- Morar (PH40)
- Region
- Highland
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
The process
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes anything from an hour or two to a full day, depending on how many frames there are. Somewhere like Morar may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We start by checking each window and door with you.
- The old mastic is cut out and the surfaces cleaned back.
- Deep gaps are filled with backing rod to set the depth.
- New exterior sealant goes on in a matching colour and is tooled smooth.
- Finally we tidy up and check each joint.
Before we arrive
- Mention any tricky access
- Mention any sign-in or site rules at work premises
- Tell us if parking is tricky
Ask for a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. When it suits you, send an email to info@mrmastic.co.uk.
Related advice
Should I try it myself first?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Frames and glazing around Morar
Morar is within about 2 miles of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on the mastic around window and door frames, especially on the side facing the sea. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and failed outside joints work against that.
Rented homes near Morar station change hands often, and cracked frame mastic tends to show up as a draught or damp complaint, so it’s worth checking between lets. Homes close to Roman Catholic Church Of St Cumin And Presbytery include some older properties, and the joint between an old wall and a newer frame is generally the first place rain gets in.
Morar is in Highland. Jobs in Morar get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Across Highland, we cover 253 places, and Morar is one of them.
All of PH40 is covered for window mastic, from the main roads to the quietest streets. Window mastic is available to properties on Rhubana View and Columba Road. Nearby, we also carry out window mastic in Glenancross (1 mile south-west), Mallaig (2 miles north), Arisaig (4 miles south), Ardvasar (7 miles north-west) and Armadale (7 miles north-west). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Landmarks near Morar
Morar has its own railway station: Morar station. Well-known places in the area include Mallaig Heritage Centre (2.5 miles north). For a walk, there’s Loch a' Ghille Ghobaich.
What sealant work can’t fix
In fairness, some problems need a different trade:
- Damp coming through the wall itself rather than the frame joint
- Worn gaskets, brush seals or a door that has dropped
- Broken hinges, locks or handles
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think.
Surfaces we seal
- Composite doors
- Timber windows & doors
- Patio & French doors
- uPVC windows
- Window sills
- Aluminium frames
What affects the cost of window mastic
Call for a quick quote. What matters most is:
- How many rooms, windows or areas are involved
- Whether the work is at height
- Whether there’s mould to deal with
- The size of the job
The cost reflects the work involved, not guesswork. That’s why we ask a few questions first and send you a clear quote before work begins.
Asking for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- What’s wrong with the joints now
- Roughly how big the job is
- Access, such as stairs, a lift or height
- Where the job is, and your postcode
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll explain what’s involved.
How the job changes by surface
Composite doors
An exposed front door gets wind-driven rain, and the top and bottom corners tend to fail first. Those corners get the most care.
Timber windows & doors
Soft or rotten wood can’t be sealed successfully. If we find rot, we’ll tell you before going ahead, as a joiner will need to deal with it.
What we’re called out for in Morar
Joint shape matters as much as the product. A skim of sealant over a wide gap soon tears, while a joint packed solid cannot stretch. That’s what backing rod is for.
These are the problems we are asked about most:
- Sealant in the wrong colour for the frame
- Gaps between the frame and the inside reveal
- Gaps left after new windows were fitted
- Old mastic that has gone black or come away
Schools such as Mallaig High School are buildings too, and the mastic around its windows and doors needs looking after like any other building’s.
What to look for in a quote
- What the cure time is
- Is the old sealant removed completely?
- How the surfaces are prepared before sealing
- Are they insured?
Common questions in Morar
Do you work for landlords with property near Morar station?
Yes. We work for landlords and agents as well as householders, and several properties can go on one quote. Just drop us a line at info@mrmastic.co.uk with the address and what needs doing, and we will give you a clear quote.
Will you come out to Morar?
Yes, we do. Our work covers the whole of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
What should I tell you?
Only a few details: the address or postcode, what’s wrong and any access issues. After that, simply send an email to info@mrmastic.co.uk.
Do you guarantee window mastic?
Yes. All our work carries a 12-month guarantee, and we’re ARBOMaster approved applicators.
How long should I leave it?
Most sealants are touch-dry well before they’re fully cured. We’ll give you the cure time for the product we used.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected.
Do you seal inside as well as outside?
Yes. Outside is the weather seal; inside closes the gap to the plaster. We do one or both.
Do you work for hotels and businesses?
Yes. Larger jobs can be planned room by room or area by area.