West Lothian · Scotland
Window Mastic in Longridge
Window mastic across Longridge and nearby, with old sealant always removed completely.
- Old mastic that has gone black or come away
- A bead that does not match the frame
- Cracked sealant at the sill ends
About our window mastic in Longridge
Frames and walls do not move together. Plastic and aluminium frames move with the temperature, while masonry stays fairly still. So the sealant has to stretch and recover, which is why we use a low-modulus product. We work on patio & French doors, window sills and timber windows & doors, and the jobs we see most are draughts coming in around windows and doors and rain getting in at the frame or under the sill.
In and around a place like Longridge, homes range from older stone-built cottages to newer houses. Wind-driven rain finds any gap around a frame or sill.
You are covered for a year from the day we finish. If there’s a problem with it, please drop us a line at info@mrmastic.co.uk.
- Where
- Longridge (EH47)
- Wider area
- West Lothian
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
When it isn’t the sealant
We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:
- A door that needs adjusting, rehanging or new seals
- Damp problems in the wall away from the window
- A failed sealed unit that has misted up
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly before booking.
Where we work in Longridge
- Patio & French doors
- Composite doors
- Aluminium frames
- Window sills
- uPVC windows
- Timber windows & doors
Windows and doors in Longridge
Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and failed outside joints work against that. Many older homes in Scotland have sash and case windows, and the joint between the box frame and the stone or render is traditionally pointed with sand mastic.
For landlords with property near Breich station, sound mastic around windows and doors keeps out the draughts and damp that tenants notice first.
Longridge is about 4 miles south of Bathgate, in West Lothian. Whether you’re in the middle of Longridge or further out, window mastic is available for homes and businesses alike. Longridge is one of 58 towns and villages in West Lothian where we work. There’s also a page for Edinburgh, about 20 miles away.
We cover every part of the EH47 postcode area for window mastic and the streets around it. You will find streets such as Main Street, Kirk Brae and School Road. Other places close to Longridge include Breich (1 mile south-east), Whitburn (1 mile north), Bents (1 mile east), East Whitburn (2 miles north-east) and Stoneyburn (2 miles east). Further out, we also cover Livingston (7 miles north-east), Bathgate (4 miles north), Linlithgow (10 miles north), East Calder (9 miles north-east), Broxburn (10 miles north-east) and Armadale (4 miles north).
Near you in Longridge
For rail, the closest station is Breich station, roughly 1.2 miles south of the centre. Well-known places in the area include Bathgate Castle (3.9 miles north-east) and Whitburn Community Museum (1.6 miles north).
How we quote for window mastic
We quote each job individually. This is what makes a difference:
- Whether old sealant or filler has to be cut out
- The size of the job
- Whether there’s mould to deal with
- The type of sealant required
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
Asking for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- A few photos by email, if you can
- Roughly how big the job is
- Whether it has been sealed before
- Where the job is, and your postcode
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. When it suits you, send an email to info@mrmastic.co.uk.
When to call us in Longridge
On timber frames, paint and putty build up around the joint. Old mastic gets painted over and cracks under the paint, and the wood moves with damp as well as heat.
The most common problems we see are:
- Old mastic that has gone black or come away
- A bead that doesn’t match the frame
- Untidy mastic left by window fitters
- Gaps between the frame and the inside reveal
In and around Longridge, as anywhere, good window mastic starts with a clean, dry, properly prepared joint.
Before you book anyone
- What preparation is included
- What happens if they find a problem under the old sealant
- How long to leave it before use
- What product goes in the joint
Also near Longridge
Also in Longridge
How to look after the new joints
A little care helps the new joints last. Our advice:
- Clear any debris from frame drain holes
- Check the mastic once a year
- Don’t paint over the silicone
- Do not aim a pressure washer at the joints
Silicone cannot normally be painted, so if you are planning to paint the frames or walls, tell us beforehand. We can use a paintable sealant where that matters.
On timber windows, water behind the joint can lead to rot. Once wood has rotted, it needs repair before it can be sealed, so early resealing is worth it.
Why act early in Longridge
If you’re painting or rendering, reseal at the same time. A clean new bead makes new paint or render look finished, and it’s easier while the walls are being worked on anyway. In an older home around Longridge, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.
What you pay reflects the work, not guesswork. That’s why we ask about the job first and send you a clear quote before any work starts.
Why us?
- You choose the colour before work begins
- 4.9 on Google from 180+ five-star reviews
- Any old sealant cut out fully, not covered over
- Neat joints and a tidy finish
See our cost guide or our reviews.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
How the visit works
You do not need to clear the whole room or building, just the space around the work. We protect the rest, and the job takes a few hours for a handful of frames, longer for a whole house in most cases. Somewhere like Longridge may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We check how each frame can be reached safely.
- All the failed sealant is cut away, along with any loose debris.
- Frame and wall are cleaned and must be dry before sealing, and primed where the sealant calls for it.
- Deep voids are backed, then the sealant is gunned in.
- We tool the joint so water runs off, then clear up.
Getting ready for the visit
- Tell us if parking is tricky
- Keep pets and children clear of the area while we work
- Tell us about any water getting in
Get a quote
Asking for a quote is easy: tell us what needs doing and where and its rough size. A few pictures by email make the job easier to understand.
Read more
Your questions about window mastic in Longridge
Will you come out to Longridge?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Do you cover Longridge for window mastic?
Yes. We work across all of Scotland, and Longridge is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job, and we will give you a clear price.
How do I get a quote for window mastic in Longridge?
Size, access and the old material all affect the cost. Ask us for a quote.
How long will my window job take?
A handful of frames is a short visit, while a whole house takes longer. You’ll get a timescale with the quote.
Can you match the sealant to my frames?
Yes, in most cases. Mention the frame colour when you ask for a quote and we will use the nearest match.
Do the sealants smell?
It depends on the product. Some products have a noticeable smell, others very little.
Do I have to be there?
Access is agreed with you when the job is booked. Indoors, that usually means someone at home.
When is the sealant fully cured?
That depends on the sealant used, so follow the cure time we give you.