Windsor and Maidenhead · England
Window & door mastic in Eton Wick, Windsor and Maidenhead
Mastic around window and door frames, sills and patio doors for Eton Wick, backed by a 12-month guarantee. Call for a quick quote.
- White mastic on grey or black frames
- Rain getting in at the frame or under the sill
- Gaps between the frame and the inside reveal
What we can’t put right
New sealant cannot fix everything, and we’d rather say so up front. It won’t solve:
- Rotten timber, which needs a joiner first
- Faulty window hardware
- A door that needs adjusting, rehanging or new seals
Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly before you book.
Surfaces we seal
- Patio & French doors
- Aluminium frames
- Timber windows & doors
- Composite doors
- uPVC windows
- Window sills
Window mastic in Eton Wick
There are two joints on most windows. The external joint is the weather seal; inside, the joint between frame and plaster stops draughts and tidies the reveal. Either or both can be done. If you have black, perished sealant on frames and cold air getting in at the frame edge, we can help.
In a village or hamlet like Eton Wick, older cottages and farmhouses often have timber windows set in stone or brick. Not every older frame suits a modern silicone bead, so the sealant has to be chosen to suit the building.
You are covered for a year from the day we finish. If anything is not right with it, ring 0345 464 0079 or email us.
- Place
- Eton Wick (SL4)
- Wider area
- Windsor and Maidenhead
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
The process
All our tools and materials come with us in the van, so you don’t need to buy or prepare anything. After a quick look at the joints together, the area is protected and the work begins. It normally takes a few hours for a few frames, or a day or more for a whole house. Somewhere as small as Eton Wick, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we look at every frame and agree the list.
- Next the failed sealant is cut away and the joint cleaned.
- Where gaps are deep, backing rod goes in first.
- New exterior sealant goes on in a matching colour and is tooled smooth.
- We clear up and check every joint is fully closed.
How to prepare
- For business premises, tell us about site rules or sign-in
- Mention any leaks or damp you’ve noticed
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
There’s no standard price list, because every job is different. Instead, we send you a clear quote for your job. To get started, call 0345 464 0079 or drop us an email.
Read more
When to call us in Eton Wick
Older frames were often sealed with products that set hard. Once it has hardened, the frame’s movement tears it from the wall, and a gap opens along one edge.
Common reasons people contact us include:
- Water coming in at the bottom corners of a door
- Gaps between the frame and the inside reveal
- Draughts coming in around windows and doors
- Hard, cracked sealant around windows
If you let a flat or house near Windsor & Eton Central station, cracked frame mastic tends to show up as a draught or damp complaint, so it’s worth checking between lets.
Comparing quotes
- Whether VAT is included
- What happens if the job turns out different
- How the joint is cleaned and prepared
- How the colour is chosen
What affects the quote in Eton Wick
You’ll get a clear quote before we start. It takes into account:
- The product the joint needs
- Mould in or behind the old joints
- How easy the joints are to reach
- The amount of work
Doing several joints on one visit is normally more efficient than separate visits. We’ll give you a clear quote for the lot.
Asking for a quote
When you call or email, these details help:
- Where the property is
- How many joints, rooms or windows are involved
- Access, such as stairs, a lift or height
- The type of property
For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we will talk you through the work before giving you a price.
Surface by surface
Patio & French doors
The joints around patio doors run a long way, top, sides and threshold. The threshold and the bottom corners take the most water, so we pay close attention there.
Composite doors
An exposed front door gets wind-driven rain, and the top and bottom corners tend to fail first. Those corners get the most care.
Landlord and commercial work in Eton Wick
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
Other services in Eton Wick
Eton Wick questions
I let a flat near Windsor & Eton Central station. Can you help?
Yes, we work for letting agents and landlords. You can call 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Do you cover smaller places like Eton Wick?
Yes, Eton Wick is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can resealing stop a draught around my window?
If the draught is coming in around the frame, yes. If it’s coming through the window seals, we’ll tell you.
Is it messy?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Can you reach windows above the ground floor?
Yes, in most cases. Access is planned before work begins.
Can I add another job to the visit?
Yes. Several rooms, windows or areas can go on one quote.
Does the work come with a guarantee?
Yes, with our one-year guarantee. A yearly look at the joints helps them last.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Frames and glazing around Eton Wick
London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. Historic houses like Dorney Court (about 1.4 miles west) are a reminder that the area around Eton Wick has older buildings as well as new. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that is traditional sand mastic.
In the older streets around Church of Saint John the Baptist, frames set in older brick or stone need a sealant that suits the wall as well as the frame. If you look after a building such as Eton Wick CofE First School, larger buildings have plenty of frames, and the mastic around each one ages.
Eton Wick is about 1 mile north of Windsor, in Windsor and Maidenhead. Wherever you are in the SL4 postcode area, we cover window mastic for homes and businesses. Our Windsor and Maidenhead coverage runs to 57 places, Eton Wick among them. Our Reading page covers work nearby, about 15 miles away.
Work in SL4 is quoted and booked the same way as anywhere else. Local streets include Eton Wick Road, Princes Close and The Wheatbutts. Neighbouring places we cover for window mastic include Boveney (1 mile south-west), Clewer (1 mile south-east), Eton (1 mile east), Windsor (1 mile south) and Dedworth (1 mile south). Within a short drive, we also cover Maidenhead (4 miles west), Boyn Hill (5 miles west), North Ascot (6 miles south-west), Cookham (6 miles north-west), Furze Platt (5 miles north-west) and Broomhall (7 miles south).
What’s near Eton Wick
Typical jobs here are in homes near The Westgate School, Westgate School and Shepherds Hut pub and the streets around them. The nearest railway station is Windsor & Eton Central station, roughly 1.5 miles south-east. Well-known places in the area include The History On Wheels Museum (within half a mile north-east) and Windsor Castle (1.7 miles south-east). Green spaces nearby include Taplow Lake and Bray Pit.
Keeping the joints in good condition
Looking after new joints is easy:
- Paint up to the joint, not over it
- Repaint timber before it’s bare
- Clean frames with a soft cloth and soapy water
- Ventilate rooms so frames don’t stay wet inside
Try not to touch the new joint while it cures, for as long as we advise. Don’t point a pressure washer at the joints.
Draughts get worse, not better. As the old mastic shrinks further, more air gets through, and a cold room gets colder. A new joint closes it up.