Windsor and Maidenhead · England
Eton Wick Remedial Sealant
Remedial sealant for Eton Wick and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Movement joints that have split or pulled away
- A second bead peeling off the first
- Mould trapped under a layer of silicone
What we cannot put right
It helps to know what we cannot do:
- Water damage behind tiles that needs a tiler
- Cracks in the fitting rather than the joint
- A leaking trap, valve or supply pipe
Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly.
What we seal
- Expansion joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Failed movement joints
- Shrunken worktop sealant
Remedial sealant for homes and businesses in Eton Wick
In Eton Wick, as anywhere, remedial jobs tend to look alike: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. We strip each one back and start from scratch. Common call-outs are for movement joints that have split or pulled away and repeat leaks from the same joint, on mouldy bath & shower sealant, failed movement joints and botched or over-sealed joints.
Around Eton Wick, it’s houses and cottages rather than flats. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
Big or small, you get the same one-year guarantee.
- Location
- Eton Wick (SL4)
- Region
- Windsor and Maidenhead
- Cover
- One year on every job
- Price
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Looking after it afterwards
To keep the joints looking good and working properly:
- Keep the room well ventilated
- Check trays and worktops do not move
- Do not add new sealant on top of old
- Get the cause of a repeat leak found before resealing
Keep an eye on the joint at first, especially if movement was the problem. Should anything change, phone 0345 464 0079 or email us.
A failing joint rarely gets better on its own. Each use pushes more water behind the bead, into floors, walls or ceilings. Early action keeps it to a sealant job.
The process
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours, depending on how many layers have to come out. In a small place like Eton Wick, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- We finish neatly and point out anything that needs another trade.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- Tell us about any previous sealing or DIY attempts
- Tell us if parking is tricky
Getting a quote
We do not publish a price list. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or send us an email.
Related advice
What else we do in Eton Wick
Eton Wick questions
Do you work for landlords with property near Windsor & Eton Central station?
Yes, we work for landlords and agents. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before any work starts.
Do you work for hotels and guest houses in Eton Wick?
Yes. Hotel and guest-house work is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
Someone sealed over the old bead. Can you fix it?
Yes. We cut out all the layers and clean off the film, before resealing with a single bead.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
How long before the joint can be used?
It depends on the product and the temperature. We tell you how long to leave it before we go.
Do I have to be there?
That depends on where the joints are. For work indoors, someone needs to let us in.
Can I choose the sealant colour?
We will suggest a colour to suit the surroundings, from white and clear to greys and other shades. The product needed can limit the range.
Can you remove old sealant without damaging the bath?
Yes. We avoid heavy scraping and use the right cleaner for each surface.
How the job changes by surface
Worktops & kitchens
Shrunken worktop sealant leaves a gap that lets water into the back edge. It’s cut out, degreased and resealed colour-matched to the worktop.
Over-sealed & botched joints
Thick, smeared sealant looks messy and hides problems. We strip it back so we can see the joint, and then we reseal it neatly.
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Landlord and commercial work in Eton Wick
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Common problems we fix in Eton Wick
Even good sealant ages. Mould grows into the silicone, the surface hardens and the bead shrinks, faster where ventilation is poor. At that point it has to come out.
Common reasons people contact us are:
- A second bead peeling off the first
- Leaks that keep coming back after resealing
- Mould trapped under a layer of silicone
- Thick, messy sealant smeared over tiles
For an older house near a landmark such as Church of Saint John the Baptist, older homes can move a little, which is hard on rigid grout and tired sealant.
Questions to ask before you book
- What happens if the job turns out different
- What preparation is included
- Is VAT in the price?
- Which sealant they’ll use, and why
What remedial sealant looks like in Eton Wick
Eton Wick has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
For site and facilities teams at buildings such as Eton Wick CofE First School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. If you let a flat or house near Windsor & Eton Central station, a joint that keeps failing is best fixed properly while the property is empty.
Eton Wick is about 1 mile north of Windsor, in Windsor and Maidenhead. Eton Wick gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Eton Wick is one of 57 towns and villages in Windsor and Maidenhead we cover for remedial sealant. Reading is on our list too, about 15 miles from Eton Wick.
Postcode districts we cover here for remedial sealant: SL4. That includes homes and businesses on Eton Wick Road, Princes Close and The Wheatbutts. Neighbouring places we cover for remedial sealant include Boveney (1 mile south-west), Clewer (1 mile south-east), Eton (1 mile east), Windsor (1 mile south) and Dedworth (1 mile south). We also work in nearby towns such as Maidenhead (4 miles west), Boyn Hill (5 miles west), North Ascot (6 miles south-west), Cookham (6 miles north-west), Furze Platt (5 miles north-west) and Broomhall (7 miles south).
What’s near Eton Wick
Locally, jobs take us to homes and businesses close to The Westgate School, Westgate School and Shepherds Hut pub and the streets around them. The closest station to Eton Wick is Windsor & Eton Central station, roughly 1.5 miles south-east. A little further out are The History On Wheels Museum (under half a mile north-east) and Windsor Castle (1.7 miles south-east). For a walk, there’s Taplow Lake and Bray Pit.